bf28fb50bf
As usual, this patches were taken (and rebased) from https://github.com/raspberrypi/linux/commits/rpi-4.1.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47258
92 lines
3.1 KiB
Diff
92 lines
3.1 KiB
Diff
From 502a751c5b49d0730f25280345d145e26f0b671d Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Fri, 11 Sep 2015 09:14:01 +0100
|
|
Subject: [PATCH 178/203] BCM270X_DT: Use fixed-factor-clock for uart1
|
|
|
|
The BCM2835 mini-UART is almost 8250-compatible, but there is
|
|
a factor-of-two difference in the clock divider for the baud rate.
|
|
The standard 8250 driver can be used unmodified provided we lie to it
|
|
about the clock frequency, pretending it is double the actual value.
|
|
The mini-UART block shares the core clock, and the current firmware
|
|
uses a DT-parameter to update the clock-frequency property. Although it
|
|
works, this isn't ideal because it exposes the firmware to a driver
|
|
problem.
|
|
|
|
This patch uses the fixed-factor-clock module to create a clock that is
|
|
always twice the frequency of the core clock. (N.B. These "fixed" clocks
|
|
just describe an existing clock, rather than changing any hardware
|
|
settings.)
|
|
---
|
|
arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 1 -
|
|
arch/arm/boot/dts/bcm2708-rpi-b.dts | 1 -
|
|
arch/arm/boot/dts/bcm2708-rpi-cm.dts | 1 -
|
|
arch/arm/boot/dts/bcm2708_common.dtsi | 10 +++++++++-
|
|
arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 1 -
|
|
5 files changed, 9 insertions(+), 5 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
|
|
@@ -103,7 +103,6 @@
|
|
__overrides__ {
|
|
uart0 = <&uart0>,"status";
|
|
uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
|
|
- uart1_clkrate = <&uart1>,"clock-frequency:0";
|
|
i2s = <&i2s>,"status";
|
|
spi = <&spi0>,"status";
|
|
i2c0 = <&i2c0>,"status";
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
|
|
@@ -97,7 +97,6 @@
|
|
__overrides__ {
|
|
uart0 = <&uart0>,"status";
|
|
uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
|
|
- uart1_clkrate = <&uart1>,"clock-frequency:0";
|
|
i2s = <&i2s>,"status";
|
|
spi = <&spi0>,"status";
|
|
i2c0 = <&i2c0>,"status";
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
|
|
@@ -79,7 +79,6 @@
|
|
__overrides__ {
|
|
uart0 = <&uart0>,"status";
|
|
uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
|
|
- uart1_clkrate = <&uart1>,"clock-frequency:0";
|
|
i2s = <&i2s>,"status";
|
|
spi = <&spi0>,"status";
|
|
i2c0 = <&i2c0>,"status";
|
|
--- a/arch/arm/boot/dts/bcm2708_common.dtsi
|
|
+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
|
|
@@ -165,7 +165,7 @@
|
|
compatible = "brcm,bcm2835-aux-uart", "ns16550";
|
|
reg = <0x7e215040 0x40>;
|
|
interrupts = <1 29>;
|
|
- clock-frequency = <500000000>;
|
|
+ clocks = <&clk_uart1>;
|
|
reg-shift = <2>;
|
|
no-loopback-test;
|
|
status = "disabled";
|
|
@@ -294,6 +294,14 @@
|
|
clock-output-names = "pwm";
|
|
clock-frequency = <100000000>;
|
|
};
|
|
+
|
|
+ clk_uart1: clock@6 {
|
|
+ compatible = "fixed-factor-clock";
|
|
+ clocks = <&clk_core>;
|
|
+ #clock-cells = <0>;
|
|
+ clock-div = <1>;
|
|
+ clock-mult = <2>;
|
|
+ };
|
|
};
|
|
|
|
__overrides__ {
|
|
--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
|
|
+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
|
|
@@ -103,7 +103,6 @@
|
|
__overrides__ {
|
|
uart0 = <&uart0>,"status";
|
|
uart0_clkrate = <&clk_uart0>,"clock-frequency:0";
|
|
- uart1_clkrate = <&uart1>,"clock-frequency:0";
|
|
i2s = <&i2s>,"status";
|
|
spi = <&spi0>,"status";
|
|
i2c0 = <&i2c0>,"status";
|