KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/package/network/services/hostapd/files/hostapd.sh
Daniel Golle eba3b028e4 hostapd: update to git snapshot of 2018-03-26 
The following patches were merged upstream:
000-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch
 replaced by commit 0e3bd7ac6
001-Prevent-reinstallation-of-an-already-in-use-group-ke.patch
 replaced by commit cb5132bb3
002-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch
 replaced by commit 87e2db16b
003-Prevent-installation-of-an-all-zero-TK.patch
 replaced by commit 53bb18cc8
004-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch
 replaced by commit 0adc9b28b
005-TDLS-Reject-TPK-TK-reconfiguration.patch
 replaced by commit ff89af96e
006-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch
 replaced by commit adae51f8b
007-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch
 replaced by commit 2a9c5217b
008-WPA-Extra-defense-against-PTK-reinstalls-in-4-way-ha.patch
 replaced by commit a00e946c1
009-Clear-PMK-length-and-check-for-this-when-deriving-PT.patch
 replaced by commit b488a1294
010-Optional-AP-side-workaround-for-key-reinstallation-a.patch
 replaced by commit 6f234c1e2
011-Additional-consistentcy-checks-for-PTK-component-len.patch
 replaced by commit a6ea66530
012-Clear-BSSID-information-in-supplicant-state-machine-.patch
 replaced by commit c0fe5f125
013-WNM-Ignore-WNM-Sleep-Mode-Request-in-wnm_sleep_mode-.patch
 replaced by commit 114f2830d

Some patches had to be modified to work with changed upstream source:
380-disable_ctrl_iface_mib.patch (adding more ifdef'ery)
plus some minor knits needed for other patches to apply which are not
worth being explicitely listed here.

For SAE key management in mesh mode, use the newly introduce
sae_password parameter instead of the psk parameter to also support
SAE keys which would fail the checks applied on the psk field (ie.
length and such). This fixes compatibility issues for users migrating
from authsae.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-03-27 19:25:32 +02:00

839 lines
23 KiB
Bash
Raw Blame History

. /lib/functions/network.sh
wpa_supplicant_add_rate() {
local var="$1"
local val="$(($2 / 1000))"
local sub="$((($2 / 100) % 10))"
append $var "$val" ","
[ $sub -gt 0 ] && append $var "."
}
hostapd_add_rate() {
local var="$1"
local val="$(($2 / 100))"
append $var "$val" " "
}
hostapd_append_wep_key() {
local var="$1"
wep_keyidx=0
set_default key 1
case "$key" in
[1234])
for idx in 1 2 3 4; do
local zidx
zidx=$(($idx - 1))
json_get_var ckey "key${idx}"
[ -n "$ckey" ] && \
append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T"
done
wep_keyidx=$((key - 1))
;;
*)
append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T"
;;
esac
}
hostapd_append_wpa_key_mgmt() {
local auth_type="$(echo $auth_type | tr 'a-z' 'A-Z')"
append wpa_key_mgmt "WPA-$auth_type"
[ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-${auth_type}"
[ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type}-SHA256"
}
hostapd_add_log_config() {
config_add_boolean \
log_80211 \
log_8021x \
log_radius \
log_wpa \
log_driver \
log_iapp \
log_mlme
config_add_int log_level
}
hostapd_common_add_device_config() {
config_add_array basic_rate
config_add_array supported_rates
config_add_string country
config_add_boolean country_ie doth
config_add_string require_mode
config_add_boolean legacy_rates
config_add_string acs_chan_bias
config_add_array hostapd_options
hostapd_add_log_config
}
hostapd_prepare_device_config() {
local config="$1"
local driver="$2"
local base="${config%%.conf}"
local base_cfg=
json_get_vars country country_ie beacon_int:100 doth require_mode legacy_rates acs_chan_bias
hostapd_set_log_options base_cfg
set_default country_ie 1
set_default doth 1
set_default legacy_rates 1
[ "$hwmode" = "b" ] && legacy_rates=1
[ -n "$country" ] && {
append base_cfg "country_code=$country" "$N"
[ "$country_ie" -gt 0 ] && append base_cfg "ieee80211d=1" "$N"
[ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
}
[ -n "$acs_chan_bias" ] && append base_cfg "acs_chan_bias=$acs_chan_bias" "$N"
local brlist= br
json_get_values basic_rate_list basic_rate
local rlist= r
json_get_values rate_list supported_rates
[ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N"
[ "$legacy_rates" -eq 0 ] && set_default require_mode g
[ "$hwmode" = "g" ] && {
[ "$legacy_rates" -eq 0 ] && set_default rate_list "6000 9000 12000 18000 24000 36000 48000 54000"
[ -n "$require_mode" ] && set_default basic_rate_list "6000 12000 24000"
}
case "$require_mode" in
n) append base_cfg "require_ht=1" "$N";;
ac) append base_cfg "require_vht=1" "$N";;
esac
