openwrtv4/tools/firmware-utils/src/mkbrnimg.c
John Crispin cd1a204365 Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
2012-02-14 17:48:04 +00:00

183 lines
4.5 KiB
C

/*
* mkbrnimg.c - partially based on OpenWrt's wndr3700.c
*
* Copyright (C) 2011 Tobias Diedrich <ranma+openwrt@tdiedrich.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License,
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <stdio.h>
#include <stdlib.h>
#include <stddef.h>
#include <unistd.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <string.h>
#include <netinet/in.h>
#include <inttypes.h>
#define BPB 8 /* bits/byte */
static uint32_t crc32[1<<BPB];
static void init_crc32()
{
const uint32_t poly = ntohl(0x2083b8ed);
int n;
for (n = 0; n < 1<<BPB; n++) {
uint32_t crc = n;
int bit;
for (bit = 0; bit < BPB; bit++)
crc = (crc & 1) ? (poly ^ (crc >> 1)) : (crc >> 1);
crc32[n] = crc;
}
}
static uint32_t crc32buf(unsigned char *buf, size_t len)
{
uint32_t crc = 0xFFFFFFFF;
for (; len; len--, buf++)
crc = crc32[(uint8_t)crc ^ *buf] ^ (crc >> BPB);
return ~crc;
}
static void usage(const char *) __attribute__ (( __noreturn__ ));
static void usage(const char *mess)
{
fprintf(stderr, "Error: %s\n", mess);
fprintf(stderr, "Usage: mkbrnimg [-o output_file] [-m magic] [-s signature] kernel_file [additional files]\n");
fprintf(stderr, "\n");
exit(1);
}
static char *output_file = "default-brnImage";
static uint32_t magic = 0x12345678;
static char *signature = "BRNDTW502";
static void parseopts(int *argc, char ***argv)
{
char *endptr;
int res;
while ((res = getopt(*argc, *argv, "o:m:s:")) != -1) {
switch (res) {
default:
usage("Unknown option");
break;
case 'o':
output_file = optarg;
break;
case 'm':
magic = strtoul(optarg, &endptr, 0);
if (endptr == optarg || *endptr != 0)
usage("magic must be a decimal or hexadecimal 32-bit value");
break;
case 's':
signature = optarg;
break;
}
}
*argc -= optind;
*argv += optind;
}
static void appendfile(int outfd, char *path, int kernel) {
int fd;
size_t len, padded_len;
char *input_file;
uint32_t crc;
char padding[0x400];
char footer[12];
memset(padding, 0xff, sizeof(padding));
// mmap input_file
if ((fd = open(path, O_RDONLY)) < 0
|| (len = lseek(fd, 0, SEEK_END)) < 0
|| (input_file = mmap(0, len, PROT_READ, MAP_SHARED, fd, 0)) == (void *) (-1)
|| close(fd) < 0)
{
fprintf(stderr, "Error mapping file '%s': %s\n", path, strerror(errno));
exit(1);
}
// kernel should be lzma compressed image, not uImage
if (kernel &&
(input_file[0] != (char)0x5d ||
input_file[1] != (char)0x00 ||
input_file[2] != (char)0x00 ||
input_file[3] != (char)0x80)) {
fprintf(stderr, "lzma signature not found on kernel image.\n");
exit(1);
}
init_crc32();
crc = crc32buf(input_file, len);
fprintf(stderr, "crc32 for '%s' is %08x.\n", path, crc);
// write the file
write(outfd, input_file, len);
// write padding
padded_len = ((len + sizeof(footer) + sizeof(padding) - 1) & ~(sizeof(padding) - 1)) - sizeof(footer);
fprintf(stderr, "len=%08x padded_len=%08x\n", len, padded_len);
write(outfd, padding, padded_len - len);
// write footer
footer[0] = (len >> 0) & 0xff;
footer[1] = (len >> 8) & 0xff;
footer[2] = (len >> 16) & 0xff;
footer[3] = (len >> 24) & 0xff;
footer[4] = (magic >> 0) & 0xff;
footer[5] = (magic >> 8) & 0xff;
footer[6] = (magic >> 16) & 0xff;
footer[7] = (magic >> 24) & 0xff;
footer[8] = (crc >> 0) & 0xff;
footer[9] = (crc >> 8) & 0xff;
footer[10] = (crc >> 16) & 0xff;
footer[11] = (crc >> 24) & 0xff;
write(outfd, footer, sizeof(footer));
munmap(input_file, len);
}
int main(int argc, char **argv)
{
int outfd;
int i;
parseopts(&argc, &argv);
if (argc < 1)
usage("wrong number of arguments");
if ((outfd = open(output_file, O_WRONLY|O_CREAT|O_TRUNC, 0644)) == -1)
{
fprintf(stderr, "Error opening '%s' for writing: %s\n", output_file, strerror(errno));
exit(1);
}
for (i=0; i<argc; i++) {
appendfile(outfd, argv[i], i == 0);
}
write(outfd, signature, strlen(signature)+1);
close(outfd);
return 0;
}