openwrtv4/package/kernel/linux/modules/other.mk
Felix Fietkau e2bf2b2c4d kernel: omap_wdt module load typo
autoload should be without .ko module extension

Signed-off-by: Ulrich Weber <uw@ocedo.com>

SVN-Revision: 47395
2015-11-06 10:53:19 +00:00

971 lines
25 KiB
Makefile

#
# Copyright (C) 2006-2015 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
OTHER_MENU:=Other modules
WATCHDOG_DIR:=watchdog
define KernelPackage/6lowpan
SUBMENU:=$(OTHER_MENU)
TITLE:=6LoWPAN shared code
KCONFIG:= \
CONFIG_6LOWPAN \
CONFIG_6LOWPAN_NHC=n
FILES:=$(LINUX_DIR)/net/6lowpan/6lowpan.ko
AUTOLOAD:=$(call AutoProbe,6lowpan)
endef
define KernelPackage/6lowpan/description
Shared 6lowpan code for IEEE 802.15.4 and Bluetooth.
endef
$(eval $(call KernelPackage,6lowpan))
define KernelPackage/bluetooth
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth support
DEPENDS:=@USB_SUPPORT +kmod-usb-core +kmod-crypto-hash +kmod-crypto-ecb +kmod-lib-crc16 +kmod-hid +!LINUX_3_18:kmod-crypto-cmac
KCONFIG:= \
CONFIG_BLUEZ \
CONFIG_BLUEZ_L2CAP \
CONFIG_BLUEZ_SCO \
CONFIG_BLUEZ_RFCOMM \
CONFIG_BLUEZ_BNEP \
CONFIG_BLUEZ_HCIUART \
CONFIG_BLUEZ_HCIUSB \
CONFIG_BLUEZ_HIDP \
CONFIG_BT \
CONFIG_BT_BREDR=y \
CONFIG_BT_DEBUGFS=n \
CONFIG_BT_L2CAP=y \
CONFIG_BT_LE=y \
CONFIG_BT_SCO=y \
CONFIG_BT_RFCOMM \
CONFIG_BT_BNEP \
CONFIG_BT_HCIBTUSB \
CONFIG_BT_HCIBTUSB_BCM=n \
CONFIG_BT_HCIUSB \
CONFIG_BT_HCIUART \
CONFIG_BT_HCIUART_BCM=n \
CONFIG_BT_HCIUART_INTEL=n \
CONFIG_BT_HCIUART_H4 \
CONFIG_BT_HIDP \
CONFIG_HID_SUPPORT=y
$(call AddDepends/rfkill)
FILES:= \
$(LINUX_DIR)/net/bluetooth/bluetooth.ko \
$(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.ko \
$(LINUX_DIR)/net/bluetooth/bnep/bnep.ko \
$(LINUX_DIR)/net/bluetooth/hidp/hidp.ko \
$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
$(LINUX_DIR)/drivers/bluetooth/btusb.ko
ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,4.1.0)),1)
FILES+= \
$(LINUX_DIR)/drivers/bluetooth/btintel.ko
endif
AUTOLOAD:=$(call AutoProbe,bluetooth rfcomm bnep hidp hci_uart btusb)
endef
define KernelPackage/bluetooth/description
Kernel support for Bluetooth devices
endef
$(eval $(call KernelPackage,bluetooth))
define KernelPackage/ath3k
SUBMENU:=$(OTHER_MENU)
TITLE:=ATH3K Kernel Module support
DEPENDS:=+kmod-bluetooth +ar3k-firmware
KCONFIG:= \
CONFIG_BT_ATH3K \
CONFIG_BT_HCIUART_ATH3K=y
$(call AddDepends/bluetooth)
FILES:= \
$(LINUX_DIR)/drivers/bluetooth/ath3k.ko
AUTOLOAD:=$(call AutoProbe,ath3k)
endef
define KernelPackage/ath3k/description
Kernel support for ATH3K Module
endef
$(eval $(call KernelPackage,ath3k))
define KernelPackage/bluetooth_6lowpan
SUBMENU:=$(OTHER_MENU)
TITLE:=Bluetooth 6LoWPAN support
DEPENDS:=+kmod-6lowpan +kmod-bluetooth
KCONFIG:=CONFIG_BT_6LOWPAN
FILES:=$(LINUX_DIR)/net/bluetooth/bluetooth_6lowpan.ko
