openwrtv4/target/linux/lantiq/patches/270-crypto.patch
2011-03-11 08:19:53 +00:00

6197 lines
162 KiB
Diff

--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -252,4 +252,75 @@
OMAP processors have AES module accelerator. Select this if you
want to use the OMAP module for AES algorithms.
+config CRYPTO_DEV_LANTIQ
+ tristate "Support for Lantiq crypto engine"
+ select CRYPTO_ALGAPI
+ default y
+ help
+ Will support Lantiq crypto hardware
+ If you are unsure, say M.
+
+menuconfig CRYPTO_DEV_LANTIQ_DES
+ bool "Lantiq crypto hardware for DES algorithm"
+ depends on CRYPTO_DEV_LANTIQ
+ select CRYPTO_BLKCIPHER
+ default y
+ help
+ Use crypto hardware for DES/3DES algorithm.
+ If unsure say N.
+
+menuconfig CRYPTO_DEV_LANTIQ_AES
+ bool "Lantiq crypto hardware for AES algorithm"
+ depends on CRYPTO_DEV_LANTIQ
+ select CRYPTO_BLKCIPHER
+ default y
+ help
+ Use crypto hardware for AES algorithm.
+ If unsure say N.
+
+menuconfig CRYPTO_DEV_LANTIQ_ARC4
+ bool "Lantiq crypto hardware for ARC4 algorithm"
+ depends on (CRYPTO_DEV_LANTIQ && IFXMIPS_AR9)
+ select CRYPTO_BLKCIPHER
+ default y
+ help
+ Use crypto hardware for ARC4 algorithm.
+ If unsure say N.
+
+menuconfig CRYPTO_DEV_LANTIQ_MD5
+ bool "Lantiq crypto hardware for MD5 algorithm"
+ depends on CRYPTO_DEV_LANTIQ
+ select CRYPTO_BLKCIPHER
+ default y
+ help
+ Use crypto hardware for MD5 algorithm.
+ If unsure say N.
+
+menuconfig CRYPTO_DEV_LANTIQ_SHA1
+ bool "Lantiq crypto hardware for SHA1 algorithm"
+ depends on CRYPTO_DEV_LANTIQ
+ select CRYPTO_BLKCIPHER
+ default y
+ help
+ Use crypto hardware for SHA1 algorithm.
+ If unsure say N.
+
+menuconfig CRYPTO_DEV_LANTIQ_SHA1_HMAC
+ bool "Lantiq crypto hardware for SHA1_HMAC algorithm"
+ depends on (CRYPTO_DEV_LANTIQ && IFXMIPS_AR9)
+ select CRYPTO_BLKCIPHER
+ default y
+ help
+ Use crypto hardware for SHA1_HMAC algorithm.
+ If unsure say N.
+
+menuconfig CRYPTO_DEV_LANTIQ_MD5_HMAC
+ bool "Lantiq crypto hardware for MD5_HMAC algorithms"
+ depends on (CRYPTO_DEV_LANTIQ && IFXMIPS_AR9)
+ select CRYPTO_BLKCIPHER
+ default y
+ help
+ Use crypto hardware for MD5_HMAC algorithm.
+ If unsure say N.
+
endif # CRYPTO_HW
--- /dev/null
+++ b/drivers/crypto/lantiq/Makefile
@@ -0,0 +1,11 @@
+obj-$(CONFIG_CRYPTO_DEV_LANTIQ) += deu.o
+obj-$(CONFIG_CRYPTO_DEV_LANTIQ) += deu_falcon.o
+obj-$(CONFIG_CRYPTO_DEV_LANTIQ) += deu_danube.o
+obj-$(CONFIG_CRYPTO_DEV_LANTIQ) += deu_ar9.o
+obj-$(CONFIG_CRYPTO_DEV_LANTIQ_DES) += des.o
+obj-$(CONFIG_CRYPTO_DEV_LANTIQ_AES) += aes.o
+obj-$(CONFIG_CRYPTO_DEV_LANTIQ_ARC4) += arc4.o
+obj-$(CONFIG_CRYPTO_DEV_LANTIQ_SHA1) += sha1.o
+obj-$(CONFIG_CRYPTO_DEV_LANTIQ_SHA1_HMAC) += sha1_hmac.o
+obj-$(CONFIG_CRYPTO_DEV_LANTIQ_MD5) += md5.o
+obj-$(CONFIG_CRYPTO_DEV_LANTIQ_MD5_HMAC) += md5_hmac.o
--- /dev/null
+++ b/drivers/crypto/lantiq/aes.c
@@ -0,0 +1,1029 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief Lantiq DEU driver module
+*/
+
+/**
+ \file aes.c
+ \ingroup LQ_DEU
+ \brief AES Encryption Driver main file
+*/
+
+/**
+ \defgroup LQ_AES_FUNCTIONS LQ_AES_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief Lantiq AES driver Functions
+*/
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/crypto.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/byteorder.h>
+#include <crypto/algapi.h>
+#include "deu.h"
+
+#ifdef CONFIG_CRYPTO_DEV_DMA
+# include "deu_dma.h"
+#endif
+
+static spinlock_t cipher_lock;
+
+/* Definition of constants */
+
+#define AES_MIN_KEY_SIZE 16
+#define AES_MAX_KEY_SIZE 32
+#define AES_BLOCK_SIZE 16
+#define CTR_RFC3686_NONCE_SIZE 4
+#define CTR_RFC3686_IV_SIZE 8
+#define CTR_RFC3686_MAX_KEY_SIZE (AES_MAX_KEY_SIZE \
+ + CTR_RFC3686_NONCE_SIZE)
+
+struct aes_ctx {
+ int key_length;
+ u32 buf[AES_MAX_KEY_SIZE];
+ u8 nonce[CTR_RFC3686_NONCE_SIZE];
+};
+
+/** \fn int aes_set_key(struct crypto_tfm *tfm, const uint8_t *in_key, unsigned int key_len)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief sets the AES keys
+ * \param tfm linux crypto algo transform
+ * \param in_key input key
+ * \param key_len key lengths of 16, 24 and 32 bytes supported
+ * \return -EINVAL - bad key length, 0 - SUCCESS
+*/
+static int aes_set_key(struct crypto_tfm *tfm,
+ const u8 *in_key,
+ unsigned int key_len)
+{
+ struct aes_ctx *ctx = crypto_tfm_ctx(tfm);
+ u32 *flags = &tfm->crt_flags;
+
+ DPRINTF(0, "ctx @%p, key_len %d\n", ctx, key_len);
+
+ if (key_len != 16 && key_len != 24 && key_len != 32) {
+ *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+ return -EINVAL;
+ }
+
+ ctx->key_length = key_len;
+ memcpy((u8 *)(ctx->buf), in_key, key_len);
+
+ return 0;
+}
+
+#ifndef CONFIG_CRYPTO_DEV_DMA
+/** \fn void deu_aes(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, size_t nbytes, int encdec, int mode)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief main interface to AES hardware
+ * \param ctx_arg crypto algo context
+ * \param out_arg output bytestream
+ * \param in_arg input bytestream
+ * \param iv_arg initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param mode operation mode such as ebc, cbc, ctr
+ *
+*/
+static void deu_aes(void *ctx_arg,
+ u8 *out_arg,
+ const u8 *in_arg,
+ u8 *iv_arg,
+ size_t nbytes,
+ int encdec,
+ int mode)
+#else
+
+/** \fn void deu_aes_core(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, size_t nbytes, int encdec, int mode)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief main interface to AES hardware
+ * \param ctx_arg crypto algo context
+ * \param out_arg output bytestream
+ * \param in_arg input bytestream
+ * \param iv_arg initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param mode operation mode such as ebc, cbc, ctr
+ *
+*/
+static void deu_aes_core(void *ctx_arg,
+ u8 *out_arg,
+ const u8 *in_arg,
+ u8 *iv_arg,
+ size_t nbytes,
+ int encdec,
+ int mode)
+#endif
+
+{
+ /*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+ volatile struct deu_aes *aes = (volatile struct deu_aes *)AES_START;
+ struct aes_ctx *ctx = (struct aes_ctx *)ctx_arg;
+ u32 *in_key = ctx->buf;
+ ulong flag;
+ /*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */
+ int key_len = ctx->key_length;
+
+#ifndef CONFIG_CRYPTO_DEV_DMA
+ int i = 0;
+ int byte_cnt = nbytes;
+#else
+ volatile struct deu_dma *dma = (struct deu_dma *)LQ_DEU_DMA_CON;
+ struct dma_device_info *dma_device = lq_deu[0].dma_device;
+ /* struct deu_drv_priv *deu_priv =
+ * (struct deu_drv_priv *)dma_device->priv; */
+ int wlen = 0;
+ u32 *outcopy = NULL;
+ u32 *dword_mem_aligned_in = NULL;
+
+# ifdef CONFIG_CRYPTO_DEV_POLL_DMA
+ u32 timeout = 0;
+ u32 *out_dma = NULL;
+# endif
+#endif
+
+ DPRINTF(0, "ctx @%p, mode %d, encdec %d\n", ctx, mode, encdec);
+
+ CRTCL_SECT_START;
+
+ /* 128, 192 or 256 bit key length */
+ aes->ctrl.K = key_len / 8 - 2;
+ if (key_len == 128 / 8) {
+ aes->K3R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 0));
+ aes->K2R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 1));
+ aes->K1R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 2));
+ aes->K0R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 3));
+ }
+ else if (key_len == 192 / 8) {
+ aes->K5R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 0));
+ aes->K4R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 1));
+ aes->K3R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 2));
+ aes->K2R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 3));
+ aes->K1R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 4));
+ aes->K0R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 5));
+ }
+ else if (key_len == 256 / 8) {
+ aes->K7R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 0));
+ aes->K6R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 1));
+ aes->K5R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 2));
+ aes->K4R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 3));
+ aes->K3R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 4));
+ aes->K2R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 5));
+ aes->K1R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 6));
+ aes->K0R = DEU_ENDIAN_SWAP(*((u32 *)in_key + 7));
+ }
+ else {
+ CRTCL_SECT_END;
+ return; /* -EINVAL; */
+ }
+
+ /* let HW pre-process DEcryption key in any case (even if
+ ENcryption is used). Key Valid (KV) bit is then only
+ checked in decryption routine! */
+ aes->ctrl.PNK = 1;
+
+#ifdef CONFIG_CRYPTO_DEV_DMA
+ while (aes->ctrl.BUS) {
+ /* this will not take long */
+ }
+ AES_DMA_MISC_CONFIG();
+#endif
+
+ aes->ctrl.E_D = !encdec; /* encryption */
+ aes->ctrl.O = mode; /* 0 ECB 1 CBC 2 OFB 3 CFB 4 CTR */
+ aes->ctrl.SM = 1; /* start after writing input register */
+ aes->ctrl.DAU = 0; /* Disable Automatic Update of init
+ vector */
+ aes->ctrl.ARS = 1; /* Autostart Select - write to IHR */
+
+ /* aes->ctrl.F = 128; */ /* default; only for CFB and OFB modes;
+ change only for
+ customer-specific apps */
+ if (mode > 0) {
+ aes->IV3R = DEU_ENDIAN_SWAP(*(u32 *)iv_arg);
+ aes->IV2R = DEU_ENDIAN_SWAP(*((u32 *)iv_arg + 1));
+ aes->IV1R = DEU_ENDIAN_SWAP(*((u32 *)iv_arg + 2));
+ aes->IV0R = DEU_ENDIAN_SWAP(*((u32 *)iv_arg + 3));
+ };
+
+#ifndef CONFIG_CRYPTO_DEV_DMA
+ i = 0;
+ while (byte_cnt >= 16) {
+ aes->ID3R = INPUT_ENDIAN_SWAP(*((u32 *)in_arg + (i * 4) + 0));
+ aes->ID2R = INPUT_ENDIAN_SWAP(*((u32 *)in_arg + (i * 4) + 1));
+ aes->ID1R = INPUT_ENDIAN_SWAP(*((u32 *)in_arg + (i * 4) + 2));
+ /* start crypto */
+ aes->ID0R = INPUT_ENDIAN_SWAP(*((u32 *)in_arg + (i * 4) + 3));
+
+ while (aes->ctrl.BUS) {
+ /* this will not take long */
+ }
+
+ *((volatile u32 *)out_arg + (i * 4) + 0) = aes->OD3R;
+ *((volatile u32 *)out_arg + (i * 4) + 1) = aes->OD2R;
+ *((volatile u32 *)out_arg + (i * 4) + 2) = aes->OD1R;
+ *((volatile u32 *)out_arg + (i * 4) + 3) = aes->OD0R;
+
+ i++;
+ byte_cnt -= 16;
+ }
+#else /* dma */
+ /* Prepare Rx buf length used in dma psuedo interrupt */
+ /* deu_priv->deu_rx_buf = out_arg; */
+ /* deu_priv->deu_rx_len = nbytes; */
+
+ /* memory alignment issue */
+ dword_mem_aligned_in = (u32 *)DEU_DWORD_REORDERING(in_arg,
+ aes_buff_in,
+ BUFFER_IN, nbytes);
+
+ dma->ctrl.ALGO = 1; /* AES */
+ dma->ctrl.BS = 0;
+ aes->ctrl.DAU = 0;
+ dma->ctrl.EN = 1;
+
+ while (aes->ctrl.BUS) {
+ /* wait for AES to be ready */
+ };
+
+ wlen = dma_device_write(dma_device, (u8 *)dword_mem_aligned_in,
+ nbytes, NULL);
+ if (wlen != nbytes) {
+ dma->ctrl.EN = 0;
+ CRTCL_SECT_END;
+ printk(KERN_ERR "[%s %s %d]: dma_device_write fail!\n",
+ __FILE__, __func__, __LINE__);
+ return; /* -EINVAL; */
+ }
+
+ WAIT_AES_DMA_READY();
+
+# ifdef CONFIG_CRYPTO_DEV_POLL_DMA
+ outcopy = (u32 *)DEU_DWORD_REORDERING(out_arg, aes_buff_out,
+ BUFFER_OUT, nbytes);
+
+ /* polling DMA rx channel */
+ while ((dma_device_read(dma_device, (u8 **)&out_dma, NULL)) == 0) {
+ timeout++;
+
+ if (timeout >= 333000) {
+ dma->ctrl.EN = 0;
+ CRTCL_SECT_END;
+ printk (KERN_ERR "[%s %s %d]: timeout!!\n",
+ __FILE__, __func__, __LINE__);
+ return; /* -EINVAL; */
+ }
+ }
+
+ WAIT_AES_DMA_READY();
+
+ AES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes);
+
+# else /* not working at the moment.. */
+ CRTCL_SECT_END;
+
+ /* sleep and wait for Rx finished */
+ DEU_WAIT_EVENT(deu_priv->deu_thread_wait, DEU_EVENT,
+ deu_priv->deu_event_flags);
+
+ CRTCL_SECT_START;
+# endif
+
+#endif /* dma */
+
+ /* tc.chen : copy iv_arg back */
+ if (mode > 0) {
+ *((u32 *)iv_arg) = DEU_ENDIAN_SWAP(*((u32 *)iv_arg));
+ *((u32 *)iv_arg + 1) = DEU_ENDIAN_SWAP(*((u32 *)iv_arg + 1));
+ *((u32 *)iv_arg + 2) = DEU_ENDIAN_SWAP(*((u32 *)iv_arg + 2));
+ *((u32 *)iv_arg + 3) = DEU_ENDIAN_SWAP(*((u32 *)iv_arg + 3));
+ }
+
+ CRTCL_SECT_END;
+}
+
+/** \fn int ctr_rfc3686_aes_set_key(struct crypto_tfm *tfm, const uint8_t *in_key, unsigned int key_len)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief sets RFC3686 key
+ * \param tfm linux crypto algo transform
+ * \param in_key input key
+ * \param key_len key lengths of 20, 28 and 36 bytes supported; last 4 bytes is nonce
+ * \return 0 - SUCCESS
+ * -EINVAL - bad key length
+*/
+static int ctr_rfc3686_aes_set_key(struct crypto_tfm *tfm,
+ const uint8_t *in_key,
+ unsigned int key_len)
+{
+ struct aes_ctx *ctx = crypto_tfm_ctx(tfm);
+ u32 *flags = &tfm->crt_flags;
+
+ memcpy(ctx->nonce, in_key + (key_len - CTR_RFC3686_NONCE_SIZE),
+ CTR_RFC3686_NONCE_SIZE);
+
+ key_len -= CTR_RFC3686_NONCE_SIZE; /* remove 4 bytes of nonce */
+
+ if (key_len != 16 && key_len != 24 && key_len != 32) {
+ *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+ return -EINVAL;
+ }
+
+ ctx->key_length = key_len;
+
+ memcpy((u8 *)(ctx->buf), in_key, key_len);
+
+ return 0;
+}
+
+/** \fn void deu_aes(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, u32 nbytes, int encdec, int mode)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief main interface with DEU hardware in DMA mode
+ * \param ctx_arg crypto algo context
+ * \param out_arg output bytestream
+ * \param in_arg input bytestream
+ * \param iv_arg initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param mode operation mode such as ebc, cbc, ctr
+*/
+
+#ifdef CONFIG_CRYPTO_DEV_DMA
+static void deu_aes(void *ctx_arg,
+ u8 *out_arg,
+ const u8 *in_arg,
+ u8 *iv_arg,
+ u32 nbytes,
+ int encdec,
+ int mode)
+{
+ u32 remain = nbytes;
+ u32 inc;
+
+ while (remain > 0) {
+ if (remain >= DEU_MAX_PACKET_SIZE)
+ inc = DEU_MAX_PACKET_SIZE;
+ else
+ inc = remain;
+
+ remain -= inc;
+
+ deu_aes_core(ctx_arg, out_arg, in_arg, iv_arg, inc, encdec,
+ mode);
+
+ out_arg += inc;
+ in_arg += inc;
+ }
+}
+#endif
+
+/* definitions from linux/include/crypto.h:
+#define CRYPTO_TFM_MODE_ECB 0x00000001
+#define CRYPTO_TFM_MODE_CBC 0x00000002
+#define CRYPTO_TFM_MODE_CFB 0x00000004
+#define CRYPTO_TFM_MODE_CTR 0x00000008
+#define CRYPTO_TFM_MODE_OFB 0x00000010
+but hardware definition: 0 ECB 1 CBC 2 OFB 3 CFB 4 CTR */
+
+/** \fn void deu_aes_ecb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief sets AES hardware to ECB mode
+ * \param ctx crypto algo context
+ * \param dst output bytestream
+ * \param src input bytestream
+ * \param iv initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param inplace not used
+*/
+static void deu_aes_ecb(void *ctx,
+ uint8_t *dst,
+ const uint8_t *src,
+ uint8_t *iv,
+ size_t nbytes,
+ int encdec,
+ int inplace)
+{
+ deu_aes(ctx, dst, src, NULL, nbytes, encdec, 0);
+}
+
+/** \fn void deu_aes_cbc(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief sets AES hardware to CBC mode
+ * \param ctx crypto algo context
+ * \param dst output bytestream
+ * \param src input bytestream
+ * \param iv initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param inplace not used
+*/
+static void deu_aes_cbc(void *ctx,
+ uint8_t *dst,
+ const uint8_t *src,
+ uint8_t *iv,
+ size_t nbytes,
+ int encdec,
+ int inplace)
+{
+ deu_aes(ctx, dst, src, iv, nbytes, encdec, 1);
+}
+
+#if 0
+/** \fn void deu_aes_ofb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief sets AES hardware to OFB mode
+ * \param ctx crypto algo context
+ * \param dst output bytestream
+ * \param src input bytestream
+ * \param iv initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param inplace not used
+*/
+static void deu_aes_ofb(void *ctx,
+ uint8_t *dst,
+ const uint8_t *src,
+ uint8_t *iv,
+ size_t nbytes,
+ int encdec,
+ int inplace)
+{
+ deu_aes(ctx, dst, src, iv, nbytes, encdec, 2);
+}
+
+/** \fn void deu_aes_cfb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief sets AES hardware to CFB mode
+ * \param ctx crypto algo context
+ * \param dst output bytestream
+ * \param src input bytestream
+ * \param iv initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param inplace not used
+*/
+static void deu_aes_cfb(void *ctx,
+ uint8_t *dst,
+ const uint8_t *src,
+ uint8_t *iv,
+ size_t nbytes,
+ int encdec,
+ int inplace)
+{
+ deu_aes(ctx, dst, src, iv, nbytes, encdec, 3);
+}
+#endif
+
+/** \fn void deu_aes_ctr(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief sets AES hardware to CTR mode
+ * \param ctx crypto algo context
+ * \param dst output bytestream
+ * \param src input bytestream
+ * \param iv initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param inplace not used
+*/
+static void deu_aes_ctr(void *ctx,
+ uint8_t *dst,
+ const uint8_t *src,
+ uint8_t *iv,
+ size_t nbytes,
+ int encdec,
+ int inplace)
+{
+ deu_aes(ctx, dst, src, iv, nbytes, encdec, 4);
+}
+
+/** \fn void aes_encrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief encrypt AES_BLOCK_SIZE of data
+ * \param tfm linux crypto algo transform
+ * \param out output bytestream
+ * \param in input bytestream
+*/
+static void aes_encrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
+{
+ struct aes_ctx *ctx = crypto_tfm_ctx(tfm);
+ deu_aes(ctx, out, in, NULL, AES_BLOCK_SIZE, CRYPTO_DIR_ENCRYPT, 0);
+}
+
+/** \fn void aes_decrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief decrypt AES_BLOCK_SIZE of data
+ * \param tfm linux crypto algo transform
+ * \param out output bytestream
+ * \param in input bytestream
+*/
+static void aes_decrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
+{
+ struct aes_ctx *ctx = crypto_tfm_ctx(tfm);
+ deu_aes(ctx, out, in, NULL, AES_BLOCK_SIZE, CRYPTO_DIR_DECRYPT, 0);
+}
+
+/*
+ * \brief AES function mappings
+*/
