openwrtv4/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4519PW.dts
Mathias Kresin d8b475212b lantiq: kernel 4.14: use vbus-supply devicetree property
It isn't a phy supply, as the phy is still up if the GPIO is low. It
rather is the supply for the vbus. A correct setting/definition will be
relevant as soon as USB peripheral mode is supported.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-05-17 07:40:19 +02:00

202 lines
3.6 KiB
Text

/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv4519pw", "lantiq,xway", "lantiq,danube";
model = "Vodafone Netfaster IAD 2, Pirelli P.RG A4201G";
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
led-internet = &internet_green;
led-usb = &led_usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "arv4519pw:green:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power2 {
label = "arv4519pw:red:power";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv4519pw:green:wlan";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "arv4519pw:green:dsl";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
internet_green: online {
label = "arv4519pw:green:internet";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
online2 {
label = "arv4519pw:red:internet";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
led_usb: usb {
label = "arv4519pw:green:usb";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
voip {
label = "arv4519pw:green:voip";
gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
};
fxs1 {
label = "arv4519pw:green:phone1";
gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
};
fxs2 {
label = "arv4519pw:green:phone2";
gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
};
fxo {
label = "arv4519pw:green:line";
gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
};
wps2 {
label = "arv4519pw:green:wps";
gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
};
wps {
label = "arv4519pw:orange:wps";
gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
};
wps3 {
label = "arv4519pw:red:wps";
gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
};
};
usb_vbus: regulator-usb-vbus {
compatible = "regulator-fixed";
regulator-name = "USB_VBUS";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&gpio {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ebu {
lantiq,groups = "ebu cs1";
lantiq,function = "ebu";
};
};
};
&gpiomm {
status = "okay";
lantiq,shadow = <0x400>;
};
&gsw {
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
&localbus {
nor@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
boardconfig: partition@3f0000 {
label = "boardconfig";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
};
&pci0 {
status = "okay";
lantiq,external-clock;
gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
req-mask = <0xf>;
};
&usb_phy {
status = "okay";
};
&usb {
status = "okay";
vbus-supply = <&usb_vbus>;
};
&vmmc {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
};