AUTOLOAD:=$(call AutoProbe,bluetooth_6lowpan)
endef
define KernelPackage/bluetooth_6lowpan/description
Kernel support for 6LoWPAN over Bluetooth Low Energy devices
endef
$(eval $(call KernelPackage,bluetooth_6lowpan))
define KernelPackage/bluetooth-hci-h4p
SUBMENU:=$(OTHER_MENU)
TITLE:=HCI driver with H4 Nokia extensions
DEPENDS:=@TARGET_omap24xx +kmod-bluetooth
KCONFIG:=CONFIG_BT_HCIH4P
FILES:=$(LINUX_DIR)/drivers/bluetooth/hci_h4p/hci_h4p.ko
AUTOLOAD:=$(call AutoProbe,hci_h4p)
endef
define KernelPackage/bluetooth-hci-h4p/description
HCI driver with H4 Nokia extensions
endef
$(eval $(call KernelPackage,bluetooth-hci-h4p))
define KernelPackage/eeprom-93cx6
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM 93CX6 support
KCONFIG:=CONFIG_EEPROM_93CX6
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/eeprom_93cx6.ko
AUTOLOAD:=$(call AutoLoad,20,eeprom_93cx6)
endef
define KernelPackage/eeprom-93cx6/description
Kernel module for EEPROM 93CX6 support
endef
$(eval $(call KernelPackage,eeprom-93cx6))
define KernelPackage/eeprom-at24
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT24 support
KCONFIG:=CONFIG_EEPROM_AT24
DEPENDS:=+kmod-i2c-core
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at24.ko
AUTOLOAD:=$(call AutoProbe,at24)
endef
define KernelPackage/eeprom-at24/description
Kernel module for most I2C EEPROMs
endef
$(eval $(call KernelPackage,eeprom-at24))
define KernelPackage/eeprom-at25
SUBMENU:=$(OTHER_MENU)
TITLE:=EEPROM AT25 support
KCONFIG:=CONFIG_EEPROM_AT25
FILES:=$(LINUX_DIR)/drivers/misc/eeprom/at25.ko
AUTOLOAD:=$(call AutoProbe,at25)
endef
define KernelPackage/eeprom-at25/description
Kernel module for most SPI EEPROMs
endef
$(eval $(call KernelPackage,eeprom-at25))
define KernelPackage/gpio-dev
SUBMENU:=$(OTHER_MENU)
TITLE:=Generic GPIO char device support
DEPENDS:=@GPIO_SUPPORT
KCONFIG:=CONFIG_GPIO_DEVICE
FILES:=$(LINUX_DIR)/drivers/char/gpio_dev.ko
AUTOLOAD:=$(call AutoLoad,40,gpio_dev)
endef
define KernelPackage/gpio-dev/description
Kernel module to allows control of GPIO pins using a character device.
endef
$(eval $(call KernelPackage,gpio-dev))
define KernelPackage/gpio-mcp23s08
SUBMENU:=$(OTHER_MENU)
TITLE:=Microchip MCP23xxx I/O expander
DEPENDS:=@GPIO_SUPPORT +PACKAGE_kmod-i2c-core:kmod-i2c-core
KCONFIG:=CONFIG_GPIO_MCP23S08
FILES:=$(LINUX_DIR)/drivers/gpio/gpio-mcp23s08.ko
AUTOLOAD:=$(call AutoLoad,40,gpio-mcp23s08)
endef
define KernelPackage/gpio-mcp23s08/description
Kernel module for Microchip MCP23xxx SPI/I2C I/O expander
endef
$(eval $(call KernelPackage,gpio-mcp23s08))
define KernelPackage/gpio-nxp-74hc164
SUBMENU:=$(OTHER_MENU)
TITLE:=NXP 74HC164 GPIO expander support
KCONFIG:=CONFIG_GPIO_NXP_74HC164
FILES:=$(LINUX_DIR)/drivers/gpio/nxp_74hc164.ko
AUTOLOAD:=$(call AutoProbe,nxp_74hc164)
endef