+static struct crypto_alg aes_alg = {
+ .cra_name = "aes",
+ .cra_driver_name = "lq_deu-aes",
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct aes_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(aes_alg.cra_list),
+ .cra_u = {
+ .cipher = {
+ .cia_min_keysize = AES_MIN_KEY_SIZE,
+ .cia_max_keysize = AES_MAX_KEY_SIZE,
+ .cia_setkey = aes_set_key,
+ .cia_encrypt = aes_encrypt,
+ .cia_decrypt = aes_decrypt,
+ }
+ }
+};
+
+/** \fn int ecb_aes_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief ECB AES encrypt using linux crypto blkcipher
+ * \param desc blkcipher descriptor
+ * \param dst output scatterlist
+ * \param src input scatterlist
+ * \param nbytes data size in bytes
+ * \return err
+*/
+static int ecb_aes_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ nbytes -= (nbytes % AES_BLOCK_SIZE);
+ deu_aes_ecb(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ NULL, nbytes, CRYPTO_DIR_ENCRYPT, 0);
+ nbytes &= AES_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/** \fn int ecb_aes_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief ECB AES decrypt using linux crypto blkcipher
+ * \param desc blkcipher descriptor
+ * \param dst output scatterlist
+ * \param src input scatterlist
+ * \param nbytes data size in bytes
+ * \return err
+*/
+static int ecb_aes_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ nbytes -= (nbytes % AES_BLOCK_SIZE);
+ deu_aes_ecb(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ NULL, nbytes, CRYPTO_DIR_DECRYPT, 0);
+ nbytes &= AES_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/*
+ * \brief AES function mappings
+*/
+static struct crypto_alg ecb_aes_alg = {
+ .cra_name = "ecb(aes)",
+ .cra_driver_name = "lq_deu-ecb(aes)",
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct aes_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ecb_aes_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .setkey = aes_set_key,
+ .encrypt = ecb_aes_encrypt,
+ .decrypt = ecb_aes_decrypt,
+ }
+ }
+};
+
+/** \fn int cbc_aes_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief CBC AES encrypt using linux crypto blkcipher
+ * \param desc blkcipher descriptor
+ * \param dst output scatterlist
+ * \param src input scatterlist
+ * \param nbytes data size in bytes
+ * \return err
+*/
+static int cbc_aes_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ u8 *iv = walk.iv;
+ nbytes -= (nbytes % AES_BLOCK_SIZE);
+ deu_aes_cbc(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ iv, nbytes, CRYPTO_DIR_ENCRYPT, 0);
+ nbytes &= AES_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/** \fn int cbc_aes_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief CBC AES decrypt using linux crypto blkcipher
+ * \param desc blkcipher descriptor
+ * \param dst output scatterlist
+ * \param src input scatterlist
+ * \param nbytes data size in bytes
+ * \return err
+*/
+static int cbc_aes_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ u8 *iv = walk.iv;
+ nbytes -= (nbytes % AES_BLOCK_SIZE);
+ deu_aes_cbc(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ iv, nbytes, CRYPTO_DIR_DECRYPT, 0);
+ nbytes &= AES_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/*
+ * \brief AES function mappings
+*/
+static struct crypto_alg cbc_aes_alg = {
+ .cra_name = "cbc(aes)",
+ .cra_driver_name = "lq_deu-cbc(aes)",
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct aes_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(cbc_aes_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = aes_set_key,
+ .encrypt = cbc_aes_encrypt,
+ .decrypt = cbc_aes_decrypt,
+ }
+ }
+};
+
+/** \fn int ctr_basic_aes_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief Counter mode AES encrypt using linux crypto blkcipher
+ * \param desc blkcipher descriptor
+ * \param dst output scatterlist
+ * \param src input scatterlist
+ * \param nbytes data size in bytes
+ * \return err
+*/
+static int ctr_basic_aes_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ u8 *iv = walk.iv;
+ nbytes -= (nbytes % AES_BLOCK_SIZE);
+ deu_aes_ctr(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ iv, nbytes, CRYPTO_DIR_ENCRYPT, 0);
+ nbytes &= AES_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/** \fn int ctr_basic_aes_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief Counter mode AES decrypt using linux crypto blkcipher
+ * \param desc blkcipher descriptor
+ * \param dst output scatterlist
+ * \param src input scatterlist
+ * \param nbytes data size in bytes
+ * \return err
+*/
+static int ctr_basic_aes_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ u8 *iv = walk.iv;
+ nbytes -= (nbytes % AES_BLOCK_SIZE);
+ deu_aes_ctr(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ iv, nbytes, CRYPTO_DIR_DECRYPT, 0);
+ nbytes &= AES_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/*
+ * \brief AES function mappings
+*/
+static struct crypto_alg ctr_basic_aes_alg = {
+ .cra_name = "ctr(aes)",
+ .cra_driver_name = "lq_deu-ctr(aes)",
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct aes_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ctr_basic_aes_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = aes_set_key,
+ .encrypt = ctr_basic_aes_encrypt,
+ .decrypt = ctr_basic_aes_decrypt,
+ }
+ }
+};
+
+/** \fn int ctr_rfc3686_aes_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief Counter mode AES (rfc3686) encrypt using linux crypto blkcipher
+ * \param desc blkcipher descriptor
+ * \param dst output scatterlist
+ * \param src input scatterlist
+ * \param nbytes data size in bytes
+ * \return err
+*/
+static int ctr_rfc3686_aes_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+ u8 rfc3686_iv[16];
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ /* set up counter block */
+ memcpy(rfc3686_iv, ctx->nonce, CTR_RFC3686_NONCE_SIZE);
+ memcpy(rfc3686_iv + CTR_RFC3686_NONCE_SIZE, walk.iv,
+ CTR_RFC3686_IV_SIZE);
+
+ /* initialize counter portion of counter block */
+ *(__be32 *)(rfc3686_iv + CTR_RFC3686_NONCE_SIZE + CTR_RFC3686_IV_SIZE) =
+ cpu_to_be32(1);
+
+ while ((nbytes = walk.nbytes)) {
+ nbytes -= (nbytes % AES_BLOCK_SIZE);
+ deu_aes_ctr(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ rfc3686_iv, nbytes, CRYPTO_DIR_ENCRYPT, 0);
+ nbytes &= AES_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/** \fn int ctr_rfc3686_aes_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief Counter mode AES (rfc3686) decrypt using linux crypto blkcipher
+ * \param desc blkcipher descriptor
+ * \param dst output scatterlist
+ * \param src input scatterlist
+ * \param nbytes data size in bytes
+ * \return err
+*/
+static int ctr_rfc3686_aes_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+ u8 rfc3686_iv[16];
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ /* set up counter block */
+ memcpy(rfc3686_iv, ctx->nonce, CTR_RFC3686_NONCE_SIZE);
+ memcpy(rfc3686_iv + CTR_RFC3686_NONCE_SIZE, walk.iv,
+ CTR_RFC3686_IV_SIZE);
+
+ /* initialize counter portion of counter block */
+ *(__be32 *)(rfc3686_iv + CTR_RFC3686_NONCE_SIZE + CTR_RFC3686_IV_SIZE) =
+ cpu_to_be32(1);
+
+ while ((nbytes = walk.nbytes)) {
+ nbytes -= (nbytes % AES_BLOCK_SIZE);
+ deu_aes_ctr(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ rfc3686_iv, nbytes, CRYPTO_DIR_DECRYPT, 0);
+ nbytes &= AES_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/*
+ * \brief AES function mappings
+*/
+static struct crypto_alg ctr_rfc3686_aes_alg = {
+ .cra_name = "rfc3686(ctr(aes))",
+ .cra_driver_name = "lq_deu-ctr-rfc3686(aes)",
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct aes_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ctr_rfc3686_aes_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = CTR_RFC3686_MAX_KEY_SIZE,
+ .ivsize = CTR_RFC3686_IV_SIZE,
+ .setkey = ctr_rfc3686_aes_set_key,
+ .encrypt = ctr_rfc3686_aes_encrypt,
+ .decrypt = ctr_rfc3686_aes_decrypt,
+ }
+ }
+};
+
+/** \fn int lq_deu_init_aes (void)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief function to initialize AES driver
+ * \return ret
+*/
+int lq_deu_init_aes(void)
+{
+ int ret;
+
+ if ((ret = crypto_register_alg(&aes_alg)))
+ goto aes_err;
+
+ if ((ret = crypto_register_alg(&ecb_aes_alg)))
+ goto ecb_aes_err;
+
+ if ((ret = crypto_register_alg(&cbc_aes_alg)))
+ goto cbc_aes_err;
+
+ if ((ret = crypto_register_alg(&ctr_basic_aes_alg)))
+ goto ctr_basic_aes_err;
+
+ if ((ret = crypto_register_alg(&ctr_rfc3686_aes_alg)))
+ goto ctr_rfc3686_aes_err;
+
+ deu_aes_chip_init();
+
+ CRTCL_SECT_INIT;
+
+#ifdef CONFIG_CRYPTO_DEV_DMA
+ if (ALLOCATE_MEMORY(BUFFER_IN, AES_ALGO) < 0) {
+ printk(KERN_ERR "[%s %s %d]: malloc memory fail!\n",
+ __FILE__, __func__, __LINE__);
+ goto ctr_rfc3686_aes_err;
+ }
+ if (ALLOCATE_MEMORY(BUFFER_OUT, AES_ALGO) < 0) {
+ printk(KERN_ERR "[%s %s %d]: malloc memory fail!\n",
+ __FILE__, __func__, __LINE__);
+ goto ctr_rfc3686_aes_err;
+ }
+#endif
+
+ printk(KERN_NOTICE "Lantiq DEU AES initialized%s.\n",
+ disable_deudma ? "" : " (DMA)");
+ return ret;
+
+ctr_rfc3686_aes_err:
+ crypto_unregister_alg(&ctr_rfc3686_aes_alg);
+ printk(KERN_ERR "Lantiq ctr_rfc3686_aes initialization failed!\n");
+ return ret;
+ctr_basic_aes_err:
+ crypto_unregister_alg(&ctr_basic_aes_alg);
+ printk(KERN_ERR "Lantiq ctr_basic_aes initialization failed!\n");
+ return ret;
+cbc_aes_err:
+ crypto_unregister_alg(&cbc_aes_alg);
+ printk(KERN_ERR "Lantiq cbc_aes initialization failed!\n");
+ return ret;
+ecb_aes_err:
+ crypto_unregister_alg(&ecb_aes_alg);
+ printk(KERN_ERR "Lantiq aes initialization failed!\n");
+ return ret;
+aes_err:
+ printk(KERN_ERR "Lantiq DEU AES initialization failed!\n");
+ return ret;
+}
+
+/** \fn void lq_deu_fini_aes(void)
+ * \ingroup LQ_AES_FUNCTIONS
+ * \brief unregister aes driver
+*/
+void lq_deu_fini_aes(void)
+{
+ crypto_unregister_alg(&aes_alg);
+ crypto_unregister_alg(&ecb_aes_alg);
+ crypto_unregister_alg(&cbc_aes_alg);
+ crypto_unregister_alg(&ctr_basic_aes_alg);
+ crypto_unregister_alg(&ctr_rfc3686_aes_alg);
+
+#ifdef CONFIG_CRYPTO_DEV_DMA
+ FREE_MEMORY(aes_buff_in);
+ FREE_MEMORY(aes_buff_out);
+#endif
+}
--- /dev/null
+++ b/drivers/crypto/lantiq/arc4.c
@@ -0,0 +1,397 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief Lantiq DEU driver module
+*/
+
+/**
+ \file arc4.c
+ \ingroup LQ_DEU
+ \brief ARC4 encryption DEU driver file
+*/
+
+/**
+ \defgroup LQ_ARC4_FUNCTIONS LQ_ARC4_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief Lantiq DEU driver functions
+*/
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/crypto.h>
+#include <crypto/algapi.h>
+#include <linux/interrupt.h>
+#include <asm/byteorder.h>
+#include <linux/delay.h>
+
+#ifdef CONFIG_SOL_LANTIQ_XWAY
+
+#include "deu.h"
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+
+static spinlock_t cipher_lock;
+
+/* Preprocessor declerations */
+#define ARC4_MIN_KEY_SIZE 1
+/* #define ARC4_MAX_KEY_SIZE 256 */
+#define ARC4_MAX_KEY_SIZE 16
+#define ARC4_BLOCK_SIZE 1
+
+/*
+ * \brief arc4 private structure
+*/
+struct arc4_ctx {
+ int key_length;
+ u8 buf[120];
+};
+
+/** \fn static void deu_arc4(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, u32 nbytes, int encdec, int mode)
+ \ingroup LQ_ARC4_FUNCTIONS
+ \brief main interface to AES hardware
+ \param ctx_arg crypto algo context
+ \param out_arg output bytestream
+ \param in_arg input bytestream
+ \param iv_arg initialization vector
+ \param nbytes length of bytestream
+ \param encdec 1 for encrypt; 0 for decrypt
+ \param mode operation mode such as ebc, cbc, ctr
+*/
+static void deu_arc4(void *ctx_arg,
+ u8 *out_arg,
+ const u8 *in_arg,
+ u8 *iv_arg,
+ u32 nbytes,
+ int encdec,
+ int mode)
+{
+ volatile struct deu_arc4 *arc4 = (struct deu_arc4 *) ARC4_START;
+ int i = 0;
+ ulong flag;
+
+#if 1 /* need to handle nbytes not multiple of 16 */
+ volatile u32 tmp_array32[4];
+ volatile u8 *tmp_ptr8;
+ int remaining_bytes, j;
+#endif
+
+ CRTCL_SECT_START;
+
+ arc4->IDLEN = nbytes;
+
+#if 1
+ while (i < nbytes) {
+ arc4->ID3R = *((u32 *) in_arg + (i>>2) + 0);
+ arc4->ID2R = *((u32 *) in_arg + (i>>2) + 1);
+ arc4->ID1R = *((u32 *) in_arg + (i>>2) + 2);
+ arc4->ID0R = *((u32 *) in_arg + (i>>2) + 3);
+
+ arc4->ctrl.GO = 1;
+
+ while (arc4->ctrl.BUS) {
+ /* this will not take long */ }
+
+#if 1
+ /* need to handle nbytes not multiple of 16 */
+ tmp_array32[0] = arc4->OD3R;
+ tmp_array32[1] = arc4->OD2R;
+ tmp_array32[2] = arc4->OD1R;
+ tmp_array32[3] = arc4->OD0R;
+
+ remaining_bytes = nbytes - i;
+ if (remaining_bytes > 16)
+ remaining_bytes = 16;
+
+ tmp_ptr8 = (u8 *)&tmp_array32[0];
+ for (j = 0; j < remaining_bytes; j++)
+ *out_arg++ = *tmp_ptr8++;
+#else
+ *((u32 *) out_arg + (i>>2) + 0) = arc4->OD3R;
+ *((u32 *) out_arg + (i>>2) + 1) = arc4->OD2R;
+ *((u32 *) out_arg + (i>>2) + 2) = arc4->OD1R;
+ *((u32 *) out_arg + (i>>2) + 3) = arc4->OD0R;
+#endif
+
+ i += 16;
+ }
+#else /* dma */
+
+#endif /* dma */
+
+ CRTCL_SECT_END;
+}
+
+/** \fn arc4_chip_init(void)
+ \ingroup LQ_ARC4_FUNCTIONS
+ \brief initialize arc4 hardware
+*/
+static void arc4_chip_init(void)
+{
+ /* do nothing */
+}
+
+/** \fn static int arc4_set_key(struct crypto_tfm *tfm, const u8 *in_key, unsigned int key_len)
+ \ingroup LQ_ARC4_FUNCTIONS
+ \brief sets ARC4 key
+ \param tfm linux crypto algo transform
+ \param in_key input key
+ \param key_len key lengths less than or equal to 16 bytes supported
+*/
+static int arc4_set_key(struct crypto_tfm *tfm,
+ const u8 *inkey,
+ unsigned int key_len)
+{
+ /* struct arc4_ctx *ctx = crypto_tfm_ctx(tfm); */
+ volatile struct deu_arc4 *arc4 = (struct deu_arc4 *) ARC4_START;
+
+ u32 *in_key = (u32 *)inkey;
+
+ /* must program all bits at one go?!!! */
+#if 1
+ /* #ifndef CONFIG_CRYPTO_DEV_VR9_DMA */
+ *LQ_ARC4_CON = ( (1<<31) | ((key_len - 1)<<27) | (1<<26) | (3<<16) );
+ /* NDC=1,ENDI=1,GO=0,KSAE=1,SM=0 */
+
+ arc4->K3R = *((u32 *) in_key + 0);
+ arc4->K2R = *((u32 *) in_key + 1);
+ arc4->K1R = *((u32 *) in_key + 2);
+ arc4->K0R = *((u32 *) in_key + 3);
+#else /* dma */
+ *AMAZONS_ARC4_CON = ( (1<<31) | ((key_len - 1)<<27) | (1<<26) | (3<<16) | (1<<4) );
+ /* NDC=1,ENDI=1,GO=0,KSAE=1,SM=1 */
+
+ arc4->K3R = *((u32 *) in_key + 0);
+ arc4->K2R = *((u32 *) in_key + 1);
+ arc4->K1R = *((u32 *) in_key + 2);
+ arc4->K0R = *((u32 *) in_key + 3);
+
+#if 0
+ arc4->K3R = deu_endian_swap(*((u32 *) in_key + 0));
+ arc4->K2R = deu_endian_swap(*((u32 *) in_key + 1));
+ arc4->K1R = deu_endian_swap(*((u32 *) in_key + 2));
+ arc4->K0R = deu_endian_swap(*((u32 *) in_key + 3));
+#endif
+
+#endif
+
+#if 0 /* arc4 is a ugly state machine, KSAE can only be set once per session */
+ ctx->key_length = key_len;
+
+ memcpy((u8 *)(ctx->buf), in_key, key_len);
+#endif
+
+ return 0;
+}
+
+/** \fn static void deu_arc4_ecb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
+ \ingroup LQ_ARC4_FUNCTIONS
+ \brief sets ARC4 hardware to ECB mode
+ \param ctx crypto algo context
+ \param dst output bytestream
+ \param src input bytestream
+ \param iv initialization vector
+ \param nbytes length of bytestream
+ \param encdec 1 for encrypt; 0 for decrypt
+ \param inplace not used
+*/
+static void deu_arc4_ecb(void *ctx,
+ uint8_t *dst,
+ const uint8_t *src,
+ uint8_t *iv,
+ size_t nbytes,
+ int encdec,
+ int inplace)
+{
+ deu_arc4(ctx, dst, src, NULL, nbytes, encdec, 0);
+}
+
+/** \fn static void arc4_crypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+ \ingroup LQ_ARC4_FUNCTIONS
+ \brief encrypt/decrypt ARC4_BLOCK_SIZE of data
+ \param tfm linux crypto algo transform
+ \param out output bytestream
+ \param in input bytestream
+*/
+static void arc4_crypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
+{
+ struct arc4_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ deu_arc4(ctx, out, in, NULL, ARC4_BLOCK_SIZE,
+ CRYPTO_DIR_DECRYPT, CRYPTO_TFM_MODE_ECB);
+}
+
+/*
+ * \brief ARC4 function mappings
+*/
+static struct crypto_alg arc4_alg = {
+ .cra_name = "arc4",
+ .cra_driver_name = "lq_deu-arc4",
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = ARC4_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct arc4_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(arc4_alg.cra_list),
+ .cra_u = {
+ .cipher = {
+ .cia_min_keysize = ARC4_MIN_KEY_SIZE,
+ .cia_max_keysize = ARC4_MAX_KEY_SIZE,
+ .cia_setkey = arc4_set_key,
+ .cia_encrypt = arc4_crypt,
+ .cia_decrypt = arc4_crypt,
+ }
+ }
+};
+
+/** \fn static int ecb_arc4_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ \ingroup LQ_ARC4_FUNCTIONS
+ \brief ECB ARC4 encrypt using linux crypto blkcipher
+ \param desc blkcipher descriptor
+ \param dst output scatterlist
+ \param src input scatterlist
+ \param nbytes data size in bytes
+*/
+static int ecb_arc4_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct arc4_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+
+ DPRINTF(1, "\n");
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ deu_arc4_ecb(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ NULL, nbytes, CRYPTO_DIR_ENCRYPT, 0);
+ nbytes &= ARC4_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/** \fn static int ecb_arc4_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ \ingroup LQ_ARC4_FUNCTIONS
+ \brief ECB ARC4 decrypt using linux crypto blkcipher
+ \param desc blkcipher descriptor
+ \param dst output scatterlist
