openwrtv4/target/linux/ramips/dts/PSG1218.dts
Xuefu Lin dce5c4f5c8 ramips: Add support for Phicomm K2 PSG1218
- CPU: MT7620A 580MHz
- Flash: 8MB - RAM: 64MB
- External PA+LNA on both WLAN2.4 and WLAN5
- 4x LAN ethernet and 1x WAN ethernet

Signed-off-by: Xuefu Lin <xuefulin@gmail.com>
2016-10-04 11:50:46 +02:00

118 lines
1.8 KiB
Text

/dts-v1/;
#include "mt7620a.dtsi"
/ {
compatible = "PSG1218", "ralink,mt7620a-soc";
model = "Phicomm PSG1218";
gpio-leds {
compatible = "gpio-leds";
blue {
label = "psg1218:blue:status";
gpios = <&gpio0 10 0>;
};
yellow {
label = "psg1218:yellow:status";
gpios = <&gpio0 11 0>;
};
red {
label = "psg1218:red:status";
gpios = <&gpio0 8 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 1>;
linux,code = <0x198>;
};
};
};
&gpio0 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "en25q64";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@20000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@30000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
ralink,function = "gpio";
};
pa {
ralink,group = "pa";
ralink,function = "pa";
};
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x28>;
mediatek,portmap = "llllw";
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
mediatek,2ghz = <0>;
};
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};