openwrtv4/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
John Crispin 3760b95702 ramips: add support for Dovado tiny AC
Add support for Dovado tiny AC wifi router.

Soc: mt7620a
ram: 64MB
flash: 8MB
1x usb 2.0
two gigabit lan ports

5ghz wlan is not supported on this board since there is no gpl driverfor mt7610e wifi chip.

Signed-off-by: Andrej Vlasic <andrej.vlasic0@gmail.com>

SVN-Revision: 47348
2015-11-02 10:17:51 +00:00

67 lines
1.3 KiB
Bash

#!/bin/sh
rt2x00_eeprom_die() {
echo "rt2x00 eeprom: " "$*"
exit 1
}
rt2x00_eeprom_extract() {
local part=$1
local offset=$2
local count=$3
local mtd
. /lib/functions.sh
mtd=$(find_mtd_part $part)
[ -n "$mtd" ] || \
rt2x00_eeprom_die "no mtd device found for partition $part"
dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
rt2x00_eeprom_die "failed to extract from $mtd"
}
rt2x00_eeprom_set_macaddr() {
local macaddr=$1
[ -n "$macaddr" ] || \
rt2x00_eeprom_die "invalid wlan mac address"
macaddr_2bin $macaddr | dd of=/lib/firmware/$FIRMWARE \
conv=notrunc bs=1 seek=4 count=6 2>/dev/null || \
rt2x00_eeprom_die "failed to write mac address to eeprom file"
}
FW="/lib/firmware/$FIRMWARE"
[ -e "$FW" ] && exit 0
. /lib/ramips.sh
. /lib/functions/system.sh
board=$(ramips_board_name)
case "$FIRMWARE" in
"soc_wmac.eeprom")
case $board in
*)
rt2x00_eeprom_die "Please define mtd-eeprom in $board DTS file!"
;;
esac
;;
"rt2x00pci_1_0.eeprom")
case $board in
cy-swr1100)
rt2x00_eeprom_extract "factory" 8192 512
;;
br-6475nd | rt-n56u | whr-600d | whr-1166d)
rt2x00_eeprom_extract "factory" 32768 512
;;
tiny-ac)
local wifi_mac=$(mtd_get_mac_ascii u-boot-env INIC_MAC_ADDR)
rt2x00_eeprom_extract "factory" 0 512
rt2x00_eeprom_set_macaddr $wifi_mac
;;
esac
;;
esac