+ \param src input scatterlist
+ \param nbytes data size in bytes
+*/
+static int ecb_arc4_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct arc4_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+
+ DPRINTF(1, "\n");
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ deu_arc4_ecb(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ NULL, nbytes, CRYPTO_DIR_DECRYPT, 0);
+ nbytes &= ARC4_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/*
+ * \brief ARC4 function mappings
+*/
+static struct crypto_alg ecb_arc4_alg = {
+ .cra_name = "ecb(arc4)",
+ .cra_driver_name = "lq_deu-ecb(arc4)",
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = ARC4_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct arc4_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ecb_arc4_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = ARC4_MIN_KEY_SIZE,
+ .max_keysize = ARC4_MAX_KEY_SIZE,
+ .setkey = arc4_set_key,
+ .encrypt = ecb_arc4_encrypt,
+ .decrypt = ecb_arc4_decrypt,
+ }
+ }
+};
+
+/** \fn int lq_deu_init_arc4(void)
+ \ingroup LQ_ARC4_FUNCTIONS
+ \brief initialize arc4 driver
+*/
+int lq_deu_init_arc4(void)
+{
+ int ret;
+
+ if ((ret = crypto_register_alg(&arc4_alg)))
+ goto arc4_err;
+
+ if ((ret = crypto_register_alg(&ecb_arc4_alg)))
+ goto ecb_arc4_err;
+
+ arc4_chip_init();
+
+ CRTCL_SECT_INIT;
+
+ printk(KERN_NOTICE "Lantiq DEU ARC4 initialized %s.\n",
+ disable_deudma ? "" : " (DMA)");
+ return ret;
+
+arc4_err:
+ crypto_unregister_alg(&arc4_alg);
+ printk(KERN_ERR "Lantiq arc4 initialization failed!\n");
+ return ret;
+ecb_arc4_err:
+ crypto_unregister_alg(&ecb_arc4_alg);
+ printk(KERN_ERR "Lantiq ecb_arc4 initialization failed!\n");
+
+ return ret;
+}
+
+/** \fn void lq_deu_fini_arc4(void)
+ \ingroup LQ_ARC4_FUNCTIONS
+ \brief unregister arc4 driver
+*/
+void lq_deu_fini_arc4(void)
+{
+ crypto_unregister_alg(&arc4_alg);
+ crypto_unregister_alg(&ecb_arc4_alg);
+}
+
+#endif
+
+#endif
--- /dev/null
+++ b/drivers/crypto/lantiq/des.c
@@ -0,0 +1,929 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief Lantiq DEU driver
+*/
+
+/**
+ \file des.c
+ \ingroup LQ_DEU
+ \brief DES encryption DEU driver file
+*/
+
+/**
+ \defgroup LQ_DES_FUNCTIONS LQ_DES_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief Lantiq DES Encryption functions
+*/
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/crypto.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/byteorder.h>
+#include <crypto/algapi.h>
+
+#ifdef CONFIG_SOL_LANTIQ_XWAY
+
+#include "deu.h"
+
+#ifdef CONFIG_CRYPTO_DEV_DMA
+# include "deu_dma.h"
+#endif
+
+static spinlock_t cipher_lock;
+
+/* Preprocessor declarations */
+#define DES_KEY_SIZE 8
+#define DES_EXPKEY_WORDS 32
+#define DES_BLOCK_SIZE 8
+#define DES3_EDE_KEY_SIZE (3 * DES_KEY_SIZE)
+#define DES3_EDE_EXPKEY_WORDS (3 * DES_EXPKEY_WORDS)
+#define DES3_EDE_BLOCK_SIZE DES_BLOCK_SIZE
+
+struct des_ctx {
+ int controlr_M;
+ int key_length;
+ u8 iv[DES_BLOCK_SIZE];
+ u32 expkey[DES3_EDE_EXPKEY_WORDS];
+};
+
+/** \fn int des_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int key_len)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief sets DES key
+ * \param tfm linux crypto algo transform
+ * \param key input key
+ * \param key_len key length
+*/
+static int des_setkey(struct crypto_tfm *tfm,
+ const u8 *key,
+ unsigned int key_len)
+{
+ struct des_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ DPRINTF(0, "ctx @%p, key_len %d %d\n", ctx, key_len);
+
+ ctx->controlr_M = 0; /* des */
+ ctx->key_length = key_len;
+
+ memcpy((u8 *)(ctx->expkey), key, key_len);
+
+ return 0;
+}
+
+#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+/** \fn void deu_des(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, u32 nbytes, int encdec, int mode)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief main interface to DES hardware
+ * \param ctx_arg crypto algo context
+ * \param out_arg output bytestream
+ * \param in_arg input bytestream
+ * \param iv_arg initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param mode operation mode such as ebc, cbc
+*/
+
+static void deu_des(void *ctx_arg,
+ u8 *out_arg,
+ const u8 *in_arg,
+ u8 *iv_arg,
+ u32 nbytes,
+ int encdec,
+ int mode)
+#else
+/** \fn void deu_des_core(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, u32 nbytes, int encdec, int mode)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief main interface to DES hardware
+ * \param ctx_arg crypto algo context
+ * \param out_arg output bytestream
+ * \param in_arg input bytestream
+ * \param iv_arg initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param mode operation mode such as ebc, cbc
+*/
+static void deu_des_core(void *ctx_arg,
+ u8 *out_arg,
+ const u8 *in_arg,
+ u8 *iv_arg,
+ u32 nbytes,
+ int encdec,
+ int mode)
+#endif
+{
+ volatile struct deu_des *des = (struct deu_des *) DES_3DES_START;
+ struct des_ctx *dctx = ctx_arg;
+ u32 *key = dctx->expkey;
+ ulong flag;
+
+#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ int i = 0;
+ int nblocks = 0;
+#else
+ volatile struct deu_dma *dma = (struct deu_dma *) LQ_DEU_DMA_CON;
+ struct dma_device_info *dma_device = lq_deu[0].dma_device;
+ /* struct deu_drv_priv *deu_priv =
+ * (struct deu_drv_priv *)dma_device->priv; */
+ int wlen = 0;
+ u32 *outcopy = NULL;
+ u32 *dword_mem_aligned_in = NULL;
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_POLL_DMA
+ u32 timeout = 0;
+ u32 *out_dma = NULL;
+#endif
+
+#endif
+
+ DPRINTF(0, "ctx @%p, mode %d, encdec %d\n", dctx, mode, encdec);
+
+ CRTCL_SECT_START;
+
+ des->ctrl.E_D = !encdec; /* encryption */
+ des->ctrl.O = mode; /* 0 ECB, 1 CBC, 2 OFB, 3 CFB, 4 CTR */
+ des->ctrl.SM = 1; /* start after writing input register */
+ des->ctrl.DAU = 0; /* Disable Automatic Update of init vect */
+ des->ctrl.ARS = 1; /* Autostart Select - write to IHR */
+
+ des->ctrl.M = dctx->controlr_M;
+ /* write keys */
+ if (dctx->controlr_M == 0) {
+ /* DES mode */
+ des->K1HR = DEU_ENDIAN_SWAP(*((u32 *) key + 0));
+ des->K1LR = DEU_ENDIAN_SWAP(*((u32 *) key + 1));
+#ifdef CRYPTO_DEBUG
+ printk("key1: %x\n", (*((u32 *) key + 0)));
+ printk("key2: %x\n", (*((u32 *) key + 1)));
+#endif
+ } else {
+ /* 3DES mode (EDE-x) */
+ switch (dctx->key_length) {
+ case 24:
+ des->K3HR = DEU_ENDIAN_SWAP(*((u32 *) key + 4));
+ des->K3LR = DEU_ENDIAN_SWAP(*((u32 *) key + 5));
+ /* no break; */
+ case 16:
+ des->K2HR = DEU_ENDIAN_SWAP(*((u32 *) key + 2));
+ des->K2LR = DEU_ENDIAN_SWAP(*((u32 *) key + 3));
+ /* no break; */
+ case 8:
+ des->K1HR = DEU_ENDIAN_SWAP(*((u32 *) key + 0));
+ des->K1LR = DEU_ENDIAN_SWAP(*((u32 *) key + 1));
+ break;
+ default:
+ CRTCL_SECT_END;
+ return;
+ }
+ }
+
+ /* write init vector (not required for ECB mode) */
+ if (mode > 0) {
+ des->IVHR = DEU_ENDIAN_SWAP(*(u32 *) iv_arg);
+ des->IVLR = DEU_ENDIAN_SWAP(*((u32 *) iv_arg + 1));
+ }
+
+#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ nblocks = nbytes / 4;
+
+ for (i = 0; i < nblocks; i += 2) {
+ /* wait for busy bit to clear */
+
+ /*--- Workaround ---------------------------------------------
+ do a dummy read to the busy flag because it is not raised
+ early enough in CFB/OFB 3DES modes */
+#ifdef CRYPTO_DEBUG
+ printk("ihr: %x\n", (*((u32 *) in_arg + i)));
+ printk("ilr: %x\n", (*((u32 *) in_arg + 1 + i)));
+#endif
+ des->IHR = INPUT_ENDIAN_SWAP(*((u32 *) in_arg + i));
+ /* start crypto */
+ des->ILR = INPUT_ENDIAN_SWAP(*((u32 *) in_arg + 1 + i));
+
+ while (des->ctrl.BUS) {
+ /* this will not take long */
+ }
+
+ *((u32 *) out_arg + 0 + i) = des->OHR;
+ *((u32 *) out_arg + 1 + i) = des->OLR;
+
+#ifdef CRYPTO_DEBUG
+ printk("ohr: %x\n", (*((u32 *) out_arg + i)));
+ printk("olr: %x\n", (*((u32 *) out_arg + 1 + i)));
+#endif
+ }
+
+#else /* dma mode */
+
+ /* Prepare Rx buf length used in dma psuedo interrupt */
+ /* deu_priv->deu_rx_buf = out_arg; */
+ /* deu_priv->deu_rx_len = nbytes; */
+
+ /* memory alignment issue */
+ dword_mem_aligned_in = (u32 *) DEU_DWORD_REORDERING(in_arg, des_buff_in,
+ BUFFER_IN, nbytes);
+
+ dma->ctrl.ALGO = 0; /* DES */
+ des->ctrl.DAU = 0;
+ dma->ctrl.BS = 0;
+ dma->ctrl.EN = 1;
+
+ while (des->ctrl.BUS) {
+ /* wait for AES to be ready */
+ };
+
+ wlen = dma_device_write(dma_device, (u8 *) dword_mem_aligned_in, nbytes,
+ NULL);
+ if (wlen != nbytes) {
+ dma->ctrl.EN = 0;
+ CRTCL_SECT_END;
+ printk(KERN_ERR "[%s %s %d]: dma_device_write fail!\n",
+ __FILE__, __func__, __LINE__);
+ return; /* -EINVAL; */
+ }
+
+ WAIT_DES_DMA_READY();
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_POLL_DMA
+ outcopy = (u32 *) DEU_DWORD_REORDERING(out_arg, des_buff_out,
+ BUFFER_OUT, nbytes);
+
+ /* polling DMA rx channel */
+ while ((dma_device_read(dma_device, (u8 **) &out_dma, NULL)) == 0) {
+ timeout++;
+
+ if (timeout >= 333000) {
+ dma->ctrl.EN = 0;
+ CRTCL_SECT_END;
+ printk(KERN_ERR "[%s %s %d]: timeout!!\n",
+ __FILE__, __func__, __LINE__);
+ return; /* -EINVAL; */
+ }
+ }
+
+ WAIT_DES_DMA_READY();
+
+ DES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes);
+#else
+ CRTCL_SECT_END; /* Sleep and wait for Rx finished */
+ DEU_WAIT_EVENT(deu_priv->deu_thread_wait, DEU_EVENT,
+ deu_priv->deu_event_flags);
+ CRTCL_SECT_START;
+#endif
+
+#endif /* dma mode */
+
+ if (mode > 0) {
+ *(u32 *) iv_arg = DEU_ENDIAN_SWAP(des->IVHR);
+ *((u32 *) iv_arg + 1) = DEU_ENDIAN_SWAP(des->IVLR);
+ };
+
+ CRTCL_SECT_END;
+}
+
+/* definitions from linux/include/crypto.h:
+#define CRYPTO_TFM_MODE_ECB 0x00000001
+#define CRYPTO_TFM_MODE_CBC 0x00000002
+#define CRYPTO_TFM_MODE_CFB 0x00000004
+#define CRYPTO_TFM_MODE_CTR 0x00000008
+#define CRYPTO_TFM_MODE_OFB 0x00000010
+but hardware definition: 0 ECB 1 CBC 2 OFB 3 CFB 4 CTR */
+
+/** \fn void deu_des(void *ctx_arg, u8 *out_arg, const u8 *in_arg, u8 *iv_arg, u32 nbytes, int encdec, int mode)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief main interface to DES hardware
+ * \param ctx_arg crypto algo context
+ * \param out_arg output bytestream
+ * \param in_arg input bytestream
+ * \param iv_arg initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param mode operation mode such as ebc, cbc
+*/
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+static void deu_des(void *ctx_arg,
+ u8 *out_arg,
+ const u8 *in_arg,
+ u8 *iv_arg,
+ u32 nbytes,
+ int encdec,
+ int mode)
+{
+ u32 remain = nbytes;
+ u32 inc;
+
+ DPRINTF(0, "\n");
+
+ while (remain > 0) {
+ if (remain >= DEU_MAX_PACKET_SIZE)
+ inc = DEU_MAX_PACKET_SIZE;
+ else
+ inc = remain;
+
+ remain -= inc;
+
+ deu_des_core(ctx_arg, out_arg, in_arg, iv_arg, inc, encdec,
+ mode);
+
+ out_arg += inc;
+ in_arg += inc;
+ }
+}
+#endif
+
+/** \fn void deu_des_ecb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief sets DES hardware to ECB mode
+ * \param ctx crypto algo context
+ * \param dst output bytestream
+ * \param src input bytestream
+ * \param iv initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param inplace not used
+*/
+
+static void deu_des_ecb(void *ctx,
+ uint8_t *dst,
+ const uint8_t *src,
+ uint8_t *iv,
+ size_t nbytes,
+ int encdec,
+ int inplace)
+{
+ DPRINTF(0, "ctx @%p\n", ctx);
+ deu_des(ctx, dst, src, NULL, nbytes, encdec, 0);
+}
+
+/** \fn void deu_des_cbc(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief sets DES hardware to CBC mode
+ * \param ctx crypto algo context
+ * \param dst output bytestream
+ * \param src input bytestream
+ * \param iv initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param inplace not used
+*/
+static void deu_des_cbc(void *ctx,
+ uint8_t *dst,
+ const uint8_t *src,
+ uint8_t *iv,
+ size_t nbytes,
+ int encdec,
+ int inplace)
+{
+ DPRINTF(0, "ctx @%p\n", ctx);
+ deu_des(ctx, dst, src, iv, nbytes, encdec, 1);
+}
+
+#if 0
+/** \fn void deu_des_ofb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief sets DES hardware to OFB mode
+ * \param ctx crypto algo context
+ * \param dst output bytestream
+ * \param src input bytestream
+ * \param iv initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param inplace not used
+*/
+static void deu_des_ofb(void *ctx,
+ uint8_t *dst,
+ const uint8_t *src,
+ uint8_t *iv,
+ size_t nbytes,
+ int encdec,
+ int inplace)
+{
+ DPRINTF(0, "ctx @%p\n", ctx);
+ deu_des(ctx, dst, src, iv, nbytes, encdec, 2);
+}
+
+/** \fn void deu_des_cfb(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
+ \ingroup LQ_DES_FUNCTIONS
+ \brief sets DES hardware to CFB mode
+ \param ctx crypto algo context
+ \param dst output bytestream
+ \param src input bytestream
+ \param iv initialization vector
+ \param nbytes length of bytestream
+ \param encdec 1 for encrypt; 0 for decrypt
+ \param inplace not used
+*/
+static void deu_des_cfb(void *ctx,
+ uint8_t *dst,
+ const uint8_t *src,
+ uint8_t *iv,
+ size_t nbytes,
+ int encdec,
+ int inplace)
+{
+ DPRINTF(0, "ctx @%p\n", ctx);
+ deu_des(ctx, dst, src, iv, nbytes, encdec, 3);
+}
+
+/** \fn void deu_des_ctr(void *ctx, uint8_t *dst, const uint8_t *src, uint8_t *iv, size_t nbytes, int encdec, int inplace)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief sets DES hardware to CTR mode
+ * \param ctx crypto algo context
+ * \param dst output bytestream
+ * \param src input bytestream
+ * \param iv initialization vector
+ * \param nbytes length of bytestream
+ * \param encdec 1 for encrypt; 0 for decrypt
+ * \param inplace not used
+*/
+static void deu_des_ctr(void *ctx,
+ uint8_t *dst,
+ const uint8_t *src,
+ uint8_t *iv,
+ size_t nbytes,
+ int encdec,
+ int inplace)
+{
+ DPRINTF(0, "ctx @%p\n", ctx);
+ deu_des(ctx, dst, src, iv, nbytes, encdec, 4);
+}
+#endif
+
+/** \fn void des_encrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief encrypt DES_BLOCK_SIZE of data
+ * \param tfm linux crypto algo transform
+ * \param out output bytestream
+ * \param in input bytestream
+*/
+static void des_encrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
+{
+ struct des_ctx *ctx = crypto_tfm_ctx(tfm);
+ DPRINTF(0, "ctx @%p\n", ctx);
+ deu_des(ctx, out, in, NULL, DES_BLOCK_SIZE, CRYPTO_DIR_ENCRYPT, 0);
+}
+
+/** \fn void des_decrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief encrypt DES_BLOCK_SIZE of data
+ * \param tfm linux crypto algo transform
+ * \param out output bytestream
+ * \param in input bytestream
+*/
+static void des_decrypt(struct crypto_tfm *tfm, uint8_t *out, const uint8_t *in)
+{
+ struct des_ctx *ctx = crypto_tfm_ctx(tfm);
+ DPRINTF(0, "ctx @%p\n", ctx);
+ deu_des(ctx, out, in, NULL, DES_BLOCK_SIZE, CRYPTO_DIR_DECRYPT, 0);
+}
+
+/*
+ * \brief RFC2451:
+ *
+ * For DES-EDE3, there is no known need to reject weak or
+ * complementation keys. Any weakness is obviated by the use of
+ * multiple keys.
+ *
+ * However, if the first two or last two independent 64-bit keys are
+ * equal (k1 == k2 or k2 == k3), then the DES3 operation is simply the
+ * same as DES. Implementers MUST reject keys that exhibit this
+ * property.
+ *
+ */
+
+/** \fn int des3_ede_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief sets 3DES key
+ * \param tfm linux crypto algo transform
+ * \param key input key
+ * \param keylen key length
+*/
+static int des3_ede_setkey(struct crypto_tfm *tfm,
+ const u8 *key,
+ unsigned int key_len)
+{
+ struct des_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ DPRINTF(0, "ctx @%p, key_len %d\n", ctx, key_len);
+
+ ctx->controlr_M = key_len / 8 + 1; /* 3DES EDE1 / EDE2 / EDE3 Mode */
+ ctx->key_length = key_len;
+
+ memcpy((u8 *)(ctx->expkey), key, key_len);
+
+ return 0;
+}
+
+/*
+ * \brief DES function mappings
+*/
+static struct crypto_alg des_alg = {
+ .cra_name = "des",
+ .cra_driver_name = "lq_deu-des",
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct des_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_alignmask = 3,
+ .cra_list = LIST_HEAD_INIT(des_alg.cra_list),
+ .cra_u = {
+ .cipher = {
+ .cia_min_keysize = DES_KEY_SIZE,
+ .cia_max_keysize = DES_KEY_SIZE,
+ .cia_setkey = des_setkey,
+ .cia_encrypt = des_encrypt,
+ .cia_decrypt = des_decrypt
+ }
+ }
+};
+
+/*
+ * \brief DES function mappings
+*/
+static struct crypto_alg des3_ede_alg = {
+ .cra_name = "des3_ede",
+ .cra_driver_name = "lq_deu-des3_ede",
+ .cra_flags = CRYPTO_ALG_TYPE_CIPHER,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct des_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_alignmask = 3,
+ .cra_list = LIST_HEAD_INIT(des3_ede_alg.cra_list),
+ .cra_u = {
+ .cipher = {
+ .cia_min_keysize = DES_KEY_SIZE,
+ .cia_max_keysize = DES_KEY_SIZE,
+ .cia_setkey = des3_ede_setkey,
+ .cia_encrypt = des_encrypt,
+ .cia_decrypt = des_decrypt
+ }
+ }
+};
+
+/** \fn int ecb_des_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief ECB DES encrypt using linux crypto blkcipher
+ * \param desc blkcipher descriptor
+ * \param dst output scatterlist
+ * \param src input scatterlist
+ * \param nbytes data size in bytes
+*/
+static int ecb_des_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+
+ DPRINTF(0, "ctx @%p\n", ctx);
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ nbytes -= (nbytes % DES_BLOCK_SIZE);
+ deu_des_ecb(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ NULL, nbytes, CRYPTO_DIR_ENCRYPT, 0);
+ nbytes &= DES_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/** \fn int ecb_des_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief ECB DES decrypt using linux crypto blkcipher
