Gabor Juhos f7cc3d576c swconfig: Add cpu port index to help output. ... Let swconfig provide the cpu port index in its help page. This is needed as e.g. Atheros switches have their cpu port at port 0, not port 5. This could allow e.g. luci to get a rough overview of the layout of the switch. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> SVN-Revision: 20939		2010-04-16 19:32:40 +00:00
..
adm6996.c	fix link status detection in various switch drivers	2009-12-08 14:06:09 +00:00
adm6996.h	Add stub driver for ADM6996F switches (configured through MII) The driver currently uses a hardcoded VLAN mapping and has no configuration yet Tested on Accton MR3202a	2008-04-20 02:53:04 +00:00
ar8216.c	Generic: Clean up output of AR8216 driver.	2010-04-10 11:34:11 +00:00
ar8216.h	Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.	2010-04-05 23:03:16 +00:00
ip175c.c	enable IP175A support in the IP175C PHY driver (based on patch from jh in #6733)	2010-03-28 18:57:42 +00:00
mvswitch.c	fix link status detection in various switch drivers	2009-12-08 14:06:09 +00:00
mvswitch.h	add missing defines for mvswitch	2008-07-21 18:12:38 +00:00
rtl8306.c	rtl8306: manage the wan port as a separate phy device with proper link status reading and autonegotiation - the genphy driver does not handle it properly	2009-12-09 03:25:33 +00:00
rtl8366_smi.c	rtl8366_smi: sanitize gpio values to a 0/1 boolean	2010-01-30 15:25:12 +00:00
rtl8366_smi.h	rtl8366: make it available on all platforms	2010-01-25 15:13:38 +00:00
rtl8366rb.c	kernel: add driver for the RTL8366RB switch	2010-02-24 13:39:02 +00:00
rtl8366s.c	rtl8366s: reset the chip early, this allows ethernet to work as soon as possible	2010-01-27 21:01:48 +00:00
swconfig.c	swconfig: Add cpu port index to help output.	2010-04-16 19:32:40 +00:00