for r in $rate_list; do
hostapd_add_rate rlist "$r"
done
for br in $basic_rate_list; do
hostapd_add_rate brlist "$br"
done
[ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
[ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
append base_cfg "beacon_int=$beacon_int" "$N"
json_get_values opts hostapd_options
for val in $opts; do
append base_cfg "$val" "$N"
done
cat > "$config" <<EOF
driver=$driver
$base_cfg
EOF
}
hostapd_common_add_bss_config() {
config_add_string 'bssid:macaddr' 'ssid:string'
config_add_boolean wds wmm uapsd hidden
config_add_int maxassoc max_inactivity
config_add_boolean disassoc_low_ack isolate short_preamble
config_add_int \
wep_rekey eap_reauth_period \
wpa_group_rekey wpa_pair_rekey wpa_master_rekey
config_add_boolean wpa_disable_eapol_key_retries
config_add_boolean tdls_prohibit
config_add_boolean rsn_preauth auth_cache
config_add_int ieee80211w
config_add_int eapol_version
config_add_string 'auth_server:host' 'server:host'
config_add_string auth_secret
config_add_int 'auth_port:port' 'port:port'
config_add_string acct_server
config_add_string acct_secret
config_add_int acct_port
config_add_int acct_interval
config_add_string dae_client
config_add_string dae_secret
config_add_int dae_port
config_add_string nasid
config_add_string ownip
config_add_string radius_client_addr
config_add_string iapp_interface
config_add_string eap_type ca_cert client_cert identity anonymous_identity auth priv_key priv_key_pwd
config_add_string ieee80211w_mgmt_cipher
config_add_int dynamic_vlan vlan_naming
config_add_string vlan_tagged_interface vlan_bridge
config_add_string vlan_file
config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
config_add_string wpa_psk_file
config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
config_add_int wps_ap_setup_locked wps_independent
config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
config_add_boolean ieee80211v wnm_sleep_mode bss_transition
config_add_int time_advertisement
config_add_string time_zone
config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
config_add_int r0_key_lifetime reassociation_deadline
config_add_string mobility_domain r1_key_holder
config_add_array r0kh r1kh
config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
config_add_string macfilter 'macfile:file'
config_add_array 'maclist:list(macaddr)'
config_add_array bssid_blacklist
config_add_array bssid_whitelist
config_add_int mcast_rate
config_add_array basic_rate
config_add_array supported_rates
}
hostapd_set_bss_options() {
local var="$1"
local phy="$2"
local vif="$3"
wireless_vif_parse_encryption
local bss_conf
local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
json_get_vars \
wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey \
wpa_disable_eapol_key_retries tdls_prohibit \
maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 wps_ap_setup_locked \
wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
macfilter ssid wmm uapsd hidden short_preamble rsn_preauth \
iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
acct_server acct_secret acct_port acct_interval
set_default isolate 0
set_default maxassoc 0
set_default max_inactivity 0
set_default short_preamble 1
set_default disassoc_low_ack 1
set_default hidden 0
set_default wmm 1
set_default uapsd 1
set_default wpa_disable_eapol_key_retries 0
set_default tdls_prohibit 0
set_default eapol_version 0
set_default acct_port 1813
append bss_conf "ctrl_interface=/var/run/hostapd"
if [ "$isolate" -gt 0 ]; then
append bss_conf "ap_isolate=$isolate" "$N"
fi
if [ "$maxassoc" -gt 0 ]; then
append bss_conf "max_num_sta=$maxassoc" "$N"
fi
if [ "$max_inactivity" -gt 0 ]; then
append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
fi
append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
append bss_conf "preamble=$short_preamble" "$N"
append bss_conf "wmm_enabled=$wmm" "$N"
append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
[ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"
[ "$wpa" -gt 0 ] && {
[ -n "$wpa_group_rekey" ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
[ -n "$wpa_pair_rekey" ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey" "$N"
[ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey" "$N"
}
[ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
[ -n "$acct_server" ] && {
append bss_conf "acct_server_addr=$acct_server" "$N"
append bss_conf "acct_server_port=$acct_port" "$N"
[ -n "$acct_secret" ] && \
append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
[ -n "$acct_interval" ] && \
append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
}
local vlan_possible=""
case "$auth_type" in
none)
