openwrtv4/target/linux/layerscape/patches-4.4/8115-PCI-layerscape-call-dw_pcie_setup_rc-in-host-initial.patch
Yutang Jiang 15a14cf166 layerscape: add 64b/32b target for ls1012ardb device
The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00

30 lines
1.1 KiB
Diff

From 5d661761fd2354e4f976c83143a1bf7c1ecad766 Mon Sep 17 00:00:00 2001
From: Yangbo Lu <yangbo.lu@nxp.com>
Date: Tue, 20 Sep 2016 16:07:10 +0800
Subject: [PATCH 115/115] PCI: layerscape: call dw_pcie_setup_rc() in host
initialization
A previous patch moved some Root Complex programming from
dw_pcie_host_init() to dw_pcie_setup_rc() where it belongs,
while the pci-layerscape driver didn't call dw_pcie_setup_rc()
anywhere after that. This patch is to add dw_pcie_setup_rc()
calling in layerscape host initialization to fix ls1012a pci
issue caused by that patch.
Fixes: c49b76f3c613("PCI: designware: Move Root Complex setup
code to dw_pcie_setup_rc()")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
---
drivers/pci/host/pci-layerscape.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pci/host/pci-layerscape.c
+++ b/drivers/pci/host/pci-layerscape.c
@@ -148,6 +148,7 @@ static void ls_pcie_host_init(struct pci
{
struct ls_pcie *pcie = to_ls_pcie(pp);
+ dw_pcie_setup_rc(pp);
iowrite32(1, pcie->dbi + PCIE_DBI_RO_WR_EN);
ls_pcie_fix_class(pcie);
ls_pcie_clear_multifunction(pcie);