406 lines
9.2 KiB
C
406 lines
9.2 KiB
C
/*
|
|
* (C) Copyright 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2010
|
|
* Thomas Langer, Ralph Hempel
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <netdev.h>
|
|
#include <miiphy.h>
|
|
#include <asm/addrspace.h>
|
|
#include <asm/danube.h>
|
|
#include <asm/reboot.h>
|
|
#include <asm/io.h>
|
|
#if defined(CONFIG_CMD_HTTPD)
|
|
#include <httpd.h>
|
|
#endif
|
|
#if defined(CONFIG_PCI)
|
|
#include <pci.h>
|
|
#endif
|
|
#if defined(CONFIG_AR8216_SWITCH)
|
|
#include "athrs26_phy.h"
|
|
#endif
|
|
|
|
extern ulong ifx_get_ddr_hz(void);
|
|
extern ulong ifx_get_cpuclk(void);
|
|
|
|
/* IDs and registers of known external switches */
|
|
void _machine_restart(void)
|
|
{
|
|
*DANUBE_RCU_RST_REQ |=1<<30;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_RAMBOOT
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
return get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM);
|
|
}
|
|
#elif defined(CONFIG_USE_DDR_RAM)
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
return (CONFIG_SYS_MAX_RAM);
|
|
}
|
|
#else
|
|
|
|
static ulong max_sdram_size(void) /* per Chip Select */
|
|
{
|
|
/* The only supported SDRAM data width is 16bit.
|
|
*/
|
|
#define CFG_DW 4
|
|
|
|
/* The only supported number of SDRAM banks is 4.
|
|
*/
|
|
#define CFG_NB 4
|
|
|
|
ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0;
|
|
int cols = cfgpb0 & 0xF;
|
|
int rows = (cfgpb0 & 0xF0) >> 4;
|
|
ulong size = (1 << (rows + cols)) * CFG_DW * CFG_NB;
|
|
|
|
return size;
|
|
}
|
|
|
|
/*
|
|
* Check memory range for valid RAM. A simple memory test determines
|
|
* the actually available RAM size between addresses `base' and
|
|
* `base + maxsize'.
|
|
*/
|
|
|
|
static long int dram_size(long int *base, long int maxsize)
|
|
{
|
|
volatile long int *addr;
|
|
ulong cnt, val;
|
|
ulong save[32]; /* to make test non-destructive */
|
|
unsigned char i = 0;
|
|
|
|
for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
|
|
addr = base + cnt; /* pointer arith! */
|
|
|
|
save[i++] = *addr;
|
|
*addr = ~cnt;
|
|
}
|
|
|
|
/* write 0 to base address */
|
|
addr = base;
|
|
save[i] = *addr;
|
|
*addr = 0;
|
|
|
|
/* check at base address */
|
|
if ((val = *addr) != 0) {
|
|
*addr = save[i];
|
|
return (0);
|
|
}
|
|
|
|
for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
|
|
addr = base + cnt; /* pointer arith! */
|
|
|
|
val = *addr;
|
|
*addr = save[--i];
|
|
|
|
if (val != (~cnt)) {
|
|
return (cnt * sizeof (long));
|
|
}
|
|
}
|
|
return (maxsize);
|
|
}
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
int rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0;
|
|
ulong size, max_size = 0;
|
|
ulong our_address;
|
|
|
|
/* load t9 into our_address */
|
|
asm volatile ("move %0, $25" : "=r" (our_address) :);
|
|
|
|
/* Can't probe for RAM size unless we are running from Flash.
|
|
* find out whether running from DRAM or Flash.