wps_possible=1
# Here we make the assumption that if we're in open mode
# with WPS enabled, we got to be in unconfigured state.
wps_not_configured=1
;;
psk)
json_get_vars key wpa_psk_file
if [ ${#key} -lt 8 ]; then
wireless_setup_vif_failed INVALID_WPA_PSK
return 1
elif [ ${#key} -eq 64 ]; then
append bss_conf "wpa_psk=$key" "$N"
else
append bss_conf "wpa_passphrase=$key" "$N"
fi
[ -n "$wpa_psk_file" ] && {
[ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
}
[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
wps_possible=1
;;
eap)
json_get_vars \
auth_server auth_secret auth_port \
dae_client dae_secret dae_port \
ownip radius_client_addr \
eap_reauth_period
# radius can provide VLAN ID for clients
vlan_possible=1
# legacy compatibility
[ -n "$auth_server" ] || json_get_var auth_server server
[ -n "$auth_port" ] || json_get_var auth_port port
[ -n "$auth_secret" ] || json_get_var auth_secret key
set_default auth_port 1812
set_default dae_port 3799
append bss_conf "auth_server_addr=$auth_server" "$N"
append bss_conf "auth_server_port=$auth_port" "$N"
append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
[ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
[ -n "$dae_client" -a -n "$dae_secret" ] && {
append bss_conf "radius_das_port=$dae_port" "$N"
append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
}
[ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
[ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
append bss_conf "eapol_key_index_workaround=1" "$N"
append bss_conf "ieee8021x=1" "$N"
[ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
;;
wep)
local wep_keyidx=0
json_get_vars key
hostapd_append_wep_key bss_conf
append bss_conf "wep_default_key=$wep_keyidx" "$N"
[ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N"
;;
esac
local auth_algs=$((($auth_mode_shared << 1) | $auth_mode_open))
append bss_conf "auth_algs=${auth_algs:-1}" "$N"
append bss_conf "wpa=$wpa" "$N"
[ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N"
set_default wps_pushbutton 0
set_default wps_label 0
set_default wps_pbc_in_m1 0
config_methods=
[ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
[ "$wps_label" -gt 0 ] && append config_methods label
[ -n "$wps_possible" -a -n "$config_methods" ] && {
set_default ext_registrar 0
set_default wps_device_type "6-0050F204-1"
set_default wps_device_name "OpenWrt AP"
set_default wps_manufacturer "www.openwrt.org"
set_default wps_independent 1
wps_state=2
[ -n "$wps_configured" ] && wps_state=1
[ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
append bss_conf "eap_server=1" "$N"
[ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
append bss_conf "wps_state=$wps_state" "$N"
append bss_conf "device_type=$wps_device_type" "$N"
append bss_conf "device_name=$wps_device_name" "$N"
append bss_conf "manufacturer=$wps_manufacturer" "$N"
append bss_conf "config_methods=$config_methods" "$N"
append bss_conf "wps_independent=$wps_independent" "$N"
[ -n "$wps_ap_setup_locked" ] && append bss_conf "ap_setup_locked=$wps_ap_setup_locked" "$N"
[ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
}
append bss_conf "ssid=$ssid" "$N"
[ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge" "$N"
[ -n "$iapp_interface" ] && {
local ifname
network_get_device ifname "$iapp_interface" || ifname="$iapp_interface"