define KernelPackage/gpio-nxp-74hc164/description
Kernel module for NXP 74HC164 GPIO expander
endef
$(eval $(call KernelPackage,gpio-nxp-74hc164))
define KernelPackage/gpio-pca953x
SUBMENU:=$(OTHER_MENU)
DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
TITLE:=PCA95xx, TCA64xx, and MAX7310 I/O ports
KCONFIG:=CONFIG_GPIO_PCA953X
FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pca953x.ko
AUTOLOAD:=$(call AutoLoad,55,gpio-pca953x)
endef
define KernelPackage/gpio-pca953x/description
Kernel module for MAX731{0,2,3,5}, PCA6107, PCA953{4-9}, PCA955{4-7},
PCA957{4,5} and TCA64{08,16} I2C GPIO expanders
endef
$(eval $(call KernelPackage,gpio-pca953x))
define KernelPackage/gpio-pcf857x
SUBMENU:=$(OTHER_MENU)
DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
TITLE:=PCX857x, PCA967x and MAX732X I2C GPIO expanders
KCONFIG:=CONFIG_GPIO_PCF857X
FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pcf857x.ko
AUTOLOAD:=$(call AutoLoad,55,gpio-pcf857x)
endef
define KernelPackage/gpio-pcf857x/description
Kernel module for PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders
endef
$(eval $(call KernelPackage,gpio-pcf857x))
define KernelPackage/iio-core
SUBMENU:=$(OTHER_MENU)
TITLE:=Industrial IO core
KCONFIG:= \
CONFIG_IIO \
CONFIG_IIO_BUFFER=y \
CONFIG_IIO_KFIFO_BUF \
CONFIG_IIO_TRIGGER=y \
CONFIG_IIO_TRIGGERED_BUFFER
FILES:= \
$(LINUX_DIR)/drivers/iio/industrialio.ko \
$(if $(CONFIG_IIO_TRIGGERED_BUFFER),$(LINUX_DIR)/drivers/iio/industrialio-triggered-buffer.ko) \
$(LINUX_DIR)/drivers/iio/kfifo_buf.ko
AUTOLOAD:=$(call AutoLoad,55,industrialio kfifo_buf industrialio-triggered-buffer)
endef
define KernelPackage/iio-core/description
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
number of different physical interfaces (i2c, spi, etc)
endef
$(eval $(call KernelPackage,iio-core))
define KernelPackage/iio-ad799x
SUBMENU:=$(OTHER_MENU)
DEPENDS:=kmod-i2c-core kmod-iio-core
TITLE:=Analog Devices AD799x ADC driver
KCONFIG:= \
CONFIG_AD799X_RING_BUFFER=y \
CONFIG_AD799X
FILES:=$(LINUX_DIR)/drivers/iio/adc/ad799x.ko
AUTOLOAD:=$(call AutoLoad,56,ad799x)
endef
define KernelPackage/iio-ad799x/description
support for Analog Devices:
ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
i2c analog to digital converters (ADC).
endef
$(eval $(call KernelPackage,iio-ad799x))
define KernelPackage/iio-dht11
SUBMENU:=$(OTHER_MENU)
DEPENDS:=kmod-iio-core @GPIO_SUPPORT @USES_DEVICETREE
TITLE:=DHT11 (and compatible) humidity and temperature sensors
KCONFIG:= \
CONFIG_DHT11
FILES:=$(LINUX_DIR)/drivers/iio/humidity/dht11.ko
AUTOLOAD:=$(call AutoLoad,56,dht11)
endef
define KernelPackage/iio-dht11/description
support for DHT11 and DHT22 digitial humidity and temperature sensors
attached at GPIO lines. You will need a custom device tree file to
specify the GPIO line to use.