|
|
*/
|
|
if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1))
|
|
{
|
|
return max_sdram_size();
|
|
}
|
|
|
|
for (cols = 0x8; cols <= 0xC; cols++)
|
|
{
|
|
for (rows = 0xB; rows <= 0xD; rows++)
|
|
{
|
|
*DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) |
|
|
(rows << 4) | cols;
|
|
size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
|
|
max_sdram_size());
|
|
|
|
if (size > max_size)
|
|
{
|
|
best_val = *DANUBE_SDRAM_MC_CFGPB0;
|
|
max_size = size;
|
|
}
|
|
}
|
|
}
|
|
|
|
*DANUBE_SDRAM_MC_CFGPB0 = best_val;
|
|
return max_size;
|
|
}
|
|
#endif
|
|
|
|
static void gpio_default(void)
|
|
{
|
|
#ifdef CONFIG_SWITCH_PORT0
|
|
*DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P0_OD |= (1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P0_DIR |= (1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P0_OUT |= (1<<CONFIG_SWITCH_PIN);
|
|
#elif defined(CONFIG_SWITCH_PORT1)
|
|
*DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P1_OD |= (1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P1_DIR |= (1<<CONFIG_SWITCH_PIN);
|
|
*DANUBE_GPIO_P1_OUT |= (1<<CONFIG_SWITCH_PIN);
|
|
#endif
|
|
#ifdef CONFIG_EBU_GPIO
|
|
{
|
|
int i = 0;
|
|
printf ("bring up ebu gpio\n");
|
|
*DANUBE_EBU_BUSCON1 = 0x1e7ff;
|
|
*DANUBE_EBU_ADDSEL1 = 0x14000001;
|
|
|
|
*((volatile u16*)0xb4000000) = 0x0;
|
|
for(i = 0; i < 1000; i++)
|
|
udelay(1000);
|
|
*((volatile u16*)0xb4000000) = CONFIG_EBU_GPIO;
|
|
*DANUBE_EBU_BUSCON1 = 0x8001e7ff;
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_BUTTON_PORT0
|
|
*DANUBE_GPIO_P0_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN);
|
|
*DANUBE_GPIO_P0_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN);
|
|
*DANUBE_GPIO_P0_DIR &= ~(1<<CONFIG_BUTTON_PIN);
|
|
if(!!(*DANUBE_GPIO_P0_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL)
|
|
{
|
|
printf("button is pressed\n");
|
|
setenv("bootdelay", "0");
|
|
setenv("bootcmd", "httpd");
|
|
}
|
|
#elif defined(CONFIG_BUTTON_PORT1)
|
|
*DANUBE_GPIO_P1_ALTSEL0 &= ~(1<<CONFIG_BUTTON_PIN);
|
|
*DANUBE_GPIO_P1_ALTSEL1 &= ~(1<<CONFIG_BUTTON_PIN);
|
|
*DANUBE_GPIO_P1_DIR &= ~(1<<CONFIG_BUTTON_PIN);
|
|
if(!!(*DANUBE_GPIO_P1_IN & (1<<CONFIG_BUTTON_PIN)) == CONFIG_BUTTON_LEVEL)
|
|
{
|
|
printf("button is pressed\n");
|
|
setenv("bootdelay", "0");
|
|
setenv("bootcmd", "httpd");
|
|
}
|
|
#endif
|
|
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
unsigned long chipid = *DANUBE_MPS_CHIPID;
|
|
int part_num;
|
|
|
|
puts ("Board: "CONFIG_ARCADYAN"\n");
|
|
puts ("SoC: ");
|
|
|
|
part_num = DANUBE_MPS_CHIPID_PARTNUM_GET(chipid);
|
|
switch (part_num)
|
|
{
|
|
case 0x129:
|
|
case 0x12D:
|
|
case 0x12b:
|
|
puts("Danube/Twinpass/Vinax-VE ");
|
|
break;
|
|
default:
|
|
printf ("unknown, chip part number 0x%03X ", part_num);
|
|
break;
|
|
}
|
|
printf ("V1.%ld, ", DANUBE_MPS_CHIPID_VERSION_GET(chipid));
|
|
|
|
printf("DDR Speed %ld MHz, ", ifx_get_ddr_hz()/1000000);
|
|
printf("CPU Speed %ld MHz\n", ifx_get_cpuclk()/1000000);
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SKIP_LOWLEVEL_INIT
|
|
int board_early_init_f(void)
|
|
{
|
|
#ifdef CONFIG_EBU_ADDSEL0
|
|
(*DANUBE_EBU_ADDSEL0) = CONFIG_EBU_ADDSEL0;
|
|
#endif
|
|
#ifdef CONFIG_EBU_ADDSEL1
|
|
(*DANUBE_EBU_ADDSEL1) = CONFIG_EBU_ADDSEL1;
|
|
#endif
|
|
#ifdef CONFIG_EBU_ADDSEL2
|
|
(*DANUBE_EBU_ADDSEL2) = CONFIG_EBU_ADDSEL2;