append bss_conf "iapp_interface=$ifname" "$N"
}
json_get_vars ieee80211v
set_default ieee80211v 0
if [ "$ieee80211v" -eq "1" ]; then
json_get_vars time_advertisement time_zone wnm_sleep_mode bss_transition
set_default time_advertisement 0
set_default wnm_sleep_mode 0
set_default bss_transition 0
append bss_conf "time_advertisement=$time_advertisement" "$N"
[ -n "$time_zone" ] && append bss_conf "time_zone=$time_zone" "$N"
append bss_conf "wnm_sleep_mode=$wnm_sleep_mode" "$N"
append bss_conf "bss_transition=$bss_transition" "$N"
fi
if [ "$wpa" -ge "1" ]; then
json_get_vars ieee80211r
set_default ieee80211r 0
if [ "$ieee80211r" -gt "0" ]; then
json_get_vars mobility_domain r0_key_lifetime r1_key_holder \
reassociation_deadline pmk_r1_push ft_psk_generate_local ft_over_ds
json_get_values r0kh r0kh
json_get_values r1kh r1kh
set_default mobility_domain "4f57"
set_default r0_key_lifetime 10000
set_default reassociation_deadline 1000
set_default pmk_r1_push 0
set_default ft_psk_generate_local 0
set_default ft_over_ds 1
append bss_conf "mobility_domain=$mobility_domain" "$N"
append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
[ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
append bss_conf "ft_over_ds=$ft_over_ds" "$N"
for kh in $r0kh; do
append bss_conf "r0kh=${kh//,/ }" "$N"
done
for kh in $r1kh; do
append bss_conf "r1kh=${kh//,/ }" "$N"
done
fi
append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
hostapd_append_wpa_key_mgmt
[ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
fi
if [ "$wpa" -ge "2" ]; then
if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
set_default auth_cache 1
append bss_conf "rsn_preauth=1" "$N"
append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
else
set_default auth_cache 0
fi
append bss_conf "okc=$auth_cache" "$N"
[ "$auth_cache" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N"
# RSN -> allow management frame protection
case "$ieee80211w" in
[012])
json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout
append bss_conf "ieee80211w=$ieee80211w" "$N"
[ "$ieee80211w" -gt "0" ] && {
append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N"
[ -n "$ieee80211w_max_timeout" ] && \
append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
[ -n "$ieee80211w_retry_timeout" ] && \
append bss_conf "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
}
;;
esac
fi
_macfile="/var/run/hostapd-$ifname.maclist"
case "$macfilter" in
allow)
append bss_conf "macaddr_acl=1" "$N"
append bss_conf "accept_mac_file=$_macfile" "$N"
# accept_mac_file can be used to set MAC to VLAN ID mapping
vlan_possible=1
;;
deny)
append bss_conf "macaddr_acl=0" "$N"
append bss_conf "deny_mac_file=$_macfile" "$N"
;;
*)
_macfile=""
;;
esac
[ -n "$_macfile" ] && {
json_get_vars macfile
json_get_values maclist maclist
rm -f "$_macfile"
(
for mac in $maclist; do
echo "$mac"
done
[ -n "$macfile" -a -f "$macfile" ] && cat "$macfile"
) > "$_macfile"
}
[ -n "$vlan_possible" -a -n "$dynamic_vlan" ] && {
json_get_vars vlan_naming vlan_tagged_interface vlan_bridge vlan_file
set_default vlan_naming 1
append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
append bss_conf "vlan_naming=$vlan_naming" "$N"
[ -n "$vlan_bridge" ] && \
append bss_conf "vlan_bridge=$vlan_bridge" "$N"
[ -n "$vlan_tagged_interface" ] && \
append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
