openwrtv4/target/linux/ipq806x/patches-4.4/709-spi-qup-Fix-fifo-and-dma-support-for-IPQ806x.patch
Hauke Mehrtens 84d489f64f kernel: update to version 4.4.14
Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14

Some manual changes to target/linux/generic/patches-4.4/610-
netfilter_match_bypass_default_checks.patch were needed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-26 18:20:37 +02:00

129 lines
3.5 KiB
Diff

From 16d2871830ff3fe12a6bff582549a9264adff278 Mon Sep 17 00:00:00 2001
From: Ram Chandra Jangir <rjangi@codeaurora.org>
Date: Tue, 10 May 2016 20:19:31 +0530
Subject: [PATCH] spi: qup: Fix fifo and dma support for IPQ806x
Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
---
drivers/spi/spi-qup.c | 54 +++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 52 insertions(+), 2 deletions(-)
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -24,6 +24,7 @@
#include <linux/spi/spi.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
#define QUP_CONFIG 0x0000
#define QUP_STATE 0x0004
@@ -152,6 +153,7 @@ struct spi_qup {
int use_dma;
struct dma_slave_config rx_conf;
struct dma_slave_config tx_conf;
+ int mode;
};
@@ -370,7 +372,8 @@ static int spi_qup_do_pio(struct spi_mas
return ret;
}
- spi_qup_fifo_write(qup, xfer);
+ if (qup->mode == QUP_IO_M_MODE_FIFO)
+ spi_qup_fifo_write(qup, xfer);
return 0;
}
@@ -448,6 +451,7 @@ spi_qup_get_mode(struct spi_master *mast
{
struct spi_qup *qup = spi_master_get_devdata(master);
u32 mode;
+ size_t dma_align = dma_get_cache_alignment();
qup->w_size = 4;
@@ -458,6 +462,14 @@ spi_qup_get_mode(struct spi_master *mast
qup->n_words = xfer->len / qup->w_size;
+ if (!IS_ERR_OR_NULL(master->dma_rx) &&
+ IS_ALIGNED((size_t)xfer->tx_buf, dma_align) &&
+ IS_ALIGNED((size_t)xfer->rx_buf, dma_align) &&
+ !is_vmalloc_addr(xfer->tx_buf) &&
+ !is_vmalloc_addr(xfer->rx_buf) &&
+ (xfer->len > 3*qup->in_blk_sz))
+ qup->use_dma = 1;
+
if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32)))
mode = QUP_IO_M_MODE_FIFO;
else
@@ -491,7 +503,7 @@ static int spi_qup_io_config(struct spi_
return -EIO;
}
- mode = spi_qup_get_mode(spi->master, xfer);
+ controller->mode = mode = spi_qup_get_mode(spi->master, xfer);
n_words = controller->n_words;
if (mode == QUP_IO_M_MODE_FIFO) {
@@ -500,6 +512,7 @@ static int spi_qup_io_config(struct spi_
/* must be zero for FIFO */
writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
+ controller->use_dma = 0;
} else if (!controller->use_dma) {
writel_relaxed(n_words, controller->base + QUP_MX_INPUT_CNT);
writel_relaxed(n_words, controller->base + QUP_MX_OUTPUT_CNT);
@@ -750,6 +763,38 @@ err_tx:
return ret;
}
+static void spi_qup_set_cs(struct spi_device *spi, bool val)
+{
+ struct spi_qup *controller;
+ u32 spi_ioc;
+ u32 spi_ioc_orig;
+
+ controller = spi_master_get_devdata(spi->master);
+ spi_ioc = readl_relaxed(controller->base + SPI_IO_CONTROL);
+ spi_ioc_orig = spi_ioc;
+ if (!val)
+ spi_ioc |= SPI_IO_C_FORCE_CS;
+ else
+ spi_ioc &= ~SPI_IO_C_FORCE_CS;
+
+ if (spi_ioc != spi_ioc_orig)
+ writel_relaxed(spi_ioc, controller->base + SPI_IO_CONTROL);
+}
+
+static int spi_qup_setup(struct spi_device *spi)
+{
+ if (spi->cs_gpio >= 0) {
+ if (spi->mode & SPI_CS_HIGH)
+ gpio_set_value(spi->cs_gpio, 0);
+ else
+ gpio_set_value(spi->cs_gpio, 1);
+
+ udelay(10);
+ }
+
+ return 0;
+}
+
static int spi_qup_probe(struct platform_device *pdev)
{
struct spi_master *master;
@@ -846,6 +891,11 @@ static int spi_qup_probe(struct platform
if (of_device_is_compatible(dev->of_node, "qcom,spi-qup-v1.1.1"))
controller->qup_v1 = 1;
+ if (!controller->qup_v1)
+ master->set_cs = spi_qup_set_cs;
+ else
+ master->setup = spi_qup_setup;
+
spin_lock_init(&controller->lock);
init_completion(&controller->done);