+ * \param desc blkcipher descriptor
+ * \param dst output scatterlist
+ * \param src input scatterlist
+ * \param nbytes data size in bytes
+ * \return err
+*/
+static int ecb_des_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+
+ DPRINTF(0, "ctx @%p\n", ctx);
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ nbytes -= (nbytes % DES_BLOCK_SIZE);
+ deu_des_ecb(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ NULL, nbytes, CRYPTO_DIR_DECRYPT, 0);
+ nbytes &= DES_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/*
+ * \brief DES function mappings
+*/
+static struct crypto_alg ecb_des_alg = {
+ .cra_name = "ecb(des)",
+ .cra_driver_name = "lq_deu-ecb(des)",
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct des_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ecb_des_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = DES_KEY_SIZE,
+ .max_keysize = DES_KEY_SIZE,
+ .setkey = des_setkey,
+ .encrypt = ecb_des_encrypt,
+ .decrypt = ecb_des_decrypt,
+ }
+ }
+};
+
+/*
+ * \brief DES function mappings
+*/
+static struct crypto_alg ecb_des3_ede_alg = {
+ .cra_name = "ecb(des3_ede)",
+ .cra_driver_name = "lq_deu-ecb(des3_ede)",
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = DES3_EDE_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct des_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(ecb_des3_ede_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = DES3_EDE_KEY_SIZE,
+ .max_keysize = DES3_EDE_KEY_SIZE,
+ .setkey = des3_ede_setkey,
+ .encrypt = ecb_des_encrypt,
+ .decrypt = ecb_des_decrypt,
+ }
+ }
+};
+
+/** \fn int cbc_des_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief CBC DES encrypt using linux crypto blkcipher
+ * \param desc blkcipher descriptor
+ * \param dst output scatterlist
+ * \param src input scatterlist
+ * \param nbytes data size in bytes
+ * \return err
+*/
+static int cbc_des_encrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+
+ DPRINTF(0, "ctx @%p\n", ctx);
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ u8 *iv = walk.iv;
+ /* printk("iv = %08x\n", *(u32 *)iv); */
+ nbytes -= (nbytes % DES_BLOCK_SIZE);
+ deu_des_cbc(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ iv, nbytes, CRYPTO_DIR_ENCRYPT, 0);
+ nbytes &= DES_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/** \fn int cbc_des_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst, struct scatterlist *src, unsigned int nbytes)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief CBC DES decrypt using linux crypto blkcipher
+ * \param desc blkcipher descriptor
+ * \param dst output scatterlist
+ * \param src input scatterlist
+ * \param nbytes data size in bytes
+ * \return err
+*/
+static int cbc_des_decrypt(struct blkcipher_desc *desc,
+ struct scatterlist *dst,
+ struct scatterlist *src,
+ unsigned int nbytes)
+{
+ struct des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
+ struct blkcipher_walk walk;
+ int err;
+
+ DPRINTF(0, "ctx @%p\n", ctx);
+
+ blkcipher_walk_init(&walk, dst, src, nbytes);
+ err = blkcipher_walk_virt(desc, &walk);
+
+ while ((nbytes = walk.nbytes)) {
+ u8 *iv = walk.iv;
+ /* printk("iv = %08x\n", *(u32 *)iv); */
+ nbytes -= (nbytes % DES_BLOCK_SIZE);
+ deu_des_cbc(ctx, walk.dst.virt.addr, walk.src.virt.addr,
+ iv, nbytes, CRYPTO_DIR_DECRYPT, 0);
+ nbytes &= DES_BLOCK_SIZE - 1;
+ err = blkcipher_walk_done(desc, &walk, nbytes);
+ }
+
+ return err;
+}
+
+/*
+ * \brief DES function mappings
+*/
+static struct crypto_alg cbc_des_alg = {
+ .cra_name = "cbc(des)",
+ .cra_driver_name = "lq_deu-cbc(des)",
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct des_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(cbc_des_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = DES_KEY_SIZE,
+ .max_keysize = DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = des_setkey,
+ .encrypt = cbc_des_encrypt,
+ .decrypt = cbc_des_decrypt,
+ }
+ }
+};
+
+/*
+ * \brief DES function mappings
+*/
+static struct crypto_alg cbc_des3_ede_alg = {
+ .cra_name = "cbc(des3_ede)",
+ .cra_driver_name = "lq_deu-cbc(des3_ede)",
+ .cra_flags = CRYPTO_ALG_TYPE_BLKCIPHER,
+ .cra_blocksize = DES3_EDE_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct des_ctx),
+ .cra_type = &crypto_blkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_list = LIST_HEAD_INIT(cbc_des3_ede_alg.cra_list),
+ .cra_u = {
+ .blkcipher = {
+ .min_keysize = DES3_EDE_KEY_SIZE,
+ .max_keysize = DES3_EDE_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = des3_ede_setkey,
+ .encrypt = cbc_des_encrypt,
+ .decrypt = cbc_des_decrypt,
+ }
+ }
+};
+
+/** \fn int lq_deu_init_des(void)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief initialize des driver
+*/
+int lq_deu_init_des(void)
+{
+ int ret = 0;
+
+ ret = crypto_register_alg(&des_alg);
+ if (ret < 0)
+ goto des_err;
+
+ ret = crypto_register_alg(&ecb_des_alg);
+ if (ret < 0)
+ goto ecb_des_err;
+
+ ret = crypto_register_alg(&cbc_des_alg);
+ if (ret < 0)
+ goto cbc_des_err;
+
+ ret = crypto_register_alg(&des3_ede_alg);
+ if (ret < 0)
+ goto des3_ede_err;
+
+ ret = crypto_register_alg(&ecb_des3_ede_alg);
+ if (ret < 0)
+ goto ecb_des3_ede_err;
+
+ ret = crypto_register_alg(&cbc_des3_ede_alg);
+ if (ret < 0)
+ goto cbc_des3_ede_err;
+
+ deu_des_chip_init();
+
+ CRTCL_SECT_INIT;
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ if (ALLOCATE_MEMORY(BUFFER_IN, DES_ALGO) < 0) {
+ printk(KERN_ERR "[%s %s %d]: malloc memory fail!\n",
+ __FILE__, __func__, __LINE__);
+ goto cbc_des3_ede_err;
+ }
+ if (ALLOCATE_MEMORY(BUFFER_OUT, DES_ALGO) < 0) {
+ printk(KERN_ERR "[%s %s %d]: malloc memory fail!\n",
+ __FILE__, __func__, __LINE__);
+ goto cbc_des3_ede_err;
+ }
+#endif
+
+ printk(KERN_NOTICE "Lantiq DEU DES initialized%s.\n",
+ disable_deudma ? "" : " (DMA)");
+ return ret;
+
+des_err:
+ crypto_unregister_alg(&des_alg);
+ printk(KERN_ERR "Lantiq des initialization failed!\n");
+
+ return ret;
+
+ecb_des_err:
+ crypto_unregister_alg(&ecb_des_alg);
+ printk(KERN_ERR "Lantiq ecb_des initialization failed!\n");
+
+ return ret;
+
+cbc_des_err:
+ crypto_unregister_alg(&cbc_des_alg);
+ printk(KERN_ERR "Lantiq cbc_des initialization failed!\n");
+
+ return ret;
+
+des3_ede_err:
+ crypto_unregister_alg(&des3_ede_alg);
+ printk(KERN_ERR "Lantiq des3_ede initialization failed!\n");
+
+ return ret;
+
+ecb_des3_ede_err:
+ crypto_unregister_alg(&ecb_des3_ede_alg);
+ printk(KERN_ERR "Lantiq ecb_des3_ede initialization failed!\n");
+
+ return ret;
+
+cbc_des3_ede_err:
+ crypto_unregister_alg(&cbc_des3_ede_alg);
+ printk(KERN_ERR "Lantiq cbc_des3_ede initialization failed!\n");
+
+ return ret;
+}
+
+/** \fn void lq_deu_fini_des(void)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief unregister des driver
+*/
+void lq_deu_fini_des(void)
+{
+ crypto_unregister_alg(&des_alg);
+ crypto_unregister_alg(&ecb_des_alg);
+ crypto_unregister_alg(&cbc_des_alg);
+ crypto_unregister_alg(&des3_ede_alg);
+ crypto_unregister_alg(&ecb_des3_ede_alg);
+ crypto_unregister_alg(&cbc_des3_ede_alg);
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ FREE_MEMORY(des_buff_in);
+ FREE_MEMORY(des_buff_out);
+#endif /* CONFIG_CRYPTO_DEV_LANTIQ_DMA_DANUBE */
+}
+
+#endif
--- /dev/null
+++ b/drivers/crypto/lantiq/deu.c
@@ -0,0 +1,195 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief Lantiq DEU driver module
+*/
+
+/**
+ \file deu.c
+ \ingroup LQ_DEU
+ \brief main DEU driver file
+*/
+
+/**
+ \defgroup LQ_DEU_FUNCTIONS LQ_DEU_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief Lantiq DEU functions
+*/
+
+#include <linux/version.h>
+#if defined(CONFIG_MODVERSIONS)
+#define MODVERSIONS
+#include <linux/modversions.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/crypto.h>
+#include <linux/proc_fs.h>
+#include <linux/fs.h> /* Stuff about file systems that we need */
+#include <asm/byteorder.h>
+
+#if 0
+#ifdef CONFIG_SOC_LANTIQ_XWAY
+# include <lq_pmu.h>
+#endif
+#endif
+
+#include "deu.h"
+
+struct lq_crypto_priv lq_crypto_ops;
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+int disable_deudma = 0;
+#else
+int disable_deudma = 1;
+#endif /* CONFIG_CRYPTO_DEV_LANTIQ_DMA */
+
+#ifdef CRYPTO_DEBUG
+char deu_debug_level = 3;
+#endif
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_MODULE
+# define STATIC static
+#else
+# define STATIC
+#endif
+
+/** \fn static int lq_deu_init(void)
+ * \ingroup LQ_DEU_FUNCTIONS
+ * \brief link all modules that have been selected in kernel config for Lantiq HW crypto support
+ * \return ret
+*/
+int lq_deu_init(void)
+{
+ int ret = -ENOSYS;
+ u32 config;
+
+ printk(KERN_INFO "Lantiq crypto hardware driver version %s\n",
+ LQ_DEU_DRV_VERSION);
+
+ config = deu_chip_init();
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ deu_dma_init();
+#endif
+
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_AES)
+ if(config & LQ_DEU_ID_AES) {
+ if ((ret = lq_deu_init_aes())) {
+ printk(KERN_ERR "Lantiq AES initialization failed!\n");
+ }
+ } else {
+ printk(KERN_ERR "Lantiq AES not supported!\n");
+ }
+#endif
+
+#ifdef CONFIG_SOL_LANTIQ_XWAY
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_DES)
+ if(config & LQ_DEU_ID_DES) {
+ if ((ret = lq_deu_init_des())) {
+ printk(KERN_ERR "Lantiq DES initialization failed!\n");
+ }
+ } else {
+ printk(KERN_ERR "Lantiq DES not supported!\n");
+ }
+#endif
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_ARC4) && defined(CONFIG_CRYPTO_DEV_LANTIQ_DMA)
+ if ((ret = lq_deu_init_arc4())) {
+ printk(KERN_ERR "Lantiq ARC4 initialization failed!\n");
+ }
+#endif
+#endif
+
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_SHA1)
+ if(config & LQ_DEU_ID_HASH) {
+ if ((ret = lq_deu_init_sha1())) {
+ printk(KERN_ERR "Lantiq SHA1 initialization failed!\n");
+ }
+ } else {
+ printk(KERN_ERR "Lantiq SHA1 not supported!\n");
+ }
+#endif
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_MD5)
+ if(config & LQ_DEU_ID_HASH) {
+ if ((ret = lq_deu_init_md5())) {
+ printk(KERN_ERR "Lantiq MD5 initialization failed!\n");
+ }
+ } else {
+ printk(KERN_ERR "Lantiq MD5 not supported!\n");
+ }
+#endif
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_SHA1_HMAC)
+ if ((ret = lq_deu_init_sha1_hmac())) {
+ printk(KERN_ERR "Lantiq SHA1_HMAC initialization failed!\n");
+ }
+#endif
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_MD5_HMAC)
+ if ((ret = lq_deu_init_md5_hmac())) {
+ printk(KERN_ERR "Lantiq MD5_HMAC initialization failed!\n");
+ }
+#endif
+ return ret;
+}
+
+/** \fn static void lq_deu_fini(void)
+ * \ingroup LQ_DEU_FUNCTIONS
+ * \brief remove the loaded crypto algorithms
+*/
+void lq_deu_exit(void)
+{
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_AES)
+ lq_deu_fini_aes();
+#endif
+#ifdef CONFIG_SOL_LANTIQ_XWAY
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_DES)
+ lq_deu_fini_des();
+#endif
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_ARC4) \
+ && defined(CONFIG_CRYPTO_DEV_LANTIQ_DMA)
+ lq_deu_fini_arc4();
+#endif
+#endif
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_SHA1)
+ lq_deu_fini_sha1();
+#endif
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_MD5)
+ lq_deu_fini_md5();
+#endif
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_SHA1_HMAC)
+ lq_deu_fini_sha1_hmac();
+#endif
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_MD5_HMAC)
+ lq_deu_fini_md5_hmac();
+#endif
+
+ printk("DEU has exited successfully\n");
+
+#if defined(CONFIG_CRYPTO_DEV_LANTIQ_DMA)
+ deu_dma_exit();
+ printk("DMA has deregistered successfully\n");
+#endif
+}
+
+EXPORT_SYMBOL(lq_deu_init);
+EXPORT_SYMBOL(lq_deu_exit);
--- /dev/null
+++ b/drivers/crypto/lantiq/deu.h
@@ -0,0 +1,248 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief Lantiq DEU driver module
+*/
+
+/**
+ \file deu.h
+ \brief Main DEU driver header file
+*/
+
+/**
+ \defgroup LQ_DEU_DEFINITIONS LQ_DEU_DEFINITIONS
+ \ingroup LQ_DEU
+ \brief Lantiq DEU definitions
+*/
+
+
+#ifndef DEU_H
+#define DEU_H
+
+#undef CRYPTO_DEBUG
+
+#define LQ_DEU_DRV_VERSION "1.0.1"
+
+#if defined(CONFIG_LANTIQ_DANUBE)
+# include "deu_danube.h"
+#elif defined(CONFIG_LANTIQ_AR9)
+# include "deu_ar9.h"
+#elif defined(CONFIG_SOC_LANTIQ_FALCON)
+# include "deu_falcon.h"
+#else
+//# error "Unknown platform"
+# include "deu_danube.h"
+#endif
+
+struct lq_crypto_priv {
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ u32 *des_buff_in;
+ u32 *des_buff_out;
+ u32 *aes_buff_in;
+ u32 *aes_buff_out;
+
+ int (*dma_init)(void);
+ void (*dma_exit)(void);
+ u32 (*dma_align)(const u8 *, u32 *, int, int);
+ void (*aes_dma_memcpy)(u32 *, u32 *, u8 *, int);
+ void (*des_dma_memcpy)(u32 *, u32 *, u8 *, int);
+ int (*aes_dma_malloc)(int);
+ int (*des_dma_malloc)(int);
+ void (*dma_free)(u32 *);
+#endif
+
+ u32 (*endian_swap)(u32);
+ u32 (*input_swap)(u32);
+ void (*aes_chip_init)(void);
+ void (*des_chip_init)(void);
+ u32 (*chip_init)(void);
+};
+
+extern struct lq_crypto_priv lq_crypto_ops;
+
+#define LQ_DEU_ALIGNMENT 16
+
+#define PFX "lq_deu: "
+
+#define LQ_DEU_CRA_PRIORITY 300
+#define LQ_DEU_COMPOSITE_PRIORITY 400
+
+#define CRYPTO_DIR_ENCRYPT 1
+#define CRYPTO_DIR_DECRYPT 0
+
+#define CRTCL_SECT_INIT spin_lock_init(&cipher_lock)
+#define CRTCL_SECT_START spin_lock_irqsave(&cipher_lock, flag)
+#define CRTCL_SECT_END spin_unlock_irqrestore(&cipher_lock, flag)
+
+#define LQ_DEU_ID_REV 0x00001F
+#define LQ_DEU_ID_ID 0x00FF00
+#define LQ_DEU_ID_DMA 0x010000
+#define LQ_DEU_ID_HASH 0x020000
+#define LQ_DEU_ID_AES 0x040000
+#define LQ_DEU_ID_3DES 0x080000
+#define LQ_DEU_ID_DES 0x100000
+
+extern int disable_deudma;
+
+int lq_deu_init(void);
+void lq_deu_exit(void);
+
+int lq_deu_init_des(void);
+int lq_deu_init_aes(void);
+int lq_deu_init_arc4(void);
+int lq_deu_init_sha1(void);
+int lq_deu_init_md5(void);
+int lq_deu_init_sha1_hmac(void);
+int lq_deu_init_md5_hmac(void);
+
+void lq_deu_fini_des(void);
+void lq_deu_fini_aes(void);
+void lq_deu_fini_arc4(void);
+void lq_deu_fini_sha1(void);
+void lq_deu_fini_md5(void);
+void lq_deu_fini_sha1_hmac(void);
+void lq_deu_fini_md5_hmac(void);
+
+/* board specific functions */
+/* { */
+static inline u32 deu_chip_init(void)
+{
+ return lq_crypto_ops.chip_init();
+}
+
+static inline void deu_des_chip_init(void)
+{
+ lq_crypto_ops.des_chip_init();
+}
+
+static inline void deu_aes_chip_init(void)
+{
+ lq_crypto_ops.aes_chip_init();
+}
+
+static inline u32 deu_input_swap(u32 input)
+{
+ return lq_crypto_ops.input_swap(input);
+}
+
+static inline u32 deu_endian_swap(u32 input)
+{
+ return lq_crypto_ops.endian_swap(input);
+}
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+static inline int deu_aes_dma_malloc(int value)
+{
+ return lq_crypto_ops.aes_dma_malloc(value);
+}
+
+static inline int deu_des_dma_malloc(int value)
+{
+ return lq_crypto_ops.des_dma_malloc(value);
+}
+
+static inline u32 *deu_dma_align(const u8 *arg,
+ u32 *buff_alloc,
+ int in_out,
+ int nbytes)
+{
+ return lq_crypto_ops.dma_align(arg, buff_alloc, in_out, nbytes);
+}
+
+static inline void deu_aes_dma_memcpy(u32 *outcopy,
+ u32 *out_dma,
+ u8 *out_arg,
+ int nbytes)
+{
+ lq_crypto_ops.aes_dma_memcpy(outcopy, out_dma, out_arg, nbytes);
+}
+
+static inline void deu_des_dma_memcpy(u32 *outcopy,
+ u32 *out_dma,
+ u8 *out_arg,
+ int nbytes)
+{
+ lq_crypto_ops.des_dma_memcpy(outcopy, out_dma, out_arg, nbytes);
+}
+
+static inline void deu_dma_free(u32 *addr)
+{
+ lq_crypto_ops.dma_free(addr);
+}
+
+static inline int deu_dma_init(void)
+{
+ lq_crypto_ops.dma_init();
+}
+
+static inline void deu_dma_exit(void)
+{
+ lq_crypto_ops.dma_exit();
+}
+#endif
+
+/* } */
+
+#define DEU_WAKELIST_INIT(queue) \
+ init_waitqueue_head(&queue)
+
+#define DEU_WAIT_EVENT_TIMEOUT(queue, event, flags, timeout) \
+ do { \
+ wait_event_interruptible_timeout((queue), \
+ test_bit((event), \
+ &(flags)), (timeout)); \
+ clear_bit((event), &(flags)); \
+ }while (0)
+
+
+#define DEU_WAKEUP_EVENT(queue, event, flags) \
+ do { \
+ set_bit((event), &(flags)); \
+ wake_up_interruptible(&(queue)); \
+ }while (0)
+
+#define DEU_WAIT_EVENT(queue, event, flags) \
+ do { \
+ wait_event_interruptible(queue, \
+ test_bit((event), &(flags))); \
+ clear_bit((event), &(flags)); \
+ }while (0)
+
+struct deu_drv_priv {
+ wait_queue_head_t deu_thread_wait;
+#define DEU_EVENT 1
+ volatile long deu_event_flags;
+ u8 *deu_rx_buf;
+ u32 deu_rx_len;
+};
+
+#ifdef CRYPTO_DEBUG
+extern char deu_debug_level;
+# define DPRINTF(level, format, args...) \
+ if (level < deu_debug_level) \
+ printk(KERN_INFO "[%s %s %d]: " format, \
+ __FILE__, __func__, __LINE__, ##args)
+#else
+# define DPRINTF(level, format, args...) do { } while(0)
+#endif
+
+#endif /* DEU_H */
--- /dev/null
+++ b/drivers/crypto/lantiq/deu_ar9.c
@@ -0,0 +1,327 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <asm/io.h> /* dma_cache_inv */
+#include <linux/platform_device.h>
+
+#ifdef CONFIG_SOC_LANTIQ_XWAY
+
+#include "deu.h"
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief Lantiq DEU driver module
+*/
+
+/**
+ \file deu_ar9.c
+ \brief Lantiq DEU board specific driver file for ar9
+*/
+
+/**
+ \defgroup BOARD_SPECIFIC_FUNCTIONS LQ_BOARD_SPECIFIC_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief board specific functions
+*/