endef
$(eval $(call KernelPackage,iio-dht11))
define KernelPackage/lp
SUBMENU:=$(OTHER_MENU)
TITLE:=Parallel port and line printer support
KCONFIG:= \
CONFIG_PARPORT \
CONFIG_PRINTER \
CONFIG_PPDEV
FILES:= \
$(LINUX_DIR)/drivers/parport/parport.ko \
$(LINUX_DIR)/drivers/char/lp.ko \
$(LINUX_DIR)/drivers/char/ppdev.ko
AUTOLOAD:=$(call AutoLoad,50,parport lp ppdev)
endef
$(eval $(call KernelPackage,lp))
define KernelPackage/mmc
SUBMENU:=$(OTHER_MENU)
TITLE:=MMC/SD Card Support
KCONFIG:= \
CONFIG_MMC \
CONFIG_MMC_BLOCK \
CONFIG_MMC_DEBUG=n \
CONFIG_MMC_UNSAFE_RESUME=n \
CONFIG_MMC_BLOCK_BOUNCE=y \
CONFIG_MMC_TIFM_SD=n \
CONFIG_MMC_WBSD=n \
CONFIG_SDIO_UART=n
FILES:= \
$(LINUX_DIR)/drivers/mmc/core/mmc_core.ko \
$(LINUX_DIR)/drivers/mmc/card/mmc_block.ko
AUTOLOAD:=$(call AutoProbe,mmc_core mmc_block,1)
endef
define KernelPackage/mmc/description
Kernel support for MMC/SD cards
endef
$(eval $(call KernelPackage,mmc))
define KernelPackage/sdhci
SUBMENU:=$(OTHER_MENU)
TITLE:=Secure Digital Host Controller Interface support
DEPENDS:=+kmod-mmc
KCONFIG:= \
CONFIG_MMC_SDHCI \
CONFIG_MMC_SDHCI_PLTFM \
CONFIG_MMC_SDHCI_PCI=n
FILES:= \
$(LINUX_DIR)/drivers/mmc/host/sdhci.ko \
$(LINUX_DIR)/drivers/mmc/host/sdhci-pltfm.ko
AUTOLOAD:=$(call AutoProbe,sdhci sdhci-pltfm,1)
endef
define KernelPackage/sdhci/description
Kernel support for SDHCI Hosts
endef
$(eval $(call KernelPackage,sdhci))
define KernelPackage/rfkill
SUBMENU:=$(OTHER_MENU)
TITLE:=RF switch subsystem support
DEPENDS:=@USE_RFKILL +kmod-input-core
KCONFIG:= \
CONFIG_RFKILL \
CONFIG_RFKILL_INPUT=y \
CONFIG_RFKILL_LEDS=y \
CONFIG_RFKILL_GPIO=y
FILES:= \
$(LINUX_DIR)/net/rfkill/rfkill.ko
AUTOLOAD:=$(call AutoLoad,20,rfkill)
endef
define KernelPackage/rfkill/description
Say Y here if you want to have control over RF switches
found on many WiFi and Bluetooth cards
endef
$(eval $(call KernelPackage,rfkill))
define KernelPackage/softdog
SUBMENU:=$(OTHER_MENU)
TITLE:=Software watchdog driver
KCONFIG:=CONFIG_SOFT_WATCHDOG
FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/softdog.ko
AUTOLOAD:=$(call AutoLoad,50,softdog,1)
endef
define KernelPackage/softdog/description
Software watchdog driver
endef
$(eval $(call KernelPackage,softdog))
define KernelPackage/ssb
SUBMENU:=$(OTHER_MENU)
TITLE:=Silicon Sonics Backplane glue code
DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_brcm63xx
KCONFIG:=\
CONFIG_SSB \
CONFIG_SSB_B43_PCI_BRIDGE=y \
CONFIG_SSB_DRIVER_MIPS=n \
CONFIG_SSB_DRIVER_PCICORE=y \
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
CONFIG_SSB_PCIHOST=y \
CONFIG_SSB_PCIHOST_POSSIBLE=y \
CONFIG_SSB_POSSIBLE=y \
CONFIG_SSB_SPROM=y \
CONFIG_SSB_SILENT=y
FILES:=$(LINUX_DIR)/drivers/ssb/ssb.ko
AUTOLOAD:=$(call AutoLoad,18,ssb,1)
endef
define KernelPackage/ssb/description
Silicon Sonics Backplane glue code.
endef
$(eval $(call KernelPackage,ssb))
define KernelPackage/bcma
SUBMENU:=$(OTHER_MENU)
TITLE:=BCMA support
DEPENDS:=@PCI_SUPPORT @!TARGET_brcm47xx @!TARGET_bcm53xx
KCONFIG:=\
CONFIG_BCMA \
CONFIG_BCMA_POSSIBLE=y \
CONFIG_BCMA_BLOCKIO=y \
CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
CONFIG_BCMA_HOST_PCI=y \
CONFIG_BCMA_HOST_SOC=n \
CONFIG_BCMA_DRIVER_MIPS=n \
CONFIG_BCMA_DRIVER_PCI_HOSTMODE=n \
CONFIG_BCMA_DRIVER_GMAC_CMN=n \
CONFIG_BCMA_DEBUG=n
FILES:=$(LINUX_DIR)/drivers/bcma/bcma.ko
AUTOLOAD:=$(call AutoLoad,29,bcma)
endef
define KernelPackage/bcma/description
Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture
endef
$(eval $(call KernelPackage,bcma))
define KernelPackage/wdt-omap
SUBMENU:=$(OTHER_MENU)
TITLE:=OMAP Watchdog timer
DEPENDS:=@(TARGET_omap24xx||TARGET_omap35xx)
KCONFIG:=CONFIG_OMAP_WATCHDOG
FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/omap_wdt.ko
AUTOLOAD:=$(call AutoLoad,50,omap_wdt,1)
endef
define KernelPackage/wdt-omap/description
Kernel module for TI omap watchdog timer
endef
$(eval $(call KernelPackage,wdt-omap))
define KernelPackage/wdt-orion
SUBMENU:=$(OTHER_MENU)
TITLE:=Marvell Orion Watchdog timer
DEPENDS:=@TARGET_orion||TARGET_kirkwood||TARGET_mvebu
KCONFIG:=CONFIG_ORION_WATCHDOG
FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/orion_wdt.ko
AUTOLOAD:=$(call AutoLoad,50,orion_wdt,1)
endef
define KernelPackage/wdt-orion/description
Kernel module for Marvell Orion, Kirkwood and Armada XP/370 watchdog timer
endef
$(eval $(call KernelPackage,wdt-orion))
define KernelPackage/booke-wdt
SUBMENU:=$(OTHER_MENU)
TITLE:=PowerPC Book-E Watchdog Timer
DEPENDS:=@(TARGET_mpc85xx||TARGET_ppc40x||TARGET_ppc44x)
KCONFIG:=CONFIG_BOOKE_WDT
FILES:=$(LINUX_DIR)/drivers/$(WATCHDOG_DIR)/booke_wdt.ko
AUTOLOAD:=$(call AutoLoad,50,booke_wdt,1)
endef
define KernelPackage/booke-wdt/description
Kernel module for PowerPC Book-E Watchdog Timer
endef
$(eval $(call KernelPackage,booke-wdt))
define KernelPackage/rtc-ds1307
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1307 (and compatible) RTC support
DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_DS1307
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1307.ko
AUTOLOAD:=$(call AutoProbe,rtc-ds1307)
endef
define KernelPackage/rtc-ds1307/description
Kernel module for Dallas/Maxim DS1307/DS1337/DS1338/DS1340/DS1388/DS3231,
Epson RX-8025 and various other compatible RTC chips connected via I2C.
endef
$(eval $(call KernelPackage,rtc-ds1307))
define KernelPackage/rtc-ds1672
SUBMENU:=$(OTHER_MENU)
TITLE:=Dallas/Maxim DS1672 RTC support
DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_DS1672
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-ds1672.ko
AUTOLOAD:=$(call AutoProbe,rtc-ds1672)
endef
define KernelPackage/rtc-ds1672/description
Kernel module for Dallas/Maxim DS1672 RTC.
endef
$(eval $(call KernelPackage,rtc-ds1672))
define KernelPackage/rtc-isl1208
SUBMENU:=$(OTHER_MENU)
TITLE:=Intersil ISL1208 RTC support
DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_ISL1208
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-isl1208.ko
AUTOLOAD:=$(call AutoProbe,rtc-isl1208)
endef
define KernelPackage/rtc-isl1208/description
Kernel module for Intersil ISL1208 RTC.
endef
$(eval $(call KernelPackage,rtc-isl1208))
define KernelPackage/rtc-marvell
SUBMENU:=$(OTHER_MENU)
TITLE:=Marvell SoC built-in RTC support
DEPENDS:=@RTC_SUPPORT @TARGET_kirkwood||TARGET_orion||TARGET_mvebu
KCONFIG:=CONFIG_RTC_DRV_MV
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko
AUTOLOAD:=$(call AutoProbe,rtc-mv)
endef
define KernelPackage/rtc-marvell/description
Kernel module for Marvell SoC built-in RTC.
endef
$(eval $(call KernelPackage,rtc-marvell))
define KernelPackage/rtc-armada38x
SUBMENU:=$(OTHER_MENU)
TITLE:=Marvell Armada 38x SoC built-in RTC support
DEPENDS:=@RTC_SUPPORT @TARGET_mvebu
KCONFIG:=CONFIG_RTC_DRV_ARMADA38X
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-armada38x.ko
AUTOLOAD:=$(call AutoProbe,rtc-armada38x)
endef
define KernelPackage/rtc-armada38x/description
Kernel module for Marvell Armada 38x SoC built-in RTC.
endef
$(eval $(call KernelPackage,rtc-armada38x))
define KernelPackage/rtc-pcf8563
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF8563/Epson RTC8564 RTC support
DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_PCF8563
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf8563.ko
AUTOLOAD:=$(call AutoProbe,rtc-pcf8563)
endef
define KernelPackage/rtc-pcf8563/description
Kernel module for Philips PCF8563 RTC chip.