[ -n "$vlan_file" ] && {
[ -e "$vlan_file" ] || touch "$vlan_file"
append bss_conf "vlan_file=$vlan_file" "$N"
}
}
append "$var" "$bss_conf" "$N"
return 0
}
hostapd_set_log_options() {
local var="$1"
local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
json_get_vars log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
set_default log_level 2
set_default log_80211 1
set_default log_8021x 1
set_default log_radius 1
set_default log_wpa 1
set_default log_driver 1
set_default log_iapp 1
set_default log_mlme 1
local log_mask=$(( \
($log_80211 << 0) | \
($log_8021x << 1) | \
($log_radius << 2) | \
($log_wpa << 3) | \
($log_driver << 4) | \
($log_iapp << 5) | \
($log_mlme << 6) \
))
append "$var" "logger_syslog=$log_mask" "$N"
append "$var" "logger_syslog_level=$log_level" "$N"
append "$var" "logger_stdout=$log_mask" "$N"
append "$var" "logger_stdout_level=$log_level" "$N"
return 0
}
_wpa_supplicant_common() {
local ifname="$1"
_rpath="/var/run/wpa_supplicant"
_config="${_rpath}-$ifname.conf"
}
wpa_supplicant_teardown_interface() {
_wpa_supplicant_common "$1"
rm -rf "$_rpath/$1" "$_config"
}
wpa_supplicant_prepare_interface() {
local ifname="$1"
_w_driver="$2"
_wpa_supplicant_common "$1"
json_get_vars mode wds
[ -n "$network_bridge" ] && {
fail=
case "$mode" in
adhoc)
fail=1
;;
sta)
[ "$wds" = 1 ] || fail=1
;;
esac
[ -n "$fail" ] && {
wireless_setup_vif_failed BRIDGE_NOT_ALLOWED
return 1
}
}
local ap_scan=
_w_mode="$mode"
_w_modestr=
[[ "$mode" = adhoc ]] && {
ap_scan="ap_scan=2"
_w_modestr="mode=1"
}
local country_str=
[ -n "$country" ] && {
country_str="country=$country"
}
wpa_supplicant_teardown_interface "$ifname"
cat > "$_config" <<EOF
$ap_scan
$country_str
EOF
return 0
}
wpa_supplicant_set_fixed_freq() {
local freq="$1"
local htmode="$2"
append network_data "fixed_freq=1" "$N$T"
append network_data "frequency=$freq" "$N$T"
case "$htmode" in
NOHT) append network_data "disable_ht=1" "$N$T";;
HT20|VHT20) append network_data "disable_ht40=1" "$N$T";;
HT40*|VHT40*|VHT80*|VHT160*) append network_data "ht40=1" "$N$T";;
esac
case "$htmode" in
VHT*) append network_data "vht=1" "$N$T";;
esac
case "$htmode" in
VHT80) append network_data "max_oper_chwidth=1" "$N$T";;
VHT160) append network_data "max_oper_chwidth=2" "$N$T";;
*) append network_data "max_oper_chwidth=0" "$N$T";;
esac
}
wpa_supplicant_add_network() {
local ifname="$1"
local freq="$2"
local htmode="$3"
_wpa_supplicant_common "$1"
wireless_vif_parse_encryption
json_get_vars \
ssid bssid key \
basic_rate mcast_rate \
ieee80211w ieee80211r
set_default ieee80211r 0
local key_mgmt='NONE'
local enc_str=
local network_data=
local T=" "
local scan_ssid="scan_ssid=1"
local freq wpa_key_mgmt
[[ "$_w_mode" = "adhoc" ]] && {
append network_data "mode=1" "$N$T"
[ -n "$channel" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
scan_ssid="scan_ssid=0"
[ "$_w_driver" = "nl80211" ] || append wpa_key_mgmt "WPA-NONE"
}
[[ "$_w_mode" = "mesh" ]] && {
json_get_vars mesh_id
ssid="${mesh_id}"
append network_data "mode=5" "$N$T"
[ -n "$channel" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
append wpa_key_mgmt "SAE"
scan_ssid=""
}
[ "$_w_mode" = "adhoc" -o "$_w_mode" = "mesh" ] && append network_data "$_w_modestr" "$N$T"
case "$auth_type" in
none) ;;
wep)
local wep_keyidx=0
hostapd_append_wep_key network_data