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+struct lq_deu_device lq_deu[1];
+
+static u8 *g_dma_page_ptr = NULL;
+static u8 *g_dma_block = NULL;
+static u8 *g_dma_block2 = NULL;
+
+/** \fn int dma_init(void)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief Initialize DMA for DEU usage. DMA specific registers are
+ * intialized here, including a pointer to the device, memory
+ * space for the device and DEU-DMA descriptors
+ * \return -1: fail, 0: SUCCESS
+*/
+static int dma_init(void)
+{
+ volatile struct deu_dma *dma = (struct deu_dma *) LQ_DEU_DMA_CON;
+ struct dma_device_info *dma_device = NULL;
+ int i = 0;
+
+ struct dma_device_info *deu_dma_device_ptr;
+
+ /* get one free page and share between g_dma_block and g_dma_block2 */
+ printk("PAGE_SIZE = %ld\n", PAGE_SIZE);
+ /* need 16-byte alignment memory block */
+ g_dma_page_ptr = (u8 *)__get_free_page(GFP_KERNEL);
+ /* need 16-byte alignment memory block */
+ g_dma_block = g_dma_page_ptr;
+ /* need 16-byte alignment memory block */
+ g_dma_block2 = (u8 *)(g_dma_page_ptr + (PAGE_SIZE >> 1));
+
+ /* deu_dma_priv_init(); */
+
+ deu_dma_device_ptr = dma_device_reserve("DEU");
+ if (!deu_dma_device_ptr) {
+ printk("DEU: reserve DMA fail!\n");
+ return -1;
+ }
+ lq_deu[0].dma_device = deu_dma_device_ptr;
+
+ dma_device = deu_dma_device_ptr;
+ /* dma_device->priv = &deu_dma_priv; */
+ dma_device->buffer_alloc = &deu_dma_buffer_alloc;
+ dma_device->buffer_free = &deu_dma_buffer_free;
+ dma_device->intr_handler = &deu_dma_intr_handler;
+
+ dma_device->tx_endianness_mode = LQ_DMA_ENDIAN_TYPE3;
+ dma_device->rx_endianness_mode = LQ_DMA_ENDIAN_TYPE3;
+ dma_device->port_num = 1;
+ dma_device->tx_burst_len = 2;
+ dma_device->rx_burst_len = 2;
+ dma_device->max_rx_chan_num = 1;
+ dma_device->max_tx_chan_num = 1;
+ dma_device->port_packet_drop_enable = 0;
+
+ for (i = 0; i < dma_device->max_rx_chan_num; i++) {
+ dma_device->rx_chan[i]->packet_size = DEU_MAX_PACKET_SIZE;
+ dma_device->rx_chan[i]->desc_len = 1;
+ dma_device->rx_chan[i]->control = LQ_DMA_CH_ON;
+ dma_device->rx_chan[i]->byte_offset = 0;
+ dma_device->rx_chan[i]->chan_poll_enable = 1;
+ }
+
+ for (i = 0; i < dma_device->max_tx_chan_num; i++) {
+ dma_device->tx_chan[i]->control = LQ_DMA_CH_ON;
+ dma_device->tx_chan[i]->desc_len = 1;
+ dma_device->tx_chan[i]->chan_poll_enable = 1;
+ }
+
+ dma_device->current_tx_chan = 0;
+ dma_device->current_rx_chan = 0;
+
+ i = dma_device_register(dma_device);
+ for (i = 0; i < dma_device->max_rx_chan_num; i++) {
+ (dma_device->rx_chan[i])->open(dma_device->rx_chan[i]);
+ }
+
+ dma->ctrl.BS = 0;
+ dma->ctrl.RXCLS = 0;
+ dma->ctrl.EN = 1;
+
+ return 0;
+}
+
+/** \fn u32 *dma_align(const u8 *arg, u32 *buffer_alloc, int in_buff, int nbytes)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief Not used for AR9
+ * \param arg Pointer to the input / output memory address
+ * \param buffer_alloc A pointer to the buffer
+ * \param in_buff Input (if == 1) or Output (if == 0) buffer
+ * \param nbytes Number of bytes of data
+*/
+static u32 *dma_align(const u8 *arg, u32 *buffer_alloc, int in_buff, int nbytes)
+{
+ return (u32 *) arg;
+}
+
+/** \fn void aes_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief copy the DMA data to the memory address space for AES
+ * \param outcopy Not used
+ * \param out_dma A pointer to the memory address that stores the DMA data
+ * \param out_arg The pointer to the memory address that needs to be copied to]
+ * \param nbytes Number of bytes of data
+*/
+static void aes_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
+{
+ memcpy(out_arg, out_dma, nbytes);
+}
+
+/** \fn void des_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief copy the DMA data to the memory address space for DES
+ * \param outcopy Not used
+ * \param out_dma A pointer to the memory address that stores the DMA data
+ * \param out_arg The pointer to the memory address that needs to be copied to]
+ * \param nbytes Number of bytes of data
+*/
+static void des_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
+{
+ memcpy(out_arg, out_dma, nbytes);
+}
+
+/** \fn dma_exit(void)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief unregister dma devices after exit
+*/
+static void dma_exit(void)
+{
+ if (g_dma_page_ptr)
+ free_page((u32) g_dma_page_ptr);
+ dma_device_release(lq_deu[0].dma_device);
+ dma_device_unregister(lq_deu[0].dma_device);
+}
+#endif /* CONFIG_CRYPTO_DEV_LANTIQ_DMA */
+
+/** \fn u32 endian_swap(u32 input)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief Swap data given to the function
+ * \param input Data input to be swapped
+ * \return either the swapped data or the input data depending on whether it is in DMA mode or FPI mode
+*/
+static u32 endian_swap(u32 input)
+{
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ u8 *ptr = (u8 *)&input;
+ return ((ptr[3] << 24) | (ptr[2] << 16) | (ptr[1] << 8) | ptr[0]);
+#else
+ return input;
+#endif
+}
+
+/** \fn u32 input_swap(u32 input)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief Not used
+ * \return input
+*/
+static u32 input_swap(u32 input)
+{
+ return input;
+}
+
+/** \fn void aes_chip_init(void)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief initialize AES hardware
+*/
+static void aes_chip_init(void)
+{
+ volatile struct deu_aes *aes = (struct deu_aes *) AES_START;
+
+ aes->ctrl.SM = 1;
+#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ aes->ctrl.ARS = 1;
+#else
+ aes->ctrl.NDC = 1; /* to write to ENDI */
+ asm("sync");
+ aes->ctrl.ENDI = 0;
+ asm("sync");
+ aes->ctrl.ARS = 0; /* 0 for dma */
+ asm("sync");
+#endif
+}
+
+/** \fn void des_chip_init(void)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief initialize DES hardware
+*/
+static void des_chip_init(void)
+{
+ volatile struct deu_des *des = (struct deu_des *) DES_3DES_START;
+
+#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ /* start crypto engine with write to ILR */
+ des->ctrl.SM = 1;
+ asm("sync");
+ des->ctrl.ARS = 1;
+#else
+ des->ctrl.SM = 1;
+ des->ctrl.NDC = 1;
+ asm("sync");
+ des->ctrl.ENDI = 0;
+ asm("sync");
+ des->ctrl.ARS = 0; /* 0 for dma */
+
+#endif
+}
+
+static u32 chip_init(void)
+{
+ volatile struct deu_clk_ctrl *clc = (struct deu_clk_ctrl *) LQ_DEU_CLK;
+
+#if 0
+ lq_pmu_enable(1<<20);
+#endif
+
+ clc->FSOE = 0;
+ clc->SBWE = 0;
+ clc->SPEN = 0;
+ clc->SBWE = 0;
+ clc->DISS = 0;
+ clc->DISR = 0;
+
+ return *LQ_DEU_ID;
+}
+
+static int lq_crypto_probe(struct platform_device *pdev)
+{
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ lq_crypto_ops.dma_init = dma_init;
+ lq_crypto_ops.dma_exit = dma_exit;
+ lq_crypto_ops.aes_dma_memcpy = aes_dma_memcpy;
+ lq_crypto_ops.des_dma_memcpy = des_dma_memcpy;
+ lq_crypto_ops.aes_dma_malloc = aes_dma_malloc;
+ lq_crypto_ops.des_dma_malloc = des_dma_malloc;
+ lq_crypto_ops.dma_align = dma_align;
+ lq_crypto_ops.dma_free = dma_free;
+#endif
+
+ lq_crypto_ops.endian_swap = endian_swap;
+ lq_crypto_ops.input_swap = input_swap;
+ lq_crypto_ops.aes_chip_init = aes_chip_init;
+ lq_crypto_ops.des_chip_init = des_chip_init;
+ lq_crypto_ops.chip_init = chip_init;
+
+ printk("lq_ar9_deu: driver loaded!\n");
+
+ lq_deu_init();
+
+ return 0;
+}
+
+static int lq_crypto_remove(struct platform_device *pdev)
+{
+ lq_deu_exit();
+
+ return 0;
+}
+
+static struct platform_driver lq_crypto = {
+ .probe = lq_crypto_probe,
+ .remove = lq_crypto_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "lq_ar9_deu"
+ }
+};
+
+static int __init lq_crypto_init(void)
+{
+ return platform_driver_register(&lq_crypto);
+}
+module_init(lq_crypto_init);
+
+static void __exit lq_crypto_exit(void)
+{
+ platform_driver_unregister(&lq_crypto);
+}
+module_exit(lq_crypto_exit);
+
+#endif
--- /dev/null
+++ b/drivers/crypto/lantiq/deu_ar9.h
@@ -0,0 +1,291 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus / Infineon Technologies
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief DEU driver module
+*/
+
+/**
+ \defgroup LQ_DEU_DEFINITIONS LQ_DEU_DEFINITIONS
+ \ingroup LQ_DEU
+ \brief Lantiq DEU definitions
+*/
+
+/**
+ \file deu_ar9.h
+ \brief DEU driver header file
+*/
+
+
+#ifndef DEU_AR9_H
+#define DEU_AR9_H
+
+#define LQ_DEU_BASE_ADDR (KSEG1 | 0x1E103100)
+#define LQ_DEU_CLK ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0000))
+#define LQ_DEU_ID ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0008))
+#define LQ_DES_CON ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0010))
+#define LQ_AES_CON ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0050))
+#define LQ_HASH_CON ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x00B0))
+#define LQ_ARC4_CON ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0100))
+
+#define ARC4_START LQ_ARC4_CON
+#define DES_3DES_START LQ_DES_CON
+#define HASH_START LQ_HASH_CON
+#define AES_START LQ_AES_CON
+
+#ifdef CONFIG_CRYPTO_DEV_DMA
+# include "deu_dma.h"
+# define DEU_DWORD_REORDERING(ptr, buffer, in_out, bytes) \
+ deu_dma_align(ptr, buffer, in_out, bytes)
+# define AES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes) \
+ deu_aes_dma_memcpy(outcopy, out_dma, out_arg, nbytes)
+# define DES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes) \
+ deu_des_dma_memcpy(outcopy, out_dma, out_arg, nbytes)
+# define BUFFER_IN 1
+# define BUFFER_OUT 0
+# define AES_ALGO 1
+# define DES_ALGO 0
+# define ALLOCATE_MEMORY(val, type) 1
+# define FREE_MEMORY(buff)
+extern struct lq_deu_device lq_deu[1];
+#endif /* CONFIG_CRYPTO_DEV_DMA */
+
+/* SHA CONSTANTS */
+#define HASH_CON_VALUE 0x0700002C
+
+#define INPUT_ENDIAN_SWAP(input) deu_input_swap(input)
+#define DEU_ENDIAN_SWAP(input) deu_endian_swap(input)
+#define DELAY_PERIOD 10
+#define FIND_DEU_CHIP_VERSION chip_version()
+
+#define WAIT_AES_DMA_READY() \
+ do { \
+ int i; \
+ volatile struct deu_dma *dma = \
+ (struct deu_dma *) LQ_DEU_DMA_CON; \
+ volatile struct deu_aes *aes = \
+ (volatile struct deu_aes *) AES_START; \
+ for (i = 0; i < 10; i++) \
+ udelay(DELAY_PERIOD); \
+ while (dma->ctrl.BSY) {}; \
+ while (aes->ctrl.BUS) {}; \
+ } while (0)
+
+#define WAIT_DES_DMA_READY() \
+ do { \
+ int i; \
+ volatile struct deu_dma *dma = \
+ (struct deu_dma *) LQ_DEU_DMA_CON; \
+ volatile struct deu_des *des = \
+ (struct deu_des *) DES_3DES_START; \
+ for (i = 0; i < 10; i++) \
+ udelay(DELAY_PERIOD); \
+ while (dma->ctrl.BSY) {}; \
+ while (des->ctrl.BUS) {}; \
+ } while (0)
+
+#define AES_DMA_MISC_CONFIG() \
+ do { \
+ volatile struct deu_aes *aes = \
+ (volatile struct deu_aes *) AES_START; \
+ aes->ctrl.KRE = 1; \
+ aes->ctrl.GO = 1; \
+ } while(0)
+
+#define SHA_HASH_INIT \
+ do { \
+ volatile struct deu_hash *hash = \
+ (struct deu_hash *) HASH_START; \
+ hash->ctrl.SM = 1; \
+ hash->ctrl.ALGO = 0; \
+ hash->ctrl.INIT = 1; \
+ } while(0)
+
+/* DEU Common Structures for AR9*/
+
+struct deu_clk_ctrl {
+ u32 Res:26;
+ u32 FSOE:1;
+ u32 SBWE:1;
+ u32 EDIS:1;
+ u32 SPEN:1;
+ u32 DISS:1;
+ u32 DISR:1;
+};
+
+struct deu_des {
+ struct deu_des_ctrl { /* 10h */
+ u32 KRE:1;
+ u32 reserved1:5;
+ u32 GO:1;
+ u32 STP:1;
+ u32 Res2:6;
+ u32 NDC:1;
+ u32 ENDI:1;
+ u32 Res3:2;
+ u32 F:3;
+ u32 O:3;
+ u32 BUS:1;
+ u32 DAU:1;
+ u32 ARS:1;
+ u32 SM:1;
+ u32 E_D:1;
+ u32 M:3;
+ } ctrl;
+
+ u32 IHR; /* 14h */
+ u32 ILR; /* 18h */
+ u32 K1HR; /* 1c */
+ u32 K1LR;
+ u32 K2HR;
+ u32 K2LR;
+ u32 K3HR;
+ u32 K3LR; /* 30h */
+ u32 IVHR; /* 34h */
+ u32 IVLR; /* 38 */
+ u32 OHR; /* 3c */
+ u32 OLR; /* 40 */
+};
+
+struct deu_aes {
+ struct deu_aes_ctrl {
+ u32 KRE:1;
+ u32 reserved1:4;
+ u32 PNK:1;
+ u32 GO:1;
+ u32 STP:1;
+ u32 reserved2:6;
+ u32 NDC:1;
+ u32 ENDI:1;
+ u32 reserved3:2;
+ u32 F:3; /* fbs */
+ u32 O:3; /* om */
+ u32 BUS:1; /* bsy */
+ u32 DAU:1;
+ u32 ARS:1;
+ u32 SM:1;
+ u32 E_D:1;
+ u32 KV:1;
+ u32 K:2; /* KL */
+ } ctrl;
+
+ u32 ID3R; /* 80h */
+ u32 ID2R; /* 84h */
+ u32 ID1R; /* 88h */
+ u32 ID0R; /* 8Ch */
+ u32 K7R; /* 90h */
+ u32 K6R; /* 94h */
+ u32 K5R; /* 98h */
+ u32 K4R; /* 9Ch */
+ u32 K3R; /* A0h */
+ u32 K2R; /* A4h */
+ u32 K1R; /* A8h */
+ u32 K0R; /* ACh */
+ u32 IV3R; /* B0h */
+ u32 IV2R; /* B4h */
+ u32 IV1R; /* B8h */
+ u32 IV0R; /* BCh */
+ u32 OD3R; /* D4h */
+ u32 OD2R; /* D8h */
+ u32 OD1R; /* DCh */
+ u32 OD0R; /* E0h */
+};
+
+struct deu_arc4 {
+ struct arc4_controlr {
+ u32 KRE:1;
+ u32 KLEN:4;
+ u32 KSAE:1;
+ u32 GO:1;
+ u32 STP:1;
+ u32 reserved1:6;
+ u32 NDC:1;
+ u32 ENDI:1;
+ u32 reserved2:8;
+ u32 BUS:1; /* bsy */
+ u32 reserved3:1;
+ u32 ARS:1;
+ u32 SM:1;
+ u32 reserved4:4;
+ } ctrl;
+
+ u32 K3R; /* 104h */
+ u32 K2R; /* 108h */
+ u32 K1R; /* 10Ch */
+ u32 K0R; /* 110h */
+ u32 IDLEN; /* 114h */
+ u32 ID3R; /* 118h */
+ u32 ID2R; /* 11Ch */
+ u32 ID1R; /* 120h */
+ u32 ID0R; /* 124h */
+ u32 OD3R; /* 128h */
+ u32 OD2R; /* 12Ch */
+ u32 OD1R; /* 130h */
+ u32 OD0R; /* 134h */
+};
+
+struct deu_hash {
+ struct deu_hash_ctrl {
+ u32 reserved1:5;
+ u32 KHS:1;
+ u32 GO:1;
+ u32 INIT:1;
+ u32 reserved2:6;
+ u32 NDC:1;
+ u32 ENDI:1;
+ u32 reserved3:7;
+ u32 DGRY:1;
+ u32 BSY:1;
+ u32 reserved4:1;
+ u32 IRCL:1;
+ u32 SM:1;
+ u32 KYUE:1;
+ u32 HMEN:1;
+ u32 SSEN:1;
+ u32 ALGO:1;
+ } ctrl;
+
+ u32 MR; /* B4h */
+ u32 D1R; /* B8h */
+ u32 D2R; /* BCh */
+ u32 D3R; /* C0h */
+ u32 D4R; /* C4h */
+ u32 D5R; /* C8h */
+ u32 dummy; /* CCh */
+ u32 KIDX; /* D0h */
+ u32 KEY; /* D4h */
+ u32 DBN; /* D8h */
+};
+
+struct deu_dma {
+ struct deu_dma_ctrl {
+ u32 reserved1:22;
+ u32 BS:2;
+ u32 BSY:1;
+ u32 reserved2:1;
+ u32 ALGO:2;
+ u32 RXCLS:2;
+ u32 reserved3:1;
+ u32 EN:1;
+ } ctrl;
+};
+
+#endif /* DEU_AR9_H */
--- /dev/null
+++ b/drivers/crypto/lantiq/deu_danube.c
@@ -0,0 +1,484 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <asm/io.h> /* dma_cache_inv */
+#include <linux/platform_device.h>
+
+#ifdef CONFIG_SOC_LANTIQ_XWAY
+
+#include "deu.h"
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief DEU driver module
+*/
+
+/**
+ \file deu_danube.c
+ \ingroup LQ_DEU
+ \brief board specific DEU driver file for danube
+*/
+
+/**
+ \defgroup BOARD_SPECIFIC_FUNCTIONS LQ_BOARD_SPECIFIC_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief board specific DEU functions
+*/
+
+static int danube_pre_1_4;
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+u32 *des_buff_in = NULL;
+u32 *des_buff_out = NULL;
+u32 *aes_buff_in = NULL;
+u32 *aes_buff_out = NULL;
+
+struct lq_deu_device lq_deu[1];
+
+static u8 *g_dma_page_ptr = NULL;
+static u8 *g_dma_block = NULL;
+static u8 *g_dma_block2 = NULL;
+
+/** \fn int dma_init(void)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief Initialize DMA for DEU usage. DMA specific registers are
+ * intialized here, including a pointer to the device, memory
+ * space for the device and DEU-DMA descriptors
+ * \return -1 if fail, otherwise return 0
+*/
+static int dma_init(void)
+{
+ struct dma_device_info *dma_device = NULL;
+ int i = 0;
+ volatile struct deu_dma *dma = (struct deu_dma *) LQ_DEU_DMA_CON;
+ struct dma_device_info *deu_dma_device_ptr;
+
+ /* get one free page and share between g_dma_block and g_dma_block2 */
+ printk("PAGE_SIZE = %ld\n", PAGE_SIZE);
+ /* need 16-byte alignment memory block */
+ g_dma_page_ptr = (u8 *)__get_free_page(GFP_KERNEL);
+ /* need 16-byte alignment memory block */
+ g_dma_block = g_dma_page_ptr;
+ /* need 16-byte alignment memory block */
+ g_dma_block2 = (u8 *)(g_dma_page_ptr + (PAGE_SIZE >> 1));
+
+ deu_dma_device_ptr = dma_device_reserve("DEU");
+ if (!deu_dma_device_ptr) {
+ printk("DEU: reserve DMA fail!\n");
+ return -1;
+ }
+ lq_deu[0].dma_device = deu_dma_device_ptr;
+ dma_device = deu_dma_device_ptr;
+ /* dma_device->priv = &deu_dma_priv; */
+ dma_device->buffer_alloc = &deu_dma_buffer_alloc;
+ dma_device->buffer_free = &deu_dma_buffer_free;
+ dma_device->intr_handler = &deu_dma_intr_handler;
+ dma_device->tx_endianness_mode = LQ_DMA_ENDIAN_TYPE3;
+ dma_device->rx_endianness_mode = LQ_DMA_ENDIAN_TYPE3;
+ dma_device->port_num = 1;
+ dma_device->tx_burst_len = 4;
+ dma_device->max_rx_chan_num = 1;
+ dma_device->max_tx_chan_num = 1;
+ dma_device->port_packet_drop_enable = 0;
+
+ for (i = 0; i < dma_device->max_rx_chan_num; i++) {
+ dma_device->rx_chan[i]->packet_size = DEU_MAX_PACKET_SIZE;
+ dma_device->rx_chan[i]->desc_len = 1;
+ dma_device->rx_chan[i]->control = LQ_DMA_CH_ON;
+ dma_device->rx_chan[i]->byte_offset = 0;
+ dma_device->rx_chan[i]->chan_poll_enable = 1;
+
+ }
+
+ for (i = 0; i < dma_device->max_tx_chan_num; i++) {
+ dma_device->tx_chan[i]->control = LQ_DMA_CH_ON;
+ dma_device->tx_chan[i]->desc_len = 1;
+ dma_device->tx_chan[i]->chan_poll_enable = 1;
+ }
+
+ dma_device->current_tx_chan = 0;
+ dma_device->current_rx_chan = 0;
+
+ dma_device_register(dma_device);
+ for (i = 0; i < dma_device->max_rx_chan_num; i++) {
+ (dma_device->rx_chan[i])->open(dma_device->rx_chan[i]);
+ }
+
+ dma->ctrl.BS = 0;
+ dma->ctrl.RXCLS = 0;
+ dma->ctrl.EN = 1;
+
+
+ *LQ_DMA_PS = 1;
+
+ /* DANUBE PRE 1.4 SOFTWARE FIX */
+ if (danube_pre_1_4)
+ *LQ_DMA_PCTRL = 0x14;
+ else
+ *LQ_DMA_PCTRL = 0xF14;
+
+ return 0;
+}
+
+/** \fn u32 *dma_align(const u8 *arg, u32 *buffer_alloc, int in_buff, int nbytes)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief A fix to align mis-aligned address for Danube version 1.3 chips
+ * which has memory alignment issues.