The Epson RTC8564 should work as well.
endef
$(eval $(call KernelPackage,rtc-pcf8563))
define KernelPackage/rtc-pcf2123
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF2123 RTC support
DEPENDS:=@RTC_SUPPORT
KCONFIG:=CONFIG_RTC_DRV_PCF2123
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pcf2123.ko
AUTOLOAD:=$(call AutoProbe,rtc-pcf2123)
endef
define KernelPackage/rtc-pcf2123/description
Kernel module for Philips PCF2123 RTC chip
endef
$(eval $(call KernelPackage,rtc-pcf2123))
define KernelPackage/rtc-pt7c4338
SUBMENU:=$(OTHER_MENU)
TITLE:=Pericom PT7C4338 RTC support
DEPENDS:=@RTC_SUPPORT +kmod-i2c-core
KCONFIG:=CONFIG_RTC_DRV_PT7C4338
FILES:=$(LINUX_DIR)/drivers/rtc/rtc-pt7c4338.ko
AUTOLOAD:=$(call AutoProbe,rtc-pt7c4338)
endef
define KernelPackage/rtc-pt7c4338/description
Kernel module for Pericom PT7C4338 i2c RTC chip
endef
$(eval $(call KernelPackage,rtc-pt7c4338))
define KernelPackage/mtdtests
SUBMENU:=$(OTHER_MENU)
TITLE:=MTD subsystem tests
KCONFIG:=CONFIG_MTD_TESTS
FILES:=\
$(LINUX_DIR)/drivers/mtd/tests/mtd_nandecctest.ko \
$(LINUX_DIR)/drivers/mtd/tests/mtd_oobtest.ko \
$(LINUX_DIR)/drivers/mtd/tests/mtd_pagetest.ko \
$(LINUX_DIR)/drivers/mtd/tests/mtd_readtest.ko \
$(LINUX_DIR)/drivers/mtd/tests/mtd_speedtest.ko \
$(LINUX_DIR)/drivers/mtd/tests/mtd_stresstest.ko \
$(LINUX_DIR)/drivers/mtd/tests/mtd_subpagetest.ko \
$(LINUX_DIR)/drivers/mtd/tests/mtd_torturetest.ko
endef
define KernelPackage/mtdtests/description
Kernel modules for MTD subsystem/driver testing
endef
$(eval $(call KernelPackage,mtdtests))
define KernelPackage/serial-8250
SUBMENU:=$(OTHER_MENU)
TITLE:=8250 UARTs
KCONFIG:= CONFIG_SERIAL_8250 \
CONFIG_SERIAL_8250_NR_UARTS=16 \
CONFIG_SERIAL_8250_RUNTIME_UARTS=16 \
CONFIG_SERIAL_8250_EXTENDED=y \
CONFIG_SERIAL_8250_MANY_PORTS=y \
CONFIG_SERIAL_8250_SHARE_IRQ=y \
CONFIG_SERIAL_8250_DETECT_IRQ=n \
CONFIG_SERIAL_8250_RSA=n
FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250.ko
endef
define KernelPackage/serial-8250/description
Kernel module for 8250 UART based serial ports
endef
$(eval $(call KernelPackage,serial-8250))
define KernelPackage/regmap
SUBMENU:=$(OTHER_MENU)
TITLE:=Generic register map support
DEPENDS:=+kmod-lib-lzo +kmod-i2c-core
KCONFIG:=CONFIG_REGMAP \
CONFIG_REGMAP_MMIO \
CONFIG_REGMAP_SPI \
CONFIG_REGMAP_I2C \
CONFIG_SPI=y
FILES:= \
$(LINUX_DIR)/drivers/base/regmap/regmap-core.ko \
$(LINUX_DIR)/drivers/base/regmap/regmap-i2c.ko \
$(LINUX_DIR)/drivers/base/regmap/regmap-mmio.ko \
$(if $(CONFIG_SPI),$(LINUX_DIR)/drivers/base/regmap/regmap-spi.ko)
AUTOLOAD:=$(call AutoLoad,21,regmap-core regmap-i2c regmap-mmio regmap-spi)
