d6f187f938
YunCore T830 is a simple N300 router with 5-port FE switch, detachable antennas and USB 2.0 port. Specification: - 650/597/216 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet - 2T2R 2.4 GHz (QCA9531), with ext. PA (SKY65174-21) and LNA - two external, detachable antennas (RP-SMA) - 1x USB 2.0 - 8x LED (7 driven by GPIO) - 1x button (reset) - DC jack for main power input (12 V) - UART and JTAG headers on PCB Flash instruction: 1. First, gain root access to the device, following below steps: - Login into web gui (default password/IP: admin/192.168.188.253). - Go to "Advanced" -> "Management" -> "System" and download backup of configuration (bakfile.bin). - Open the file as tar.gz archive, edit/update "shadow" file and change hash of root password to something known. - Repack the archive, rename it back to "bakfile.bin" and use to restore configuration of the device. - After that, device will reboot and can be accessed over SSH. 2. Then, install OpenWrt: - Login over SSH and issue command: fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000" - Upload "sysupgrade" image and install it (only if previous command succeeded) with command: "sysupgrade -n -F openwrt-...". Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> |
||
---|---|---|
.. | ||
adm5120 | ||
adm8668 | ||
apm821xx | ||
ar7 | ||
ar71xx | ||
arc770 | ||
archs38 | ||
armvirt | ||
at91 | ||
ath25 | ||
au1000 | ||
bcm53xx | ||
brcm47xx | ||
brcm63xx | ||
brcm2708 | ||
cns3xxx | ||
gemini | ||
generic | ||
imx6 | ||
ipq806x | ||
ixp4xx | ||
kirkwood | ||
lantiq | ||
layerscape | ||
malta | ||
mcs814x | ||
mediatek | ||
mpc85xx | ||
mvebu | ||
mxs | ||
octeon | ||
octeontx | ||
omap | ||
omap24xx | ||
orion | ||
oxnas | ||
pistachio | ||
ppc40x | ||
ppc44x | ||
ramips | ||
rb532 | ||
sunxi | ||
uml | ||
x86 | ||
xburst | ||
zynq | ||
Makefile |