+ * \param arg Pointer to the input / output memory address
+ * \param buffer_alloc A pointer to the buffer
+ * \param in_buff Input (if == 1) or Output (if == 0) buffer
+ * \param nbytes Number of bytes of data
+ * \return returns arg: if address is aligned, buffer_alloc: if memory address is not aligned
+*/
+static u32 *dma_align(const u8 *arg, u32 *buffer_alloc, int in_buff, int nbytes)
+{
+ if (danube_pre_1_4) {
+ /* for input buffer */
+ if (in_buff) {
+ if (((u32) arg) & 0xF) {
+ memcpy(buffer_alloc, arg, nbytes);
+ return (u32 *) buffer_alloc;
+ } else {
+ return (u32 *) arg;
+ }
+ }
+ else {
+ /* for output buffer */
+ if (((u32) arg) & 0x3)
+ return buffer_alloc;
+ else
+ return (u32 *) arg;
+ }
+ }
+
+ return (u32 *) arg;
+}
+
+/** \fn void aes_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief copy the DMA data to the memory address space for AES. The swaping
+ * of the 4 bytes is done only for Danube version 1.3 (FIX). Otherwise,
+ * it is a direct memory copy to out_arg pointer
+ * \param outcopy Pointer to the address to store swapped copy
+ * \param out_dma A pointer to the memory address that stores the DMA data
+ * \param out_arg The pointer to the memory address that needs to be copied to
+ * \param nbytes Number of bytes of data
+*/
+static void aes_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
+{
+ int i = 0;
+ int x = 0;
+
+ /* DANUBE PRE 1.4 SOFTWARE FIX */
+ if (danube_pre_1_4) {
+ for (i = 0; i < (nbytes / 4); i++) {
+ x = i ^ 0x3;
+ outcopy[i] = out_dma[x];
+
+ }
+ if (((u32) out_arg) & 0x3) {
+ memcpy((u8 *)out_arg, outcopy, nbytes);
+ }
+ } else {
+ memcpy(out_arg, out_dma, nbytes);
+ }
+}
+
+/** \fn void des_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief copy the DMA data to the memory address space for DES. The swaping
+ * of the 4 bytes is done only for Danube version 1.3 (FIX). Otherwise,
+ * it is a direct memory copy to out_arg pointer
+ * \param outcopy Pointer to the address to store swapped copy
+ * \param out_dma A pointer to the memory address that stores the DMA data
+ * \param out_arg The pointer to the memory address that needs to be copied to
+ * \param nbytes Number of bytes of data
+*/
+static void des_dma_memcpy(u32 *outcopy, u32 *out_dma, u8 *out_arg, int nbytes)
+{
+ int i = 0;
+ int x = 0;
+
+ /* DANUBE PRE 1.4 SOFTWARE FIX */
+ if (danube_pre_1_4) {
+ for (i = 0; i < (nbytes / 4); i++) {
+ x = i ^ 1;
+ outcopy[i] = out_dma[x];
+
+ }
+ if (((u32) out_arg) & 0x3) {
+ memcpy((u8 *)out_arg, outcopy, nbytes);
+ }
+ } else {
+ memcpy(out_arg, out_dma, nbytes);
+ }
+}
+
+/** \fn int des_dma_malloc(int value)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief allocates memory to the necessary memory input/output buffer
+ * location, used during the DES algorithm DMA transfer (memory
+ * alignment issues)
+ * \param value value determinds whether the calling of the function is for a
+ * input buffer or for an output buffer memory allocation
+*/
+static int des_dma_malloc(int value)
+{
+ if (danube_pre_1_4) {
+ if (value == BUFFER_IN) {
+ des_buff_in = kmalloc(DEU_MAX_PACKET_SIZE, GFP_ATOMIC);
+ if (!des_buff_in)
+ return -1;
+ else
+ return 0;
+ }
+ else {
+ des_buff_out = kmalloc(DEU_MAX_PACKET_SIZE, GFP_ATOMIC);
+ if (!des_buff_out)
+ return -1;
+ else
+ return 0;
+ }
+ } else {
+ return 0;
+ }
+}
+
+/** \fn int aes_dma_malloc(int value)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief allocates memory to the necessary memory input/output buffer
+ * location, used during the AES algorithm DMA transfer (memory
+ * alignment issues)
+ * \param value value determinds whether the calling of the function is for a
+ * input buffer or for an output buffer memory allocation
+*/
+static int aes_dma_malloc(int value)
+{
+ if (danube_pre_1_4) {
+ if (value == BUFFER_IN) {
+ aes_buff_in = kmalloc(DEU_MAX_PACKET_SIZE, GFP_ATOMIC);
+ if (!aes_buff_in)
+ return -1;
+ else
+ return 0;
+ }
+ else {
+ aes_buff_out = kmalloc(DEU_MAX_PACKET_SIZE, GFP_ATOMIC);
+ if (!aes_buff_out)
+ return -1;
+ else
+ return 0;
+ }
+ } else {
+ return 0;
+ }
+}
+
+/** \fn void dma_free(u32 *addr)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief frees previously allocated memory
+ * \param addr memory address of the buffer that needs to be freed
+*/
+static void dma_free(u32 *addr)
+{
+ if (addr)
+ kfree(addr);
+ return;
+}
+
+/** \fn dma_exit(void)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief unregister dma devices after exit
+*/
+static void dma_exit(void)
+{
+ if (g_dma_page_ptr)
+ free_page((u32) g_dma_page_ptr);
+ dma_device_release(lq_deu[0].dma_device);
+ dma_device_unregister(lq_deu[0].dma_device);
+}
+#endif /* CONFIG_CRYPTO_DEV_LANTIQ_DMA */
+
+/** \fn u32 endian_swap(u32 input)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief function is not used
+ * \param input Data input to be swapped
+ * \return input
+*/
+static u32 endian_swap(u32 input)
+{
+ return input;
+}
+
+/** \fn u32 input_swap(u32 input)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief Swap the input data if the current chip is Danube version
+ * 1.4 and do nothing to the data if the current chip is
+ * Danube version 1.3
+ * \param input data that needs to be swapped
+ * \return input or swapped input
+*/
+static u32 input_swap(u32 input)
+{
+ if (!danube_pre_1_4) {
+ u8 *ptr = (u8 *)&input;
+ return ((ptr[3] << 24) | (ptr[2] << 16) | (ptr[1] << 8) | ptr[0]);
+ } else {
+ return input;
+ }
+}
+
+/** \fn void aes_chip_init(void)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief initialize AES hardware
+*/
+static void aes_chip_init(void)
+{
+ volatile struct deu_aes *aes = (struct deu_aes *) AES_START;
+
+#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ /* start crypto engine with write to ILR */
+ aes->ctrl.SM = 1;
+ aes->ctrl.ARS = 1;
+#else
+ aes->ctrl.SM = 1;
+ aes->ctrl.ARS = 1; /* 0 for dma */
+#endif
+}
+
+/** \fn void des_chip_init(void)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief initialize DES hardware
+*/
+static void des_chip_init(void)
+{
+ volatile struct deu_des *des = (struct deu_des *) DES_3DES_START;
+
+#ifndef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ /* start crypto engine with write to ILR */
+ des->ctrl.SM = 1;
+ des->ctrl.ARS = 1;
+#else
+ des->ctrl.SM = 1;
+ des->ctrl.ARS = 1; /* 0 for dma */
+#endif
+}
+
+/** \fn void deu_chip_version(void)
+ * \ingroup LQ_DES_FUNCTIONS
+ * \brief To find the version of the chip by looking at the chip ID
+ * \param danube_pre_1_4 (sets to 1 if Chip is Danube less than v1.4)
+*/
+static void deu_chip_version(void)
+{
+ /* DANUBE PRE 1.4 SOFTWARE FIX */
+ int chip_id = 0;
+ chip_id = *LQ_MPS_CHIPID;
+ chip_id >>= 28;
+
+ if (chip_id >= 4) {
+ danube_pre_1_4 = 0;
+ printk("Danube Chip ver. 1.4 detected. \n");
+ }
+ else {
+ danube_pre_1_4 = 1;
+ printk("Danube Chip ver. 1.3 or below detected. \n");
+ }
+}
+
+static u32 chip_init(void)
+{
+ volatile struct deu_clk_ctrl *clc = (struct deu_clk_ctrl *) LQ_DEU_CLK;
+
+#if 0
+ lq_pmu_enable(1<<20);
+#endif
+
+ deu_chip_version();
+
+ clc->FSOE = 0;
+ clc->SBWE = 0;
+ clc->SPEN = 0;
+ clc->SBWE = 0;
+ clc->DISS = 0;
+ clc->DISR = 0;
+
+ return *LQ_DEU_ID;
+}
+
+static int lq_crypto_probe(struct platform_device *pdev)
+{
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ lq_crypto_ops.dma_init = dma_init;
+ lq_crypto_ops.dma_exit = dma_exit;
+ lq_crypto_ops.aes_dma_memcpy = aes_dma_memcpy;
+ lq_crypto_ops.des_dma_memcpy = des_dma_memcpy;
+ lq_crypto_ops.aes_dma_malloc = aes_dma_malloc;
+ lq_crypto_ops.des_dma_malloc = des_dma_malloc;
+ lq_crypto_ops.dma_align = dma_align;
+ lq_crypto_ops.dma_free = dma_free;
+#endif
+
+ lq_crypto_ops.endian_swap = endian_swap;
+ lq_crypto_ops.input_swap = input_swap;
+ lq_crypto_ops.aes_chip_init = aes_chip_init;
+ lq_crypto_ops.des_chip_init = des_chip_init;
+ lq_crypto_ops.chip_init = chip_init;
+
+ printk("lq_danube_deu: driver loaded!\n");
+
+ lq_deu_init();
+
+ return 0;
+}
+
+static int lq_crypto_remove(struct platform_device *pdev)
+{
+ lq_deu_exit();
+
+ return 0;
+}
+
+static struct platform_driver lq_crypto = {
+ .probe = lq_crypto_probe,
+ .remove = lq_crypto_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "lq_danube_deu"
+ }
+};
+
+static int __init lq_crypto_init(void)
+{
+ return platform_driver_register(&lq_crypto);
+}
+module_init(lq_crypto_init);
+
+static void __exit lq_crypto_exit(void)
+{
+ platform_driver_unregister(&lq_crypto);
+}
+module_exit(lq_crypto_exit);
+
+#endif
--- /dev/null
+++ b/drivers/crypto/lantiq/deu_danube.h
@@ -0,0 +1,255 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus / Infineon Technologies
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief DEU driver module
+*/
+
+/**
+ \file deu_danube.h
+ \brief board specific driver header file for danube
+*/
+
+/**
+ \defgroup BOARD_SPECIFIC_FUNCTIONS LQ_BOARD_SPECIFIC_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief board specific DEU header files
+*/
+
+#ifndef DEU_DANUBE_H
+#define DEU_DANUBE_H
+
+#define LQ_DEU_BASE_ADDR (KSEG1 | 0x1E103100)
+#define LQ_DEU_CLK ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0000))
+#define LQ_DEU_ID ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0008))
+#define LQ_DES_CON ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0010))
+#define LQ_AES_CON ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0050))
+#define LQ_HASH_CON ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x00B0))
+#define LQ_ARC4_CON ((volatile u32 *)(LQ_DEU_BASE_ADDR + 0x0100))
+
+#define ARC4_START LQ_ARC4_CON
+#define DES_3DES_START LQ_DES_CON
+#define HASH_START LQ_HASH_CON
+#define AES_START LQ_AES_CON
+
+#define LQ_MPS (KSEG1 | 0x1F107000)
+#define LQ_MPS_CHIPID ((volatile u32*)(LQ_MPS + 0x0344))
+#define LQ_MPS_CHIPID_VERSION_GET(value) (((value) >> 28) & 0xF)
+#define LQ_MPS_CHIPID_VERSION_SET(value) (((value) & 0xF) << 28)
+#define LQ_MPS_CHIPID_PARTNUM_GET(value) (((value) >> 12) & 0xFFFF)
+#define LQ_MPS_CHIPID_PARTNUM_SET(value) (((value) & 0xFFFF) << 12)
+#define LQ_MPS_CHIPID_MANID_GET(value) (((value) >> 1) & 0x7FF)
+#define LQ_MPS_CHIPID_MANID_SET(value) (((value) & 0x7FF) << 1)
+
+#ifdef CONFIG_CRYPTO_DEV_DMA
+# define DEU_DWORD_REORDERING(ptr, buffer, in_out, bytes) \
+ deu_dma_align(ptr, buffer, in_out, bytes)
+# define AES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes) \
+ deu_aes_dma_memcpy(outcopy, out_dma, out_arg, nbytes)
+# define DES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes) \
+ deu_des_dma_memcpy(outcopy, out_dma, out_arg, nbytes)
+# define BUFFER_IN 1
+# define BUFFER_OUT 0
+# define DELAY_PERIOD 9
+# define AES_ALGO 1
+# define DES_ALGO 0
+# define FREE_MEMORY(buff) deu_dma_free(buff)
+# define ALLOCATE_MEMORY(val, type) type ? \
+ deu_aes_dma_malloc(val) : \
+ deu_des_dma_malloc(val)
+#endif /* CONFIG_CRYPTO_DEV_DMA */
+
+#define INPUT_ENDIAN_SWAP(input) deu_input_swap(input)
+#define DEU_ENDIAN_SWAP(input) deu_endian_swap(input)
+#define AES_DMA_MISC_CONFIG()
+
+#define WAIT_AES_DMA_READY() \
+ do { \
+ int i; \
+ volatile struct deu_dma *dma = \
+ (struct deu_dma *) LQ_DEU_DMA_CON; \
+ volatile struct deu_aes *aes = \
+ (volatile struct deu_aes *) AES_START; \
+ for (i = 0; i < 10; i++) \
+ udelay(DELAY_PERIOD); \
+ while (dma->ctrl.BSY) {}; \
+ while (aes->ctrl.BUS) {}; \
+ } while (0)
+
+#define WAIT_DES_DMA_READY() \
+ do { \
+ int i; \
+ volatile struct deu_dma *dma = \
+ (struct deu_dma *) LQ_DEU_DMA_CON; \
+ volatile struct deu_des *des = \
+ (struct deu_des *) DES_3DES_START; \
+ for (i = 0; i < 10; i++) \
+ udelay(DELAY_PERIOD); \
+ while (dma->ctrl.BSY) {}; \
+ while (des->ctrl.BUS) {}; \
+ } while (0)
+
+#define SHA_HASH_INIT \
+ do { \
+ volatile struct deu_hash *hash = \
+ (struct deu_hash *) HASH_START; \
+ hash->ctrl.SM = 1; \
+ hash->ctrl.ALGO = 0; \
+ hash->ctrl.INIT = 1; \
+ } while(0)
+
+/* DEU STRUCTURES */
+
+struct deu_clk_ctrl {
+ u32 Res:26;
+ u32 FSOE:1;
+ u32 SBWE:1;
+ u32 EDIS:1;
+ u32 SPEN:1;
+ u32 DISS:1;
+ u32 DISR:1;
+};
+
+struct deu_des {
+ struct deu_des_ctrl {
+ u32 KRE:1;
+ u32 reserved1:5;
+ u32 GO:1;
+ u32 STP:1;
+ u32 Res2:6;
+ u32 NDC:1;
+ u32 ENDI:1;
+ u32 Res3:2;
+ u32 F:3;
+ u32 O:3;
+ u32 BUS:1;
+ u32 DAU:1;
+ u32 ARS:1;
+ u32 SM:1;
+ u32 E_D:1;
+ u32 M:3;
+ } ctrl;
+
+ u32 IHR;
+ u32 ILR;
+ u32 K1HR;
+ u32 K1LR;
+ u32 K2HR;
+ u32 K2LR;
+ u32 K3HR;
+ u32 K3LR;
+ u32 IVHR;
+ u32 IVLR;
+ u32 OHR;
+ u32 OLR;
+};
+
+struct deu_aes {
+ struct deu_aes_ctrl {
+ u32 KRE:1;
+ u32 reserved1:4;
+ u32 PNK:1;
+ u32 GO:1;
+ u32 STP:1;
+ u32 reserved2:6;
+ u32 NDC:1;
+ u32 ENDI:1;
+ u32 reserved3:2;
+ u32 F:3; /* fbs */
+ u32 O:3; /* om */
+ u32 BUS:1; /* bsy */
+ u32 DAU:1;
+ u32 ARS:1;
+ u32 SM:1;
+ u32 E_D:1;
+ u32 KV:1;
+ u32 K:2; /* KL */
+ } ctrl;
+
+ u32 ID3R; /* 80h */
+ u32 ID2R; /* 84h */
+ u32 ID1R; /* 88h */
+ u32 ID0R; /* 8Ch */
+ u32 K7R; /* 90h */
+ u32 K6R; /* 94h */
+ u32 K5R; /* 98h */
+ u32 K4R; /* 9Ch */
+ u32 K3R; /* A0h */
+ u32 K2R; /* A4h */
+ u32 K1R; /* A8h */
+ u32 K0R; /* ACh */
+ u32 IV3R; /* B0h */
+ u32 IV2R; /* B4h */
+ u32 IV1R; /* B8h */
+ u32 IV0R; /* BCh */
+ u32 OD3R; /* D4h */
+ u32 OD2R; /* D8h */
+ u32 OD1R; /* DCh */
+ u32 OD0R; /* E0h */
+};
+
+struct deu_hash {
+ struct deu_hash_ctrl {
+ u32 reserved1:5;
+ u32 KHS:1;
+ u32 GO:1;
+ u32 INIT:1;
+ u32 reserved2:6;
+ u32 NDC:1;
+ u32 ENDI:1;
+ u32 reserved3:7;
+ u32 DGRY:1;
+ u32 BSY:1;
+ u32 reserved4:1;
+ u32 IRCL:1;
+ u32 SM:1;
+ u32 KYUE:1;
+ u32 HMEN:1;
+ u32 SSEN:1;
+ u32 ALGO:1;
+ } ctrl;
+
+ u32 MR; /* B4h */
+ u32 D1R; /* B8h */
+ u32 D2R; /* BCh */
+ u32 D3R; /* C0h */
+ u32 D4R; /* C4h */
+ u32 D5R; /* C8h */
+ u32 dummy; /* CCh */
+ u32 KIDX; /* D0h */
+ u32 KEY; /* D4h */
+ u32 DBN; /* D8h */
+};
+
+struct deu_dma {
+ struct deu_dma_ctrl {
+ u32 reserved1:22;
+ u32 BS:2;
+ u32 BSY:1;
+ u32 reserved2:1;
+ u32 ALGO:2;
+ u32 RXCLS:2;
+ u32 reserved3:1;
+ u32 EN:1;
+ } ctrl;
+};
+
+#endif /* DEU_DANUBE_H */
--- /dev/null
+++ b/drivers/crypto/lantiq/deu_dma.c
@@ -0,0 +1,147 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup LQ_API
+ \brief Lantiq DEU driver module
+*/
+
+/**
+ \file deu_dma.c
+ \ingroup LQ_DEU
+ \brief DMA DEU driver file
+*/
+
+/**
+ \defgroup LQ_DMA_FUNCTIONS LQ_DMA_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief DMA DEU driver functions
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include "deu.h"
+#include "deu_dma.h"
+
+/* extern struct deu_drv_priv deu_dma_priv; */
+
+/** \fn int deu_dma_intr_handler(struct dma_device_info *dma_dev, int status)
+ * \ingroup LQ_DMA_FUNCTIONS
+ * \brief callback function for DEU DMA interrupt
+ * \param dma_dev dma device
+ * \param status not used
+*/
+int deu_dma_intr_handler(struct dma_device_info *dma_dev, int status)
+{
+#if 0
+ int len = 0;
+ while (len <= 20000) { len++; }
+ u8 *buf;
+ int len = 0;
+
+ struct deu_drv_priv *deu_priv = (struct deu_drv_priv *)dma_dev->priv;
+ /* printk("status:%d \n",status); */
+ switch(status) {
+ case RCV_INT:
+ len = dma_device_read(dma_dev, (u8 **)&buf, NULL);
+ if ( len != deu_priv->deu_rx_len) {
+ printk(KERN_ERR "%s packet length %d is not "
+ "equal to expect %d\n",
+ __func__, len, deu_priv->deu_rx_len);
+ return -1;
+ }
+ memcpy(deu_priv->deu_rx_buf, buf, deu_priv->deu_rx_len);
+ /* Reset for next usage */
+ deu_priv->deu_rx_buf = NULL;
+ deu_priv->deu_rx_len = 0;
+ DEU_WAKEUP_EVENT(deu_priv->deu_thread_wait, DEU_EVENT,
+ deu_priv->deu_event_flags);
+ break;
+ case TX_BUF_FULL_INT:
+ /* delay for buffer to be cleared */
+ while (len <= 20000) { len++; }
+ break;
+
+ case TRANSMIT_CPT_INT:
+ break;
+ default:
+ break;
+ }
+#endif
+ return 0;
+}
+
+extern u8 *g_dma_block;
+extern u8 *g_dma_block2;
+
+/** \fn u8 *deu_dma_buffer_alloc(int len, int *byte_offset, void **opt)
+ * \ingroup LQ_DMA_FUNCTIONS
+ * \brief callback function for allocating buffers for dma receive descriptors
+ * \param len not used
+ * \param byte_offset dma byte offset
+ * \param *opt not used
+ *
+*/
+u8 *deu_dma_buffer_alloc(int len, int *byte_offset, void **opt)
+{
+ u8 *swap = NULL;
+
+ /* dma-core needs at least 2 blocks of memory */
+ swap = g_dma_block;
+ g_dma_block = g_dma_block2;
+ g_dma_block2 = swap;
+
+ /* dma_cache_wback_inv((unsigned long) g_dma_block,(PAGE_SIZE >> 1)); */
+ *byte_offset = 0;
+
+ return g_dma_block;
+}
+
+/** \fn int deu_dma_buffer_free(u8 * dataptr, void *opt)
+ * \ingroup LQ_DMA_FUNCTIONS
+ * \brief callback function for freeing dma transmit descriptors
+ * \param dataptr data pointer to be freed
+ * \param opt not used
+*/
+int deu_dma_buffer_free(u8 *dataptr, void *opt)
+{
+#if 0
+ printk("Trying to free memory buffer\n");
+ if (dataptr == NULL && opt == NULL)
+ return 0;
+ else if (opt == NULL) {
+ kfree(dataptr);
+ return 1;
+ }
+ else if (dataptr == NULL) {
+ kfree(opt);
+ return 1;
+ }
+ else {
+ kfree(opt);
+ kfree(dataptr);
+ }
+#endif
+ return 0;
+}
--- /dev/null
+++ b/drivers/crypto/lantiq/deu_dma.h
@@ -0,0 +1,78 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+/**
+ \addtogroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief Lantiq DEU driver module
+*/
+
+/**
+ \file deu_dma.h
+ \ingroup LQ_DEU
+ \brief DMA DEU driver header file
+*/
+
+#ifndef DEU_DMA_H
+#define DEU_DMA_H
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/crypto.h>
+#include <asm/scatterlist.h>
+#include <asm/byteorder.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+
+#include <asm/ifx/irq.h>
+#include <asm/ifx/ifx_dma_core.h>
+#ifndef CONFIG_CRYPTO_DEV_POLL_DMA
+# define CONFIG_CRYPTO_DEV_POLL_DMA
+#endif
+
+/* must match the size of memory block allocated for
+ * g_dma_block and g_dma_block2 */
+#define DEU_MAX_PACKET_SIZE (PAGE_SIZE >> 1)
+
+struct lq_deu_device {
+ struct dma_device_info *dma_device;
+ u8 *dst;
+ u8 *src;
+ int len;
+ int dst_count;
+ int src_count;
+ int recv_count;
+ int packet_size;
+ int packet_num;
+ wait_queue_t wait;
+};
+
+extern struct lq_deu_device lq_deu[1];
+
+extern int deu_dma_intr_handler(struct dma_device_info *, int);
+extern u8 *deu_dma_buffer_alloc(int, int *, void **);
