openwrtv4/target/linux/layerscape/patches-4.4/0059-PCI-designware-Remove-incorrect-RC-memory-base-limit.patch
Yutang Jiang c6c731fe31 layerscape: add 64b/32b target for ls1043ardb device
Add support for NXP layerscape ls1043ardb 64b/32b Dev board.

LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores.
ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC,
I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc.

64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from
NXP QorIQ SDK release.

All of 4.4 kernel patches porting from SDK release or upstream.

QorIQ SDK ISOs can be downloaded from this location:
http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00

45 lines
1.6 KiB
Diff

From ae717a9744a3e18f2ed0a6aa44e279c89ad5052c Mon Sep 17 00:00:00 2001
From: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Date: Sat, 16 Apr 2016 12:03:39 +0100
Subject: [PATCH 59/70] PCI: designware: Remove incorrect RC memory base/limit
configuration
Currently dw_pcie_setup_rc() configures memory base and memory limit in the
type1 configuration header for the root complex. In doing so it uses the
CPU address (pp->mem_base) rather than the bus address (pp->mem_bus_addr).
This is wrong and it is useless since the configuration is overwritten
later on when pci_bus_assign_resources() is called.
Remove this configuration from dw_pcie_setup_rc().
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
---
drivers/pci/host/pcie-designware.c | 8 --------
1 file changed, 8 deletions(-)
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -708,8 +708,6 @@ static struct pci_ops dw_pcie_ops = {
void dw_pcie_setup_rc(struct pcie_port *pp)
{
u32 val;
- u32 membase;
- u32 memlimit;
/* set the number of lanes */
dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val);
@@ -768,12 +766,6 @@ void dw_pcie_setup_rc(struct pcie_port *
val |= 0x00010100;
dw_pcie_writel_rc(pp, val, PCI_PRIMARY_BUS);
- /* setup memory base, memory limit */
- membase = ((u32)pp->mem_base & 0xfff00000) >> 16;
- memlimit = (pp->mem_size + (u32)pp->mem_base) & 0xfff00000;
- val = memlimit | membase;
- dw_pcie_writel_rc(pp, val, PCI_MEMORY_BASE);
-
/* setup command register */
dw_pcie_readl_rc(pp, PCI_COMMAND, &val);
val &= 0xffff0000;