|
|
#endif
|
|
#ifdef CONFIG_EBU_ADDSEL3
|
|
(*DANUBE_EBU_ADDSEL3) = CONFIG_EBU_ADDSEL3;
|
|
#endif
|
|
#ifdef CONFIG_EBU_BUSCON0
|
|
(*DANUBE_EBU_BUSCON0) = CONFIG_EBU_BUSCON0;
|
|
#endif
|
|
#ifdef CONFIG_EBU_BUSCON1
|
|
(*DANUBE_EBU_BUSCON1) = CONFIG_EBU_BUSCON1;
|
|
#endif
|
|
#ifdef CONFIG_EBU_BUSCON2
|
|
(*DANUBE_EBU_BUSCON2) = CONFIG_EBU_BUSCON2;
|
|
#endif
|
|
#ifdef CONFIG_EBU_BUSCON3
|
|
(*DANUBE_EBU_BUSCON3) = CONFIG_EBU_BUSCON3;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
|
|
|
|
#ifdef CONFIG_RTL8306_SWITCH
|
|
#define ID_RTL8306 0x5988
|
|
static int external_switch_rtl8306(void)
|
|
{
|
|
unsigned short chipid;
|
|
static char * const name = "lq_cpe_eth";
|
|
|
|
udelay(100000);
|
|
|
|
puts("\nsearching for rtl8306 switch ... ");
|
|
if (miiphy_read(name, 4, 30, &chipid) == 0) {
|
|
if (chipid == ID_RTL8306) {
|
|
puts("found");
|
|
/* set led mode */
|
|
miiphy_write(name, 0, 19, 0xffff);
|
|
/* magic */
|
|
miiphy_write(name, 4, 22, 0x877f);
|
|
puts("\n");
|
|
return 0;
|
|
}
|
|
puts("failed\n");
|
|
}
|
|
puts("\nno known switch found ... \n");
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_AR8216_SWITCH
|
|
static int external_switch_ar8216(void)
|
|
{
|
|
puts("initializing ar8216 switch... ");
|
|
if (athrs26_phy_setup(0)==0) {
|
|
printf("initialized\n");
|
|
return 0;
|
|
}
|
|
puts("failed ... \n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
gpio_default();
|
|
|
|
#if defined(CONFIG_IFX_ETOP)
|
|
uchar enetaddr[6];
|
|
if (!eth_getenv_enetaddr("ethaddr", enetaddr))
|
|
eth_setenv_enetaddr("ethaddr", (uchar *)0xb03f0016);
|
|
|
|
*DANUBE_PMU_PWDCR &= 0xFFFFEFDF;
|
|
*DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
|
|
|
|
if (lq_eth_initialize(bis))
|
|
return -1;
|
|
|
|
*DANUBE_RCU_RST_REQ |=1;
|
|
udelay(200000);
|
|
*DANUBE_RCU_RST_REQ &=(unsigned long)~1;
|
|
udelay(1000);
|
|
|
|
#ifdef CONFIG_RTL8306_SWITCH
|
|
if (external_switch_rtl8306()<0)
|
|
return -1;
|
|
#endif
|
|
#ifdef CONFIG_AR8216_SWITCH
|
|
if (external_switch_ar8216()<0)
|
|
return -1;
|
|
#endif
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_HTTPD)
|
|
int do_http_upgrade(const unsigned char *data, const ulong size)
|
|
{
|
|
char buf[128];
|
|
|
|
if(getenv ("ram_addr") == NULL)
|
|
return -1;
|
|
if(getenv ("kernel_addr") == NULL)
|
|
return -1;
|
|
/* check the image */
|
|
if(run_command("imi ${ram_addr}", 0) < 0) {
|
|
return -1;
|
|
}
|
|
/* write the image to the flash */
|
|
puts("http ugrade ...\n");
|
|
sprintf(buf, "era ${kernel_addr} +0x%lx; cp.b ${ram_addr} ${kernel_addr} 0x%lx", size, size);
|
|
return run_command(buf, 0);
|
|
}
|
|
|
|
int do_http_progress(const int state)
|
|
{
|
|
/* toggle LED's here */
|
|
switch(state) {
|
|
case HTTP_PROGRESS_START:
|
|
puts("http start\n");
|
|
break;
|
|
case HTTP_PROGRESS_TIMEOUT:
|
|
puts(".");
|
|
break;
|
|
case HTTP_PROGRESS_UPLOAD_READY:
|
|
puts("http upload ready\n");
|
|
break;
|
|
case HTTP_PROGRESS_UGRADE_READY:
|
|
puts("http ugrade ready\n");
|
|
break;
|
|
case HTTP_PROGRESS_UGRADE_FAILED:
|
|
puts("http ugrade failed\n");
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
unsigned long do_http_tmp_address(void)
|
|
{
|
|
char *s = getenv ("ram_addr");
|
|
if (s) {
|
|
ulong tmp = simple_strtoul (s, NULL, 16);
|
|
return tmp;
|
|
}
|
|
return 0 /*0x80a00000*/;
|
|
}
|
|
|
|
#endif
|