+extern int deu_dma_buffer_free(u8 *, void *);
+extern void deu_dma_inactivate_poll(struct dma_device_info* dma_dev);
+extern void deu_dma_activate_poll(struct dma_device_info* dma_dev);
+extern struct dma_device_info* deu_dma_reserve(struct dma_device_info**
+ dma_device);
+extern int deu_dma_release(struct dma_device_info** dma_device);
+
+#endif /* IFMIPS_DEU_DMA_H */
--- /dev/null
+++ b/drivers/crypto/lantiq/md5.c
@@ -0,0 +1,285 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief Lantiq DEU driver module
+*/
+
+/**
+ \file md5.c
+ \ingroup LQ_DEU
+ \brief MD5 encryption DEU driver file
+*/
+
+/**
+ \defgroup LQ_MD5_FUNCTIONS LQ_MD5_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief Lantiq DEU MD5 functions
+*/
+
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/crypto.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include "deu.h"
+
+#define MD5_DIGEST_SIZE 16
+#define MD5_HMAC_BLOCK_SIZE 64
+#define MD5_BLOCK_WORDS 16
+#define MD5_HASH_WORDS 4
+
+static spinlock_t cipher_lock;
+
+struct md5_ctx {
+ u32 hash[MD5_HASH_WORDS];
+ u32 block[MD5_BLOCK_WORDS];
+ u64 byte_count;
+};
+
+/** \fn static u32 md5_endian_swap(u32 input)
+ * \ingroup LQ_MD5_FUNCTIONS
+ * \brief perform dword level endian swap
+ * \param input value of dword that requires to be swapped
+*/
+static u32 md5_endian_swap(u32 input)
+{
+ u8 *ptr = (u8 *)&input;
+
+ return ((ptr[3] << 24) | (ptr[2] << 16) | (ptr[1] << 8) | ptr[0]);
+}
+
+/** \fn static void md5_transform(u32 *hash, u32 const *in)
+ * \ingroup LQ_MD5_FUNCTIONS
+ * \brief main interface to md5 hardware
+ * \param hash current hash value
+ * \param in 64-byte block of input
+*/
+static void md5_transform(u32 *hash, u32 const *in)
+{
+ int i;
+ volatile struct deu_hash *hashs = (struct deu_hash *) HASH_START;
+ ulong flag;
+
+ CRTCL_SECT_START;
+
+ for (i = 0; i < 16; i++) {
+ hashs->MR = md5_endian_swap(in[i]);
+ };
+
+ /* wait for processing */
+ while (hashs->ctrl.BSY) {
+ /* this will not take long */
+ }
+
+ CRTCL_SECT_END;
+}
+
+/** \fn static inline void md5_transform_helper(struct md5_ctx *ctx)
+ * \ingroup LQ_MD5_FUNCTIONS
+ * \brief interfacing function for md5_transform()
+ * \param ctx crypto context
+*/
+static inline void md5_transform_helper(struct md5_ctx *ctx)
+{
+ /* le32_to_cpu_array(ctx->block, sizeof(ctx->block) / sizeof(u32)); */
+ md5_transform(ctx->hash, ctx->block);
+}
+
+/** \fn static void md5_init(struct crypto_tfm *tfm)
+ * \ingroup LQ_MD5_FUNCTIONS
+ * \brief initialize md5 hardware
+ * \param tfm linux crypto algo transform
+*/
+static int md5_init(struct shash_desc *desc)
+{
+ struct md5_ctx *mctx = shash_desc_ctx(desc);
+ volatile struct deu_hash *hash = (struct deu_hash *) HASH_START;
+
+ hash->ctrl.SM = 1;
+ hash->ctrl.ALGO = 1; /* 1 = md5 0 = sha1 */
+ hash->ctrl.INIT = 1; /* Initialize the hash operation by writing
+ a '1' to the INIT bit. */
+
+ mctx->byte_count = 0;
+
+ return 0;
+}
+
+/** \fn static void md5_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
+ * \ingroup LQ_MD5_FUNCTIONS
+ * \brief on-the-fly md5 computation
+ * \param tfm linux crypto algo transform
+ * \param data input data
+ * \param len size of input data
+*/
+static int md5_update(struct shash_desc *desc, const u8 *data, unsigned int len)
+{
+ struct md5_ctx *mctx = shash_desc_ctx(desc);
+ const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f);
+
+ mctx->byte_count += len;
+
+ if (avail > len) {
+ memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
+ data, len);
+ return 0;
+ }
+
+ memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
+ data, avail);
+
+ md5_transform_helper(mctx);
+ data += avail;
+ len -= avail;
+
+ while (len >= sizeof(mctx->block)) {
+ memcpy(mctx->block, data, sizeof(mctx->block));
+ md5_transform_helper(mctx);
+ data += sizeof(mctx->block);
+ len -= sizeof(mctx->block);
+ }
+
+ memcpy(mctx->block, data, len);
+
+ return 0;
+}
+
+/** \fn static void md5_final(struct crypto_tfm *tfm, u8 *out)
+ * \ingroup LQ_MD5_FUNCTIONS
+ * \brief compute final md5 value
+ * \param tfm linux crypto algo transform
+ * \param out final md5 output value
+*/
+static int md5_final(struct shash_desc *desc, u8 *out)
+{
+ struct md5_ctx *mctx = shash_desc_ctx(desc);
+ const unsigned int offset = mctx->byte_count & 0x3f;
+ char *p = (char *)mctx->block + offset;
+ int padding = 56 - (offset + 1);
+ volatile struct deu_hash *hashs = (struct deu_hash *) HASH_START;
+ unsigned long flag;
+
+ *p++ = 0x80;
+ if (padding < 0) {
+ memset(p, 0x00, padding + sizeof (u64));
+ md5_transform_helper(mctx);
+ p = (char *)mctx->block;
+ padding = 56;
+ }
+
+ memset(p, 0, padding);
+ mctx->block[14] = md5_endian_swap(mctx->byte_count << 3);
+ mctx->block[15] = md5_endian_swap(mctx->byte_count >> 29);
+
+#if 0
+ le32_to_cpu_array(mctx->block, (sizeof(mctx->block) -
+ sizeof(u64)) / sizeof(u32));
+#endif
+
+ md5_transform(mctx->hash, mctx->block);
+
+ CRTCL_SECT_START;
+
+ *((u32 *) out + 0) = md5_endian_swap(hashs->D1R);
+ *((u32 *) out + 1) = md5_endian_swap(hashs->D2R);
+ *((u32 *) out + 2) = md5_endian_swap(hashs->D3R);
+ *((u32 *) out + 3) = md5_endian_swap(hashs->D4R);
+
+ CRTCL_SECT_END;
+
+ /* Wipe context */
+ memset(mctx, 0, sizeof(*mctx));
+
+ return 0;
+}
+
+static int md5_export(struct shash_desc *desc, void *out)
+{
+ struct md5_ctx *sctx = shash_desc_ctx(desc);
+
+ memcpy(out, sctx, sizeof(*sctx));
+ return 0;
+}
+
+static int md5_import(struct shash_desc *desc, const void *in)
+{
+ struct md5_ctx *sctx = shash_desc_ctx(desc);
+
+ memcpy(sctx, in, sizeof(*sctx));
+ return 0;
+}
+
+/*
+ * \brief MD5 function mappings
+*/
+static struct shash_alg md5_alg = {
+ .digestsize = MD5_DIGEST_SIZE,
+ .init = md5_init,
+ .update = md5_update,
+ .final = md5_final,
+ .export = md5_export,
+ .import = md5_import,
+ .descsize = sizeof(struct md5_ctx),
+ .statesize = sizeof(struct md5_ctx),
+ .base = {
+ .cra_name = "md5",
+ .cra_driver_name = "lq_deu-md5",
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = MD5_HMAC_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ }
+};
+
+/** \fn int lq_deu_init_md5(void)
+ * \ingroup LQ_MD5_FUNCTIONS
+ * \brief initialize md5 driver
+*/
+int lq_deu_init_md5(void)
+{
+ int ret;
+
+ if ((ret = crypto_register_shash(&md5_alg)))
+ goto md5_err;
+
+ CRTCL_SECT_INIT;
+
+ printk(KERN_NOTICE "Lantiq DEU MD5 initialized%s.\n",
+ disable_deudma ? "" : " (DMA)");
+ return ret;
+
+md5_err:
+ printk(KERN_ERR "Lantiq DEU MD5 initialization failed!\n");
+ return ret;
+}
+
+/** \fn void lq_deu_fini_md5(void)
+ * \ingroup LQ_MD5_FUNCTIONS
+ * \brief unregister md5 driver
+*/
+
+void lq_deu_fini_md5(void)
+{
+ crypto_unregister_shash(&md5_alg);
+}
+
--- /dev/null
+++ b/drivers/crypto/lantiq/md5_hmac.c
@@ -0,0 +1,329 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief Lantiq DEU driver module
+*/
+
+/**
+ \file md5_hmac.c
+ \ingroup LQ_DEU
+ \brief MD5-HMAC encryption DEU driver file
+*/
+
+/**
+ \defgroup LQ_MD5_HMAC_FUNCTIONS LQ_MD5_HMAC_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief Lantiq md5-hmac driver functions
+*/
+
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/crypto.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include "deu.h"
+
+#define MD5_DIGEST_SIZE 16
+#define MD5_HMAC_BLOCK_SIZE 64
+#define MD5_BLOCK_WORDS 16
+#define MD5_HASH_WORDS 4
+#define MD5_HMAC_DBN_TEMP_SIZE 1024 /* size in dword,
+ needed for dbn workaround */
+
+static spinlock_t cipher_lock;
+
+struct md5_hmac_ctx {
+ u32 hash[MD5_HASH_WORDS];
+ u32 block[MD5_BLOCK_WORDS];
+ u64 byte_count;
+ u32 dbn;
+ u32 temp[MD5_HMAC_DBN_TEMP_SIZE];
+};
+
+/** \fn static u32 md5_endian_swap(u32 input)
+ * \ingroup LQ_MD5_HMAC_FUNCTIONS
+ * \brief perform dword level endian swap
+ * \param input value of dword that requires to be swapped
+*/
+static u32 md5_endian_swap(u32 input)
+{
+ u8 *ptr = (u8 *)&input;
+
+ return ((ptr[3] << 24) | (ptr[2] << 16) | (ptr[1] << 8) | ptr[0]);
+}
+
+/** \fn static void md5_hmac_transform(struct crypto_tfm *tfm, u32 const *in)
+ * \ingroup LQ_MD5_HMAC_FUNCTIONS
+ * \brief save input block to context
+ * \param tfm linux crypto algo transform
+ * \param in 64-byte block of input
+*/
+static void md5_hmac_transform(struct shash_desc *desc, u32 const *in)
+{
+ struct md5_hmac_ctx *mctx = shash_desc_ctx(desc);
+
+ memcpy(&mctx->temp[mctx->dbn<<4], in, 64); /* dbn workaround */
+ mctx->dbn += 1;
+
+ if ( (mctx->dbn<<4) > MD5_HMAC_DBN_TEMP_SIZE )
+ {
+ printk("MD5_HMAC_DBN_TEMP_SIZE exceeded\n");
+ }
+}
+
+/** \fn int md5_hmac_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen)
+ * \ingroup LQ_MD5_HMAC_FUNCTIONS
+ * \brief sets md5 hmac key
+ * \param tfm linux crypto algo transform
+ * \param key input key
+ * \param keylen key length greater than 64 bytes IS NOT SUPPORTED
+*/
+static int md5_hmac_setkey(struct crypto_shash *tfm,
+ const u8 *key,
+ unsigned int keylen)
+{
+ volatile struct deu_hash *hash = (struct deu_hash *) HASH_START;
+ int i, j;
+ u32 *in_key = (u32 *)key;
+
+ hash->KIDX = 0x80000000; /* reset all 16 words of the key to '0' */
+ asm("sync");
+
+ j = 0;
+ for (i = 0; i < keylen; i+=4)
+ {
+ hash->KIDX = j;
+ asm("sync");
+ hash->KEY = *((u32 *) in_key + j);
+ j++;
+ }
+
+ return 0;
+}
+
+/** \fn void md5_hmac_init(struct crypto_tfm *tfm)
+ * \ingroup LQ_MD5_HMAC_FUNCTIONS
+ * \brief initialize md5 hmac context
+ * \param tfm linux crypto algo transform
+*/
+static int md5_hmac_init(struct shash_desc *desc)
+{
+ struct md5_hmac_ctx *mctx = shash_desc_ctx(desc);
+
+ memset(mctx, 0, sizeof(struct md5_hmac_ctx));
+ mctx->dbn = 0; /* dbn workaround */
+ return 0;
+}
+
+/** \fn void md5_hmac_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
+ * \ingroup LQ_MD5_HMAC_FUNCTIONS
+ * \brief on-the-fly md5 hmac computation
+ * \param tfm linux crypto algo transform
+ * \param data input data
+ * \param len size of input data
+*/
+static int md5_hmac_update(struct shash_desc *desc,
+ const u8 *data,
+ unsigned int len)
+{
+ struct md5_hmac_ctx *mctx = shash_desc_ctx(desc);
+ const u32 avail = sizeof(mctx->block) - (mctx->byte_count & 0x3f);
+
+ mctx->byte_count += len;
+
+ if (avail > len) {
+ memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
+ data, len);
+ return 0;
+ }
+
+ memcpy((char *)mctx->block + (sizeof(mctx->block) - avail),
+ data, avail);
+
+ md5_hmac_transform(desc, mctx->block);
+ data += avail;
+ len -= avail;
+
+ while (len >= sizeof(mctx->block)) {
+ memcpy(mctx->block, data, sizeof(mctx->block));
+ md5_hmac_transform(desc, mctx->block);
+ data += sizeof(mctx->block);
+ len -= sizeof(mctx->block);
+ }
+
+ memcpy(mctx->block, data, len);
+
+ return 0;
+}
+
+/** \fn void md5_hmac_final(struct crypto_tfm *tfm, u8 *out)
+ * \ingroup LQ_MD5_HMAC_FUNCTIONS
+ * \brief compute final md5 hmac value
+ * \param tfm linux crypto algo transform
+ * \param out final md5 hmac output value
+*/
+static int md5_hmac_final(struct shash_desc *desc, u8 *out)
+{
+ struct md5_hmac_ctx *mctx = shash_desc_ctx(desc);
+ const unsigned int offset = mctx->byte_count & 0x3f;
+ char *p = (char *)mctx->block + offset;
+ int padding = 56 - (offset + 1);
+ volatile struct deu_hash *hashs = (struct deu_hash *) HASH_START;
+ u32 flag;
+ int i = 0;
+ int dbn;
+ u32 *in = &mctx->temp[0];
+
+ *p++ = 0x80;
+ if (padding < 0) {
+ memset(p, 0x00, padding + sizeof (u64));
+ md5_hmac_transform(desc, mctx->block);
+ p = (char *)mctx->block;
+ padding = 56;
+ }
+
+ memset(p, 0, padding);
+ /* need to add 512 bit of the IPAD operation */
+ mctx->block[14] = md5_endian_swap((mctx->byte_count + 64) << 3);
+ mctx->block[15] = 0x00000000;
+
+ md5_hmac_transform(desc, mctx->block);
+
+ CRTCL_SECT_START;
+
+ printk("dbn = %d\n", mctx->dbn);
+ hashs->DBN = mctx->dbn;
+
+ /* khs, go, init, ndc, endi, kyue, hmen, md5 */
+ *LQ_HASH_CON = 0x0703002D;
+
+ /* wait for processing */
+ while (hashs->ctrl.BSY) {
+ /* this will not take long */
+ }
+
+ for (dbn = 0; dbn < mctx->dbn; dbn++)
+ {
+ for (i = 0; i < 16; i++) {
+ hashs->MR = in[i];
+ };
+
+ hashs->ctrl.GO = 1;
+ asm("sync");
+
+ /* wait for processing */
+ while (hashs->ctrl.BSY) {
+ /* this will not take long */
+ }
+
+ in += 16;
+ }
+
+#if 1
+ /* wait for digest ready */
+ while (! hashs->ctrl.DGRY) {
+ /* this will not take long */
+ }
+#endif
+
+ *((u32 *) out + 0) = hashs->D1R;
+ *((u32 *) out + 1) = hashs->D2R;
+ *((u32 *) out + 2) = hashs->D3R;
+ *((u32 *) out + 3) = hashs->D4R;
+ *((u32 *) out + 4) = hashs->D5R;
+
+ CRTCL_SECT_END;
+
+ return 0;
+}
+
+static int md5_hmac_export(struct shash_desc *desc, void *out)
+{
+ struct md5_hmac_ctx *sctx = shash_desc_ctx(desc);
+
+ memcpy(out, sctx, sizeof(*sctx));
+ return 0;
+}
+
+static int md5_hmac_import(struct shash_desc *desc, const void *in)
+{
+ struct md5_hmac_ctx *sctx = shash_desc_ctx(desc);
+
+ memcpy(sctx, in, sizeof(*sctx));
+ return 0;
+}
+
+/*
+ * \brief MD5_HMAC function mappings
+*/
+static struct shash_alg md5_hmac_alg = {
+ .digestsize = MD5_DIGEST_SIZE,
+ .init = md5_hmac_init,
+ .update = md5_hmac_update,
+ .final = md5_hmac_final,
+ .setkey = md5_hmac_setkey,
+ .export = md5_hmac_export,
+ .import = md5_hmac_import,
+ .descsize = sizeof(struct md5_hmac_ctx),
+ .statesize = sizeof(struct md5_hmac_ctx),
+ .base = {
+ .cra_name = "hmac(md5)",
+ .cra_driver_name = "lq_deu-md5_hmac",
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = MD5_HMAC_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ }
+};
+
+/** \fn int lq_deu_init_md5_hmac(void)
+ * \ingroup LQ_MD5_HMAC_FUNCTIONS
+ * \brief initialize md5 hmac driver
+*/
+int lq_deu_init_md5_hmac(void)
+{
+ int ret;
+
+ if ((ret = crypto_register_shash(&md5_hmac_alg)))
+ goto md5_hmac_err;
+
+ CRTCL_SECT_INIT;
+
+ printk(KERN_NOTICE "Lantiq DEU MD5_HMAC initialized%s.\n",
+ disable_deudma ? "" : " (DMA)");
+ return ret;
+
+md5_hmac_err:
+ printk(KERN_ERR "Lantiq DEU MD5_HMAC initialization failed!\n");
+ return ret;
+}
+
+/** \fn void lq_deu_fini_md5_hmac(void)
+ * \ingroup LQ_MD5_HMAC_FUNCTIONS
+ * \brief unregister md5 hmac driver
+*/
+void lq_deu_fini_md5_hmac(void)
+{
+ crypto_unregister_shash(&md5_hmac_alg);
+}
+
--- /dev/null
+++ b/drivers/crypto/lantiq/sha1.c
@@ -0,0 +1,262 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief Lantiq DEU driver module
+*/
+
+/**
+ \file sha1.c
+ \ingroup LQ_DEU
+ \brief SHA1 encryption DEU driver file
+*/
+
+/**
+ \defgroup LQ_SHA1_FUNCTIONS LQ_SHA1_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief Lantiq DEU sha1 functions
+*/
+
+
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/crypto.h>
+#include <linux/cryptohash.h>
+#include <crypto/sha.h>
+#include <linux/types.h>
+#include <asm/scatterlist.h>
+#include <asm/byteorder.h>
+#include "deu.h"
+
+#define SHA1_DIGEST_SIZE 20
+#define SHA1_HMAC_BLOCK_SIZE 64
+
+static spinlock_t cipher_lock;
+
+/*
+ * \brief SHA1 private structure
+*/
+struct sha1_ctx {
+ u64 count;
+ u32 state[5];
+ u8 buffer[64];
+};
+
+/** \fn static void sha1_transform(u32 *state, const u32 *in)
+ * \ingroup LQ_SHA1_FUNCTIONS
+ * \brief main interface to sha1 hardware
+ * \param state current state
+ * \param in 64-byte block of input
+*/
+static void sha1_transform(u32 *state, const u32 *in)
+{
+ int i = 0;
+ volatile struct deu_hash *hashs = (struct deu_hash *) HASH_START;
+ unsigned long flag;
+
+ CRTCL_SECT_START;
+
+ for (i = 0; i < 16; i++) {
+ hashs->MR = in[i];
+ };
+
+ /* wait for processing */
+ while (hashs->ctrl.BSY) {
+ /* this will not take long */
+ }
+
+ CRTCL_SECT_END;
+}
+
+/** \fn static void sha1_init(struct crypto_tfm *tfm)
+ * \ingroup LQ_SHA1_FUNCTIONS
+ * \brief initialize sha1 hardware
+ * \param tfm linux crypto algo transform
+*/
+static int sha1_init(struct shash_desc *desc)
+{
+ struct sha1_ctx *sctx = shash_desc_ctx(desc);
+
+ SHA_HASH_INIT;
+
+ sctx->count = 0;
+
+ return 0;
+}
+
+/** \fn static void sha1_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
+ * \ingroup LQ_SHA1_FUNCTIONS
+ * \brief on-the-fly sha1 computation
+ * \param tfm linux crypto algo transform
+ * \param data input data
+ * \param len size of input data
+*/
+static int sha1_update(struct shash_desc *desc, const u8 *data, unsigned int len)
+{
+ struct sha1_ctx *sctx = shash_desc_ctx(desc);
+ unsigned int i, j;
+
+ j = (sctx->count >> 3) & 0x3f;
+ sctx->count += len << 3;
+
+ if ((j + len) > 63) {
+ memcpy(&sctx->buffer[j], data, (i = 64 - j));
+ sha1_transform(sctx->state, (const u32 *)sctx->buffer);
+ for (; i + 63 < len; i += 64) {
+ sha1_transform(sctx->state, (const u32 *)&data[i]);
+ }
+
+ j = 0;
+ } else {
+ i = 0;
+ }
+
+ memcpy(&sctx->buffer[j], &data[i], len - i);
+
+ return 0;
+}
+
+/** \fn static void sha1_final(struct crypto_tfm *tfm, u8 *out)
+ * \ingroup LQ_SHA1_FUNCTIONS
+ * \brief compute final sha1 value
+ * \param tfm linux crypto algo transform
+ * \param out final md5 output value
+*/
+static int sha1_final(struct shash_desc *desc, u8 *out)
+{
+ struct sha1_ctx *sctx = shash_desc_ctx(desc);
+ u32 index, padlen;
+ u64 t;
+ u8 bits[8] = { 0, };
+ static const u8 padding[64] = { 0x80, };
+ volatile struct deu_hash *hashs = (struct deu_hash *) HASH_START;
+ ulong flag;
+
+ t = sctx->count;
+ bits[7] = 0xff & t;
+ t >>= 8;
+ bits[6] = 0xff & t;
+ t >>= 8;
+ bits[5] = 0xff & t;
+ t >>= 8;
+ bits[4] = 0xff & t;
+ t >>= 8;
+ bits[3] = 0xff & t;
+ t >>= 8;
+ bits[2] = 0xff & t;
+ t >>= 8;
+ bits[1] = 0xff & t;
+ t >>= 8;
+ bits[0] = 0xff & t;
+
+ /* Pad out to 56 mod 64 */
+ index = (sctx->count >> 3) & 0x3f;
+ padlen = (index < 56) ? (56 - index) : ((64 + 56) - index);
+ sha1_update(desc, padding, padlen);
+
+ /* Append length */
+ sha1_update(desc, bits, sizeof bits);
+
+ CRTCL_SECT_START;
+
+ *((u32 *) out + 0) = hashs->D1R;
+ *((u32 *) out + 1) = hashs->D2R;
+ *((u32 *) out + 2) = hashs->D3R;
+ *((u32 *) out + 3) = hashs->D4R;
+ *((u32 *) out + 4) = hashs->D5R;
+
+ CRTCL_SECT_END;
+
+ /* Wipe context*/
+ memset(sctx, 0, sizeof *sctx);
+
+ return 0;
+}
+
+static int sha1_export(struct shash_desc *desc, void *out)
+{
+ struct sha1_ctx *sctx = shash_desc_ctx(desc);
+
+ memcpy(out, sctx, sizeof(*sctx));