endef
define KernelPackage/regmap/description
Generic register map support
endef
$(eval $(call KernelPackage,regmap))
define KernelPackage/ikconfig
SUBMENU:=$(OTHER_MENU)
TITLE:=Kernel configuration via /proc/config.gz
KCONFIG:=CONFIG_IKCONFIG \
CONFIG_IKCONFIG_PROC=y
FILES:=$(LINUX_DIR)/kernel/configs.ko
AUTOLOAD:=$(call AutoLoad,70,configs)
endef
define KernelPackage/ikconfig/description
Kernel configuration via /proc/config.gz
endef
$(eval $(call KernelPackage,ikconfig))
define KernelPackage/zram
SUBMENU:=$(OTHER_MENU)
TITLE:=ZRAM
DEPENDS:=+kmod-lib-lzo +kmod-lib-lz4
KCONFIG:= \
CONFIG_ZSMALLOC \
CONFIG_ZRAM \
CONFIG_ZRAM_DEBUG=n \
CONFIG_PGTABLE_MAPPING=n \
CONFIG_ZSMALLOC_STAT=n \
CONFIG_ZRAM_LZ4_COMPRESS=y
FILES:= \
$(LINUX_DIR)/mm/zsmalloc.ko \
$(LINUX_DIR)/drivers/block/zram/zram.ko
AUTOLOAD:=$(call AutoLoad,20,zsmalloc zram)
endef
define KernelPackage/zram/description
Compressed RAM block device support
endef
$(eval $(call KernelPackage,zram))
define KernelPackage/mvsdio
SUBMENU:=$(OTHER_MENU)
TITLE:=Marvell SDIO support
DEPENDS:=@TARGET_orion||TARGET_kirkwood||TARGET_mvebu +kmod-mmc
KCONFIG:=CONFIG_MMC_MVSDIO
FILES:=$(LINUX_DIR)/drivers/mmc/host/mvsdio.ko
AUTOLOAD:=$(call AutoProbe,mvsdio)
endef
define KernelPackage/mvsdio/description
Kernel support for the Marvell SDIO controller
endef
$(eval $(call KernelPackage,mvsdio))
define KernelPackage/pps
SUBMENU:=$(OTHER_MENU)
TITLE:=PPS support
KCONFIG:=CONFIG_PPS
FILES:=$(LINUX_DIR)/drivers/pps/pps_core.ko
AUTOLOAD:=$(call AutoLoad,17,pps_core,1)
endef
define KernelPackage/pps/description
PPS (Pulse Per Second) is a special pulse provided by some GPS
antennae. Userland can use it to get a high-precision time
reference.
endef
$(eval $(call KernelPackage,pps))
define KernelPackage/pps-gpio
SUBMENU:=$(OTHER_MENU)
TITLE:=PPS client using GPIO
DEPENDS:=+kmod-pps
KCONFIG:=CONFIG_PPS_CLIENT_GPIO
FILES:=$(LINUX_DIR)/drivers/pps/clients/pps-gpio.ko
AUTOLOAD:=$(call AutoLoad,18,pps-gpio,1)
endef
define KernelPackage/pps-gpio/description
Support for a PPS source using GPIO. To be useful you must
also register a platform device specifying the GPIO pin and
other options, usually in your board setup.
endef
$(eval $(call KernelPackage,pps-gpio))
define KernelPackage/ptp
SUBMENU:=$(OTHER_MENU)
TITLE:=PTP clock support
DEPENDS:=+kmod-pps
KCONFIG:=CONFIG_PTP_1588_CLOCK
FILES:=$(LINUX_DIR)/drivers/ptp/ptp.ko
AUTOLOAD:=$(call AutoLoad,18,ptp,1)
endef
define KernelPackage/ptp/description
The IEEE 1588 standard defines a method to precisely
synchronize distributed clocks over Ethernet networks.