append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T"
;;
psk)
local passphrase
if [ "$_w_mode" != "mesh" ]; then
hostapd_append_wpa_key_mgmt
fi
key_mgmt="$wpa_key_mgmt"
if [ ${#key} -eq 64 ]; then
passphrase="psk=${key}"
else
if [ "$_w_mode" = "mesh" ]; then
passphrase="sae_password=\"${key}\""
else
passphrase="psk=\"${key}\""
fi
fi
append network_data "$passphrase" "$N$T"
;;
eap)
hostapd_append_wpa_key_mgmt
key_mgmt="$wpa_key_mgmt"
json_get_vars eap_type identity anonymous_identity ca_cert
[ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
[ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
[ -n "$anonymous_identity" ] && append network_data "anonymous_identity=\"$anonymous_identity\"" "$N$T"
case "$eap_type" in
tls)
json_get_vars client_cert priv_key priv_key_pwd
append network_data "client_cert=\"$client_cert\"" "$N$T"
append network_data "private_key=\"$priv_key\"" "$N$T"
append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
;;
fast|peap|ttls)
json_get_vars auth password ca_cert2 client_cert2 priv_key2 priv_key2_pwd
set_default auth MSCHAPV2
if [ "$auth" = "EAP-TLS" ]; then
[ -n "$ca_cert2" ] &&
append network_data "ca_cert2=\"$ca_cert2\"" "$N$T"
append network_data "client_cert2=\"$client_cert2\"" "$N$T"
append network_data "private_key2=\"$priv_key2\"" "$N$T"
append network_data "private_key2_passwd=\"$priv_key2_pwd\"" "$N$T"
else
append network_data "password=\"$password\"" "$N$T"
fi
phase2proto="auth="
case "$auth" in
"auth"*)
phase2proto=""
;;
"EAP-"*)
auth="$(echo $auth | cut -b 5- )"
[ "$eap_type" = "ttls" ] &&
phase2proto="autheap="
;;
esac
append network_data "phase2=\"$phase2proto$auth\"" "$N$T"
;;
esac
append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
;;
esac
[ "$mode" = mesh ] || {
case "$wpa" in
1)
append network_data "proto=WPA" "$N$T"
;;
2)
append network_data "proto=RSN" "$N$T"
;;
esac
case "$ieee80211w" in
[012])
[ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
;;
esac
}
[ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
[ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
local bssid_blacklist bssid_whitelist
json_get_values bssid_blacklist bssid_blacklist
json_get_values bssid_whitelist bssid_whitelist
[ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T"
[ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T"
[ -n "$basic_rate" ] && {
local br rate_list=
for br in $basic_rate; do
wpa_supplicant_add_rate rate_list "$br"
done
[ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
}
[ -n "$mcast_rate" ] && {
local mc_rate=
wpa_supplicant_add_rate mc_rate "$mcast_rate"
append network_data "mcast_rate=$mc_rate" "$N$T"
}
cat >> "$_config" <<EOF
network={
$scan_ssid
ssid="$ssid"
key_mgmt=$key_mgmt
$network_data
}
EOF
return 0
}
wpa_supplicant_run() {
local ifname="$1"; shift
_wpa_supplicant_common "$ifname"
/usr/sbin/wpa_supplicant -B \
${network_bridge:+-b $network_bridge} \
-P "/var/run/wpa_supplicant-${ifname}.pid" \
-D ${_w_driver:-wext} \
-i "$ifname" \
-c "$_config" \
-C "$_rpath" \
"$@"
ret="$?"
wireless_add_process "$(cat "/var/run/wpa_supplicant-${ifname}.pid")" /usr/sbin/wpa_supplicant 1
[ "$ret" != 0 ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
return $ret
}
hostapd_common_cleanup() {
killall hostapd wpa_supplicant meshd-nl80211
}
Reference in a new issue View git blame Copy permalink