No description
d692a2340c
Since client mode in mac80211is unreliable without using wpa_supplicant, it would be better to enable wpa_supplicant by default. With this patch, wpa_supplicant will always be used for mac80211-based drivers in client mode. This will break client mode for images that don't include wpa_supplicant or wpad, so maybe I need to add a check somewhere to see if wpa_supplicant is available, and show the user a warning if he tries client mode without wpa_supplicant. Suggestions on where to add this check are welcome. Tested with ath5k in client mode on open and wpa2-psk network, and tested on my ath9k based AP as well to make sure it doesn't break AP mode. SVN-Revision: 19718 |
||
---|---|---|
docs | ||
include | ||
package | ||
scripts | ||
target | ||
toolchain | ||
tools | ||
.gitignore | ||
BSDmakefile | ||
Config.in | ||
feeds.conf.default | ||
LICENSE | ||
Makefile | ||
README | ||
rules.mk |
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, bison, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org