961d5b4453
This uses a fixed phy instead of a dummy one. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39166
116 lines
4.1 KiB
Diff
116 lines
4.1 KiB
Diff
From d61941952d5e7d062c3884e6d81bd503a37702b4 Mon Sep 17 00:00:00 2001
|
|
From: Hauke Mehrtens <hauke@hauke-m.de>
|
|
Date: Fri, 20 Dec 2013 02:16:06 +0100
|
|
Subject: [PATCH 201/208] b44: check register instead of PHY address to detect
|
|
external PHY
|
|
|
|
The Ethernet core supported by b44 supports an internal PHY integrated
|
|
into the mac core, which is supported by the b44 driver and an external
|
|
PHY to which the mac core is connected. This external PHY could be a
|
|
switch connected through MII, which is often the case when this core is
|
|
used on home routers. The usage of an external PHY was assumed when the
|
|
PHY address 30 was used and an internal PHY was assumed when the PHY
|
|
address was different. To verify that b44_phy_reset() was called and
|
|
checked if it worked, otherwise PHY address 30 was assumed, an external
|
|
PHY. It is better to check the register which says which PHY is
|
|
connected to the MAC instead of checking the PHY address.
|
|
The interface to an external PHY was only activated when this register
|
|
was set.
|
|
|
|
This also changes B44_FLAG_INTERNAL_PHY to B44_FLAG_EXTERNAL_PHY, it is
|
|
easier to check.
|
|
|
|
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/ethernet/broadcom/b44.c | 18 +++++++++---------
|
|
drivers/net/ethernet/broadcom/b44.h | 2 +-
|
|
2 files changed, 10 insertions(+), 10 deletions(-)
|
|
|
|
--- a/drivers/net/ethernet/broadcom/b44.c
|
|
+++ b/drivers/net/ethernet/broadcom/b44.c
|
|
@@ -284,7 +284,7 @@ static int __b44_writephy(struct b44 *bp
|
|
|
|
static inline int b44_readphy(struct b44 *bp, int reg, u32 *val)
|
|
{
|
|
- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
|
|
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
|
|
return 0;
|
|
|
|
return __b44_readphy(bp, bp->phy_addr, reg, val);
|
|
@@ -292,7 +292,7 @@ static inline int b44_readphy(struct b44
|
|
|
|
static inline int b44_writephy(struct b44 *bp, int reg, u32 val)
|
|
{
|
|
- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
|
|
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
|
|
return 0;
|
|
|
|
return __b44_writephy(bp, bp->phy_addr, reg, val);
|
|
@@ -321,7 +321,7 @@ static int b44_phy_reset(struct b44 *bp)
|
|
u32 val;
|
|
int err;
|
|
|
|
- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
|
|
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
|
|
return 0;
|
|
err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
|
|
if (err)
|
|
@@ -423,7 +423,7 @@ static int b44_setup_phy(struct b44 *bp)
|
|
|
|
b44_wap54g10_workaround(bp);
|
|
|
|
- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
|
|
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY)
|
|
return 0;
|
|
if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
|
|
goto out;
|
|
@@ -521,7 +521,7 @@ static void b44_check_phy(struct b44 *bp
|
|
{
|
|
u32 bmsr, aux;
|
|
|
|
- if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) {
|
|
+ if (bp->flags & B44_FLAG_EXTERNAL_PHY) {
|
|
bp->flags |= B44_FLAG_100_BASE_T;
|
|
bp->flags |= B44_FLAG_FULL_DUPLEX;
|
|
if (!netif_carrier_ok(bp->dev)) {
|
|
@@ -1315,7 +1315,7 @@ static void b44_chip_reset(struct b44 *b
|
|
if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
|
|
bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL);
|
|
br32(bp, B44_ENET_CTRL);
|
|
- bp->flags &= ~B44_FLAG_INTERNAL_PHY;
|
|
+ bp->flags |= B44_FLAG_EXTERNAL_PHY;
|
|
} else {
|
|
u32 val = br32(bp, B44_DEVCTRL);
|
|
|
|
@@ -1324,7 +1324,7 @@ static void b44_chip_reset(struct b44 *b
|
|
br32(bp, B44_DEVCTRL);
|
|
udelay(100);
|
|
}
|
|
- bp->flags |= B44_FLAG_INTERNAL_PHY;
|
|
+ bp->flags &= ~B44_FLAG_EXTERNAL_PHY;
|
|
}
|
|
}
|
|
|
|
@@ -1828,8 +1828,8 @@ static int b44_get_settings(struct net_d
|
|
DUPLEX_FULL : DUPLEX_HALF;
|
|
cmd->port = 0;
|
|
cmd->phy_address = bp->phy_addr;
|
|
- cmd->transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ?
|
|
- XCVR_INTERNAL : XCVR_EXTERNAL;
|
|
+ cmd->transceiver = (bp->flags & B44_FLAG_EXTERNAL_PHY) ?
|
|
+ XCVR_EXTERNAL : XCVR_INTERNAL;
|
|
cmd->autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
|
|
AUTONEG_DISABLE : AUTONEG_ENABLE;
|
|
if (cmd->autoneg == AUTONEG_ENABLE)
|
|
--- a/drivers/net/ethernet/broadcom/b44.h
|
|
+++ b/drivers/net/ethernet/broadcom/b44.h
|
|
@@ -376,7 +376,7 @@ struct b44 {
|
|
#define B44_FLAG_ADV_10FULL 0x02000000
|
|
#define B44_FLAG_ADV_100HALF 0x04000000
|
|
#define B44_FLAG_ADV_100FULL 0x08000000
|
|
-#define B44_FLAG_INTERNAL_PHY 0x10000000
|
|
+#define B44_FLAG_EXTERNAL_PHY 0x10000000
|
|
#define B44_FLAG_RX_RING_HACK 0x20000000
|
|
#define B44_FLAG_TX_RING_HACK 0x40000000
|
|
#define B44_FLAG_WOL_ENABLE 0x80000000
|