Piotr Dymacz e767980eb8 ar71xx: add support for Wallys DR531 ... Wallys DR531 is based on Qualcomm Atheros QCA9531 v2. Short specification: - 550/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SE2576L), up to 30 dBm - 2x MMCX connectors - mini-PCIe connector with PCIe/USB buses and SIM slot - 7x LED, 1x button, 1x optional buzzer - UART, (E)JTAG and LED headers Default configuration: - WAN on eth1 (RJ45 near DC jack) - LAN on eth0 (RJ45 near button) - S4 LED set to be status LED - all LEDs configurable form user space - button configured for reset Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-dr531-squashfs-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2016-07-13 20:03:10 +02:00
..
imagebuilder	build: split scripts/metadata.pl into target-metadata.pl and package-metadata.pl	2016-06-07 08:58:40 +02:00
linux	ar71xx: add support for Wallys DR531	2016-07-13 20:03:10 +02:00
sdk	sdk: Allow to configure signed pacakge lists	2016-07-13 20:03:10 +02:00
toolchain	IB/SDK/toolchain: use lower cases filenames	2016-06-01 17:54:36 +02:00
Config.in	tools: add kernel2minor utility for Mikrotik devices	2016-07-05 22:59:14 +02:00
Makefile	target: do not make target/*/install depend on target/*/compile - removes one redundant kernel build dir call on target/install	2012-06-06 17:24:05 +00:00