+ return 0;
+}
+
+static int sha1_import(struct shash_desc *desc, const void *in)
+{
+ struct sha1_ctx *sctx = shash_desc_ctx(desc);
+
+ memcpy(sctx, in, sizeof(*sctx));
+ return 0;
+}
+
+/*
+ * \brief SHA1 function mappings
+*/
+static struct shash_alg deu_sha1_alg = {
+ .digestsize = SHA1_DIGEST_SIZE,
+ .init = sha1_init,
+ .update = sha1_update,
+ .final = sha1_final,
+ .export = sha1_export,
+ .import = sha1_import,
+ .descsize = sizeof(struct sha1_ctx),
+ .statesize = sizeof(struct sha1_ctx),
+ .base = {
+ .cra_name = "sha1",
+ .cra_driver_name = "lq_deu-sha1",
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = SHA1_HMAC_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ }
+};
+
+/** \fn int lq_deu_init_sha1(void)
+ * \ingroup LQ_SHA1_FUNCTIONS
+ * \brief initialize sha1 driver
+*/
+int lq_deu_init_sha1(void)
+{
+ int ret;
+
+ if ((ret = crypto_register_shash(&deu_sha1_alg)))
+ goto sha1_err;
+
+ CRTCL_SECT_INIT;
+
+ printk(KERN_NOTICE "Lantiq DEU SHA1 initialized%s.\n",
+ disable_deudma ? "" : " (DMA)");
+ return ret;
+
+sha1_err:
+ printk(KERN_ERR "Lantiq DEU SHA1 initialization failed!\n");
+ return ret;
+}
+
+/** \fn void lq_deu_fini_sha1(void)
+ * \ingroup LQ_SHA1_FUNCTIONS
+ * \brief unregister sha1 driver
+*/
+void lq_deu_fini_sha1(void)
+{
+ crypto_unregister_shash(&deu_sha1_alg);
+}
--- /dev/null
+++ b/drivers/crypto/lantiq/sha1_hmac.c
@@ -0,0 +1,325 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief Lantiq DEU driver module
+*/
+
+/**
+ \file sha1_hmac.c
+ \ingroup LQ_DEU
+ \brief SHA1-HMAC DEU driver file
+*/
+
+/**
+ \defgroup LQ_SHA1_HMAC_FUNCTIONS LQ_SHA1_HMAC_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief Lantiq sha1 hmac functions
+*/
+
+
+#include <crypto/internal/hash.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/crypto.h>
+#include <linux/cryptohash.h>
+#include <linux/types.h>
+#include <asm/scatterlist.h>
+#include <asm/byteorder.h>
+#include <linux/delay.h>
+#include "deu.h"
+
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_SHA1_HMAC
+
+#define SHA1_DIGEST_SIZE 20
+#define SHA1_HMAC_BLOCK_SIZE 64
+/* size in dword, needed for dbn workaround */
+#define SHA1_HMAC_DBN_TEMP_SIZE 1024
+
+static spinlock_t cipher_lock;
+
+struct sha1_hmac_ctx {
+ u64 count;
+ u32 state[5];
+ u8 buffer[64];
+ u32 dbn;
+ u32 temp[SHA1_HMAC_DBN_TEMP_SIZE];
+};
+
+/** \fn static void sha1_hmac_transform(struct crypto_tfm *tfm, u32 const *in)
+ * \ingroup LQ_SHA1_HMAC_FUNCTIONS
+ * \brief save input block to context
+ * \param tfm linux crypto algo transform
+ * \param in 64-byte block of input
+*/
+static void sha1_hmac_transform(struct shash_desc *desc, u32 const *in)
+{
+ struct sha1_hmac_ctx *sctx = shash_desc_ctx(desc);
+
+ memcpy(&sctx->temp[sctx->dbn<<4], in, 64); /* dbn workaround */
+ sctx->dbn += 1;
+
+ if ((sctx->dbn<<4) > SHA1_HMAC_DBN_TEMP_SIZE) {
+ printk("SHA1_HMAC_DBN_TEMP_SIZE exceeded\n");
+ }
+}
+
+/** \fn int sha1_hmac_setkey(struct crypto_tfm *tfm, const u8 *key, unsigned int keylen)
+ * \ingroup LQ_SHA1_HMAC_FUNCTIONS
+ * \brief sets sha1 hmac key
+ * \param tfm linux crypto algo transform
+ * \param key input key
+ * \param keylen key length greater than 64 bytes IS NOT SUPPORTED
+*/
+static int sha1_hmac_setkey(struct crypto_shash *tfm,
+ const u8 *key,
+ unsigned int keylen)
+{
+ volatile struct deu_hash *hash = (struct deu_hash *) HASH_START;
+ int i, j;
+ u32 *in_key = (u32 *)key;
+
+ hash->KIDX = 0x80000000; /* reset all 16 words of the key to '0' */
+ asm("sync");
+
+ j = 0;
+ for (i = 0; i < keylen; i+=4)
+ {
+ hash->KIDX = j;
+ asm("sync");
+ hash->KEY = *((u32 *) in_key + j);
+ j++;
+ }
+
+ return 0;
+}
+
+static int sha1_hmac_export(struct shash_desc *desc, void *out)
+{
+ struct sha1_hmac_ctx *sctx = shash_desc_ctx(desc);
+
+ memcpy(out, sctx, sizeof(*sctx));
+ return 0;
+}
+
+static int sha1_hmac_import(struct shash_desc *desc, const void *in)
+{
+ struct sha1_hmac_ctx *sctx = shash_desc_ctx(desc);
+
+ memcpy(sctx, in, sizeof(*sctx));
+ return 0;
+}
+
+/** \fn void sha1_hmac_init(struct crypto_tfm *tfm)
+ * \ingroup LQ_SHA1_HMAC_FUNCTIONS
+ * \brief initialize sha1 hmac context
+ * \param tfm linux crypto algo transform
+*/
+static int sha1_hmac_init(struct shash_desc *desc)
+{
+ struct sha1_hmac_ctx *sctx = shash_desc_ctx(desc);
+
+ memset(sctx, 0, sizeof(struct sha1_hmac_ctx));
+ sctx->dbn = 0; /* dbn workaround */
+
+ return 0;
+}
+
+/** \fn static void sha1_hmac_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
+ * \ingroup LQ_SHA1_HMAC_FUNCTIONS
+ * \brief on-the-fly sha1 hmac computation
+ * \param tfm linux crypto algo transform
+ * \param data input data
+ * \param len size of input data
+*/
+static int sha1_hmac_update(struct shash_desc *desc, const u8 *data,
+ unsigned int len)
+{
+ struct sha1_hmac_ctx *sctx = shash_desc_ctx(desc);
+ unsigned int i, j;
+
+ j = (sctx->count >> 3) & 0x3f;
+ sctx->count += len << 3;
+ /* printk("sctx->count = %d\n", (sctx->count >> 3)); */
+
+ if ((j + len) > 63) {
+ memcpy(&sctx->buffer[j], data, (i = 64 - j));
+ sha1_hmac_transform(desc, (const u32 *)sctx->buffer);
+ for (; i + 63 < len; i += 64) {
+ sha1_hmac_transform(desc, (const u32 *)&data[i]);
+ }
+
+ j = 0;
+ } else {
+ i = 0;
+ }
+
+ memcpy(&sctx->buffer[j], &data[i], len - i);
+
+ return 0;
+}
+
+/** \fn static void sha1_hmac_final(struct crypto_tfm *tfm, u8 *out)
+ * \ingroup LQ_SHA1_HMAC_FUNCTIONS
+ * \brief ompute final sha1 hmac value
+ * \param tfm linux crypto algo transform
+ * \param out final sha1 hmac output value
+*/
+static int sha1_hmac_final(struct shash_desc *desc, u8 *out)
+{
+ struct sha1_hmac_ctx *sctx = shash_desc_ctx(desc);
+ u32 index, padlen;
+ u64 t;
+ u8 bits[8] = { 0, };
+ static const u8 padding[64] = { 0x80, };
+ volatile struct deu_hash *hashs = (struct deu_hash *) HASH_START;
+ ulong flag;
+ int i = 0;
+ int dbn;
+ u32 *in = &sctx->temp[0];
+
+ t = sctx->count + 512; /* need to add 512 bit of the IPAD operation */
+ bits[7] = 0xff & t;
+ t >>= 8;
+ bits[6] = 0xff & t;
+ t >>= 8;
+ bits[5] = 0xff & t;
+ t >>= 8;
+ bits[4] = 0xff & t;
+ t >>= 8;
+ bits[3] = 0xff & t;
+ t >>= 8;
+ bits[2] = 0xff & t;
+ t >>= 8;
+ bits[1] = 0xff & t;
+ t >>= 8;
+ bits[0] = 0xff & t;
+
+ /* Pad out to 56 mod 64 */
+ index = (sctx->count >> 3) & 0x3f;
+ padlen = (index < 56) ? (56 - index) : ((64 + 56) - index);
+ sha1_hmac_update(desc, padding, padlen);
+
+ /* Append length */
+ sha1_hmac_update(desc, bits, sizeof bits);
+
+ CRTCL_SECT_START;
+
+ hashs->DBN = sctx->dbn;
+
+ /* for vr9 change, ENDI = 1 */
+ *LQ_HASH_CON = HASH_CON_VALUE;
+
+ /* wait for processing */
+ while (hashs->ctrl.BSY) {
+ /* this will not take long */
+ }
+
+ for (dbn = 0; dbn < sctx->dbn; dbn++)
+ {
+ for (i = 0; i < 16; i++) {
+ hashs->MR = in[i];
+ };
+
+ hashs->ctrl.GO = 1;
+ asm("sync");
+
+ /* wait for processing */
+ while (hashs->ctrl.BSY) {
+ /* this will not take long */
+ }
+
+ in += 16;
+
+ return 0;
+ }
+
+#if 1
+ /* wait for digest ready */
+ while (! hashs->ctrl.DGRY) {
+ /* this will not take long */
+ }
+#endif
+
+ *((u32 *) out + 0) = hashs->D1R;
+ *((u32 *) out + 1) = hashs->D2R;
+ *((u32 *) out + 2) = hashs->D3R;
+ *((u32 *) out + 3) = hashs->D4R;
+ *((u32 *) out + 4) = hashs->D5R;
+
+ CRTCL_SECT_END;
+}
+
+/*
+ * \brief SHA1-HMAC function mappings
+*/
+static struct shash_alg sha1_hmac_alg = {
+ .digestsize = SHA1_DIGEST_SIZE,
+ .init = sha1_hmac_init,
+ .update = sha1_hmac_update,
+ .final = sha1_hmac_final,
+ .export = sha1_hmac_export,
+ .import = sha1_hmac_import,
+ .setkey = sha1_hmac_setkey,
+ .descsize = sizeof(struct sha1_hmac_ctx),
+ .statesize = sizeof(struct sha1_hmac_ctx),
+ .base = {
+ .cra_name = "hmac(sha1)",
+ .cra_driver_name = "lq_deu-sha1_hmac",
+ .cra_flags = CRYPTO_ALG_TYPE_SHASH,
+ .cra_blocksize = SHA1_HMAC_BLOCK_SIZE,
+ .cra_module = THIS_MODULE,
+ }
+};
+
+/** \fn int lq_deu_init_sha1_hmac(void)
+ * \ingroup LQ_SHA1_HMAC_FUNCTIONS
+ * \brief initialize sha1 hmac driver
+*/
+int lq_deu_init_sha1_hmac(void)
+{
+ int ret;
+
+ if ((ret = crypto_register_shash(&sha1_hmac_alg)))
+ goto sha1_err;
+
+ CRTCL_SECT_INIT;
+
+ printk(KERN_NOTICE "Lantiq DEU SHA1_HMAC initialized%s.\n",
+ disable_deudma ? "" : " (DMA)");
+ return ret;
+
+sha1_err:
+ printk(KERN_ERR "Lantiq DEU SHA1_HMAC initialization failed!\n");
+ return ret;
+}
+
+/** \fn void lq_deu_fini_sha1_hmac(void)
+ * \ingroup LQ_SHA1_HMAC_FUNCTIONS
+ * \brief unregister sha1 hmac driver
+*/
+void lq_deu_fini_sha1_hmac(void)
+{
+ crypto_unregister_shash(&sha1_hmac_alg);
+}
+
+#endif
--- /dev/null
+++ b/drivers/crypto/lantiq/deu_falcon.c
@@ -0,0 +1,163 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <asm/io.h> /* dma_cache_inv */
+#include <linux/platform_device.h>
+
+#ifdef CONFIG_SOC_LANTIQ_FALCON
+
+#include "deu.h"
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief Lantiq DEU driver module
+*/
+
+/**
+ \file deu_falcon.c
+ \brief Lantiq DEU board specific driver file for ar9
+*/
+
+/**
+ \defgroup BOARD_SPECIFIC_FUNCTIONS LQ_BOARD_SPECIFIC_FUNCTIONS
+ \ingroup LQ_DEU
+ \brief board specific functions
+*/
+
+#include <falcon/gpon_reg_base.h>
+#include <falcon/sys1_reg.h>
+#include <falcon/status_reg.h>
+#include <falcon/sysctrl.h>
+
+#define reg_r32(reg) __raw_readl(reg)
+#define reg_w32(val, reg) __raw_writel(val, reg)
+#define reg_w32_mask(clear, set, reg) reg_w32((reg_r32(reg) & ~(clear)) | (set), reg)
+
+static gpon_sys1_t * const sys1 = (gpon_sys1_t *)GPON_SYS1_BASE;
+static gpon_status_t * const status = (gpon_status_t *)GPON_STATUS_BASE;
+
+/** \fn u32 endian_swap(u32 input)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief Swap data given to the function
+ * \param input Data input to be swapped
+ * \return either the swapped data or the input data depending on whether it is in DMA mode or FPI mode
+*/
+static u32 endian_swap(u32 input)
+{
+ return input;
+}
+
+/** \fn u32 input_swap(u32 input)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief Not used
+ * \return input
+*/
+static u32 input_swap(u32 input)
+{
+ return input;
+}
+
+/** \fn void aes_chip_init(void)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief initialize AES hardware
+*/
+static void aes_chip_init(void)
+{
+ volatile struct deu_aes *aes = (struct deu_aes *) AES_START;
+
+ aes->ctrl.SM = 1;
+ aes->ctrl.ARS = 1;
+}
+
+/** \fn void des_chip_init(void)
+ * \ingroup BOARD_SPECIFIC_FUNCTIONS
+ * \brief initialize DES hardware
+*/
+static void des_chip_init(void)
+{
+}
+
+static u32 chip_init(void)
+{
+ sys1_hw_clk_enable(CLKEN_SHA1_SET | CLKEN_AES_SET);
+ sys1_hw_activate(ACT_SHA1_SET | ACT_AES_SET);
+
+ return LQ_DEU_ID_AES | LQ_DEU_ID_HASH;
+}
+
+static int lq_crypto_probe(struct platform_device *pdev)
+{
+#ifdef CONFIG_CRYPTO_DEV_LANTIQ_DMA
+ lq_crypto_ops.dma_init = NULL;
+ lq_crypto_ops.dma_exit = NULL;
+ lq_crypto_ops.aes_dma_memcpy = NULL;
+ lq_crypto_ops.des_dma_memcpy = NULL;
+ lq_crypto_ops.aes_dma_malloc = NULL;
+ lq_crypto_ops.des_dma_malloc = NULL;
+ lq_crypto_ops.dma_align = NULL;
+ lq_crypto_ops.dma_free = NULL;
+#endif
+
+ lq_crypto_ops.endian_swap = endian_swap;
+ lq_crypto_ops.input_swap = input_swap;
+ lq_crypto_ops.aes_chip_init = aes_chip_init;
+ lq_crypto_ops.des_chip_init = des_chip_init;
+ lq_crypto_ops.chip_init = chip_init;
+
+ printk("lq_falcon_deu: driver loaded!\n");
+
+ lq_deu_init();
+
+ return 0;
+}
+
+static int lq_crypto_remove(struct platform_device *pdev)
+{
+ lq_deu_exit();
+
+ return 0;
+}
+
+static struct platform_driver lq_crypto = {
+ .probe = lq_crypto_probe,
+ .remove = lq_crypto_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "lq_falcon_deu"
+ }
+};
+
+static int __init lq_crypto_init(void)
+{
+ return platform_driver_register(&lq_crypto);
+}
+module_init(lq_crypto_init);
+
+static void __exit lq_crypto_exit(void)
+{
+ platform_driver_unregister(&lq_crypto);
+}
+module_exit(lq_crypto_exit);
+
+#endif
--- /dev/null
+++ b/drivers/crypto/lantiq/deu_falcon.h
@@ -0,0 +1,281 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Ralph Hempel <ralph.hempel@lantiq.com>
+ * Copyright (C) 2009 Mohammad Firdaus / Infineon Technologies
+ */
+
+/**
+ \defgroup LQ_DEU LQ_DEU_DRIVERS
+ \ingroup API
+ \brief DEU driver module
+*/
+
+/**
+ \defgroup LQ_DEU_DEFINITIONS LQ_DEU_DEFINITIONS
+ \ingroup LQ_DEU
+ \brief Lantiq DEU definitions
+*/
+
+/**
+ \file deu_falcon.h
+ \brief DEU driver header file
+*/
+
+
+#ifndef DEU_FALCON_H
+#define DEU_FALCON_H
+
+#define HASH_START 0xbd008100
+#define AES_START 0xbd008000
+
+#ifdef CONFIG_CRYPTO_DEV_DMA
+# include "deu_dma.h"
+# define DEU_DWORD_REORDERING(ptr, buffer, in_out, bytes) \
+ deu_dma_align(ptr, buffer, in_out, bytes)
+# define AES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes) \
+ deu_aes_dma_memcpy(outcopy, out_dma, out_arg, nbytes)
+# define DES_MEMORY_COPY(outcopy, out_dma, out_arg, nbytes) \
+ deu_des_dma_memcpy(outcopy, out_dma, out_arg, nbytes)
+# define BUFFER_IN 1
+# define BUFFER_OUT 0
+# define AES_ALGO 1
+# define DES_ALGO 0
+# define ALLOCATE_MEMORY(val, type) 1
+# define FREE_MEMORY(buff)
+extern struct lq_deu_device lq_deu[1];
+#endif /* CONFIG_CRYPTO_DEV_DMA */
+
+/* SHA CONSTANTS */
+#define HASH_CON_VALUE 0x0700002C
+
+#define INPUT_ENDIAN_SWAP(input) deu_input_swap(input)
+#define DEU_ENDIAN_SWAP(input) deu_endian_swap(input)
+#define DELAY_PERIOD 10
+#define FIND_DEU_CHIP_VERSION chip_version()
+
+#define WAIT_AES_DMA_READY() \
+ do { \
+ int i; \
+ volatile struct deu_dma *dma = \
+ (struct deu_dma *) LQ_DEU_DMA_CON; \
+ volatile struct deu_aes *aes = \
+ (volatile struct deu_aes *) AES_START; \
+ for (i = 0; i < 10; i++) \
+ udelay(DELAY_PERIOD); \
+ while (dma->ctrl.BSY) {}; \
+ while (aes->ctrl.BUS) {}; \
+ } while (0)
+
+#define WAIT_DES_DMA_READY() \
+ do { \
+ int i; \
+ volatile struct deu_dma *dma = \
+ (struct deu_dma *) LQ_DEU_DMA_CON; \
+ volatile struct deu_des *des = \
+ (struct deu_des *) DES_3DES_START; \
+ for (i = 0; i < 10; i++) \
+ udelay(DELAY_PERIOD); \
+ while (dma->ctrl.BSY) {}; \
+ while (des->ctrl.BUS) {}; \
+ } while (0)
+
+#define AES_DMA_MISC_CONFIG() \
+ do { \
+ volatile struct deu_aes *aes = \
+ (volatile struct deu_aes *) AES_START; \
+ aes->ctrl.KRE = 1; \
+ aes->ctrl.GO = 1; \
+ } while(0)
+
+#define SHA_HASH_INIT \
+ do { \
+ volatile struct deu_hash *hash = \
+ (struct deu_hash *) HASH_START; \
+ hash->ctrl.SM = 1; \
+ hash->ctrl.ALGO = 0; \
+ hash->ctrl.INIT = 1; \
+ } while(0)
+
+/* DEU Common Structures for Falcon*/
+
+struct deu_clk_ctrl {
+ u32 Res:26;
+ u32 FSOE:1;
+ u32 SBWE:1;
+ u32 EDIS:1;
+ u32 SPEN:1;
+ u32 DISS:1;
+ u32 DISR:1;
+};
+
+struct deu_des {
+ struct deu_des_ctrl { /* 10h */
+ u32 KRE:1;
+ u32 reserved1:5;
+ u32 GO:1;
+ u32 STP:1;
+ u32 Res2:6;
+ u32 NDC:1;
+ u32 ENDI:1;
+ u32 Res3:2;
+ u32 F:3;
+ u32 O:3;
+ u32 BUS:1;
+ u32 DAU:1;
+ u32 ARS:1;
+ u32 SM:1;
+ u32 E_D:1;
+ u32 M:3;
+ } ctrl;
+
+ u32 IHR; /* 14h */
+ u32 ILR; /* 18h */
+ u32 K1HR; /* 1c */
+ u32 K1LR;
+ u32 K2HR;
+ u32 K2LR;
+ u32 K3HR;
+ u32 K3LR; /* 30h */
+ u32 IVHR; /* 34h */
+ u32 IVLR; /* 38 */
+ u32 OHR; /* 3c */
+ u32 OLR; /* 40 */
+};
+
+struct deu_aes {
+ struct deu_aes_ctrl {
+ u32 KRE:1;
+ u32 reserved1:4;
+ u32 PNK:1;
+ u32 GO:1;
+ u32 STP:1;
+ u32 reserved2:6;
+ u32 NDC:1;
+ u32 ENDI:1;
+ u32 reserved3:2;
+ u32 F:3; /* fbs */
+ u32 O:3; /* om */
+ u32 BUS:1; /* bsy */
+ u32 DAU:1;
+ u32 ARS:1;
+ u32 SM:1;
+ u32 E_D:1;
+ u32 KV:1;
+ u32 K:2; /* KL */
+ } ctrl;
+
+ u32 ID3R; /* 80h */
+ u32 ID2R; /* 84h */
+ u32 ID1R; /* 88h */
+ u32 ID0R; /* 8Ch */
+ u32 K7R; /* 90h */
+ u32 K6R; /* 94h */
+ u32 K5R; /* 98h */
+ u32 K4R; /* 9Ch */
+ u32 K3R; /* A0h */
+ u32 K2R; /* A4h */
+ u32 K1R; /* A8h */
+ u32 K0R; /* ACh */
+ u32 IV3R; /* B0h */
+ u32 IV2R; /* B4h */
+ u32 IV1R; /* B8h */
+ u32 IV0R; /* BCh */
+ u32 OD3R; /* D4h */
+ u32 OD2R; /* D8h */
+ u32 OD1R; /* DCh */
+ u32 OD0R; /* E0h */
+};
+
+struct deu_arc4 {
+ struct arc4_controlr {
+ u32 KRE:1;
+ u32 KLEN:4;
+ u32 KSAE:1;
+ u32 GO:1;
+ u32 STP:1;
+ u32 reserved1:6;
+ u32 NDC:1;
+ u32 ENDI:1;
+ u32 reserved2:8;
+ u32 BUS:1; /* bsy */
+ u32 reserved3:1;
+ u32 ARS:1;
+ u32 SM:1;
+ u32 reserved4:4;
+ } ctrl;
+
+ u32 K3R; /* 104h */
+ u32 K2R; /* 108h */
+ u32 K1R; /* 10Ch */
+ u32 K0R; /* 110h */
+ u32 IDLEN; /* 114h */
+ u32 ID3R; /* 118h */
+ u32 ID2R; /* 11Ch */
+ u32 ID1R; /* 120h */
+ u32 ID0R; /* 124h */
+ u32 OD3R; /* 128h */
+ u32 OD2R; /* 12Ch */
+ u32 OD1R; /* 130h */
+ u32 OD0R; /* 134h */
+};
+
+struct deu_hash {
+ struct deu_hash_ctrl {
+ u32 reserved1:5;
+ u32 KHS:1;
+ u32 GO:1;
+ u32 INIT:1;
+ u32 reserved2:6;
+ u32 NDC:1;
+ u32 ENDI:1;
+ u32 reserved3:7;
+ u32 DGRY:1;
+ u32 BSY:1;
+ u32 reserved4:1;
+ u32 IRCL:1;
+ u32 SM:1;
+ u32 KYUE:1;
+ u32 HMEN:1;
+ u32 SSEN:1;
+ u32 ALGO:1;
+ } ctrl;
+
+ u32 MR; /* B4h */
+ u32 D1R; /* B8h */
+ u32 D2R; /* BCh */
+ u32 D3R; /* C0h */
+ u32 D4R; /* C4h */
+ u32 D5R; /* C8h */
+ u32 dummy; /* CCh */
+ u32 KIDX; /* D0h */
+ u32 KEY; /* D4h */
+ u32 DBN; /* D8h */
+};
+
+struct deu_dma {
+ struct deu_dma_ctrl {
+ u32 reserved1:22;
+ u32 BS:2;
+ u32 BSY:1;
+ u32 reserved2:1;
+ u32 ALGO:2;
+ u32 RXCLS:2;
+ u32 reserved3:1;
+ u32 EN:1;
+ } ctrl;
+};
+
+#endif /* DEU_FALCON_H */
--- a/arch/mips/lantiq/xway/devices.h
+++ b/arch/mips/lantiq/xway/devices.h
@@ -24,5 +24,6 @@
extern void __init lq_register_ethernet(struct lq_eth_data *eth);
extern void __init lq_register_asc(int port);
extern void __init lq_register_gpio_buttons(struct gpio_button *buttons, int cnt);
+extern void __init lq_register_crypto(const char *name);
#endif
--- a/arch/mips/lantiq/xway/mach-easy50712.c
+++ b/arch/mips/lantiq/xway/mach-easy50712.c
@@ -74,6 +74,7 @@
lq_register_wdt();
lq_register_pci(&lq_pci_data);
lq_register_ethernet(&lq_eth_data);
+ lq_register_crypto("lq_danube_deu");
}
MIPS_MACHINE(LANTIQ_MACH_EASY50712,
--- a/arch/mips/lantiq/xway/mach-easy50812.c
+++ b/arch/mips/lantiq/xway/mach-easy50812.c
@@ -73,6 +73,7 @@
lq_register_wdt();
lq_register_pci(&lq_pci_data);
lq_register_ethernet(&lq_eth_data);
+ lq_register_crypto("lq_ar9_deu");
}
MIPS_MACHINE(LANTIQ_MACH_EASY50812,