endef
$(eval $(call KernelPackage,ptp))
define KernelPackage/ptp-gianfar
SUBMENU:=$(OTHER_MENU)
TITLE:=Freescale Gianfar PTP support
DEPENDS:=@TARGET_mpc85xx +kmod-gianfar +kmod-ptp
KCONFIG:=CONFIG_PTP_1588_CLOCK_GIANFAR
FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/gianfar_ptp.ko
AUTOLOAD:=$(call AutoProbe,gianfar_ptp)
endef
define KernelPackage/ptp-gianfar/description
Kernel module for IEEE 1588 support for Freescale
Gianfar Ethernet drivers
endef
$(eval $(call KernelPackage,ptp-gianfar))
define KernelPackage/random-core
SUBMENU:=$(OTHER_MENU)
TITLE:=Hardware Random Number Generator Core support
KCONFIG:=CONFIG_HW_RANDOM
FILES:=$(LINUX_DIR)/drivers/char/hw_random/rng-core.ko
endef
define KernelPackage/random-core/description
Kernel module for the HW random number generator core infrastructure
endef
$(eval $(call KernelPackage,random-core))
define KernelPackage/thermal
SUBMENU:=$(OTHER_MENU)
TITLE:=Generic Thermal sysfs driver
DEPENDS:=+kmod-hwmon-core
HIDDEN:=1
KCONFIG:= \
CONFIG_THERMAL \
CONFIG_THERMAL_OF=y \
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y \
CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE=n \
CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE=n \
CONFIG_THERMAL_GOV_FAIR_SHARE=n \
CONFIG_THERMAL_GOV_STEP_WISE=y \
CONFIG_THERMAL_GOV_USER_SPACE=n \
CONFIG_THERMAL_HWMON=y \
CONFIG_THERMAL_EMULATION=n
FILES:=$(LINUX_DIR)/drivers/thermal/thermal_sys.ko
AUTOLOAD:=$(call AutoProbe,thermal_sys)
endef
define KernelPackage/thermal/description
Generic Thermal Sysfs driver offers a generic mechanism for thermal
management. Usually it's made up of one or more thermal zone and cooling
device.
endef
$(eval $(call KernelPackage,thermal))
define KernelPackage/thermal-armada
SUBMENU:=$(OTHER_MENU)
TITLE:=Armada 370/XP thermal management
DEPENDS:=@TARGET_mvebu +kmod-thermal
KCONFIG:=CONFIG_ARMADA_THERMAL
FILES:=$(LINUX_DIR)/drivers/thermal/armada_thermal.ko
AUTOLOAD:=$(call AutoProbe,armada_thermal)
endef
define KernelPackage/thermal-armada/description
Enable this module if you want to have support for thermal management
controller present in Armada 370 and Armada XP SoC.
endef
$(eval $(call KernelPackage,thermal-armada))
define KernelPackage/thermal-imx
SUBMENU:=$(OTHER_MENU)
TITLE:=Temperature sensor driver for Freescale i.MX SoCs
DEPENDS:=@TARGET_imx6 +kmod-thermal
KCONFIG:= \
CONFIG_CPU_THERMAL=y \
CONFIG_IMX_THERMAL
FILES:=$(LINUX_DIR)/drivers/thermal/imx_thermal.ko
AUTOLOAD:=$(call AutoProbe,imx_thermal)
endef
define KernelPackage/thermal-imx/description
Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs.
It supports one critical trip point and one passive trip point. The
cpufreq is used as the cooling device to throttle CPUs when the
passive trip is crossed.
endef
$(eval $(call KernelPackage,thermal-imx))
define KernelPackage/thermal-kirkwood
SUBMENU:=$(OTHER_MENU)
TITLE:=Temperature sensor on Marvell Kirkwood SoCs
DEPENDS:=@TARGET_kirkwood +kmod-thermal
KCONFIG:=CONFIG_KIRKWOOD_THERMAL
FILES:=$(LINUX_DIR)/drivers/thermal/kirkwood_thermal.ko
AUTOLOAD:=$(call AutoProbe,kirkwood_thermal)
endef
define KernelPackage/thermal-kirkwood/description
Support for the Kirkwood thermal sensor driver into the Linux thermal
framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
endef
$(eval $(call KernelPackage,thermal-kirkwood))
define KernelPackage/gpio-beeper
SUBMENU:=$(OTHER_MENU)
TITLE:=GPIO beeper support
DEPENDS:=+kmod-input-core
KCONFIG:= \
CONFIG_INPUT_MISC=y \
CONFIG_INPUT_GPIO_BEEPER
FILES:= \
$(LINUX_DIR)/drivers/input/misc/gpio-beeper.ko
AUTOLOAD:=$(call AutoLoad,50,gpio-beeper)
endef
define KernelPackage/gpio-beeper/description
This enables playing beeps through an GPIO-connected buzzer
endef
$(eval $(call KernelPackage,gpio-beeper))
define KernelPackage/echo
SUBMENU:=$(OTHER_MENU)
TITLE:=Line Echo Canceller
KCONFIG:=CONFIG_ECHO
FILES:=$(LINUX_DIR)/drivers/misc/echo/echo.ko
AUTOLOAD:=$(call AutoLoad,50,echo)
endef
define KernelPackage/echo/description
This driver provides line echo cancelling support for mISDN and
DAHDI drivers
endef
$(eval $(call KernelPackage,echo))