André Valentin a0ed7af6c6 ipq806x/nbg6817: add support for ZyXEL NBG6817 ... CPU: 2x1.8GHz ARM, RAM: 512MiB Storage: 4MiB serial Flash, 3.9GiB MMC NIC: 2x1GBit/s, Switch with 5 external and 2 internal ports WiFi: Dualband, ath10k 2.4GHz, 5GHz MU-MIMO For installation copy xx-mmcblk0p4-kernel.bin and xx-mmcblk0p5-rootfs-full.bin to device. Then run: cat xx-mmcblk0p4-kernel.bin > /dev/mmc0blk0p4 cat xx-mmcblk0p5-rootfs-full.bin > /dev/mmc0blk0p5 reboot -f For debugging serial console is easily visible on board, no soldering needed. Signed-off-by: André Valentin <avalentin@marcant.net>		2016-10-26 12:37:46 +02:00
..
base-files	ipq806x/nbg6817: add support for ZyXEL NBG6817	2016-10-26 12:37:46 +02:00
files/arch/arm/boot/dts	ipq806x/nbg6817: add support for ZyXEL NBG6817	2016-10-26 12:37:46 +02:00
image	ipq806x/nbg6817: add support for ZyXEL NBG6817	2016-10-26 12:37:46 +02:00
patches-4.4	ipq806x/nbg6817: add support for ZyXEL NBG6817	2016-10-26 12:37:46 +02:00
profiles	ipq806x: enable ath10k firmware for 988x, 99x0 and 9984 by default	2016-07-04 11:41:32 +02:00
config-4.4	ipq806x/nbg6817: add support for ZyXEL NBG6817	2016-10-26 12:37:46 +02:00
Makefile	switch to the new usbport LED trigger	2016-10-19 12:09:45 +02:00
modules.mk	ipq806x: sync with latest patches sent by QCA	2016-08-18 09:49:18 +02:00