KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ipq806x/patches-4.4/400-dsa-add-qca.patch
Hauke Mehrtens 84d489f64f kernel: update to version 4.4.14 
Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14

Some manual changes to target/linux/generic/patches-4.4/610-
netfilter_match_bypass_default_checks.patch were needed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-26 18:20:37 +02:00

1068 lines
29 KiB
Diff
Raw Blame History

From patchwork Fri May 29 01:42:16 2015
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [1/7] net: dsa: add new driver for ar8xxx family
From: Mathieu Olivari <mathieu@codeaurora.org>
X-Patchwork-Id: 477523
X-Patchwork-Delegate: davem@davemloft.net
Message-Id: <1432863742-18427-2-git-send-email-mathieu@codeaurora.org>
To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
davem@davemloft.net, mathieu@codeaurora.org, andrew@lunn.ch,
f.fainelli@gmail.com, linux@roeck-us.net, gang.chen.5i5j@gmail.com,
jiri@resnulli.us, leitec@staticky.com, fabf@skynet.be,
alexander.h.duyck@intel.com, pavel.nakonechny@skitlab.ru,
joe@perches.com, sfeldma@gmail.com, nbd@nbd.name, juhosg@openwrt.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org
Date: Thu, 28 May 2015 18:42:16 -0700
This patch contains initial init & registration code for QCA8337. It
will detect a QCA8337 switch, if present and declared in DT/platform.
Each port will be represented through a standalone net_device interface,
as for other DSA switches. CPU can communicate with any of the ports by
setting an IP@ on ethN interface. Ports cannot communicate with each
other just yet.
Link status will be reported through polling, and we don't use any
encapsulation.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
drivers/net/dsa/Kconfig | 7 ++
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/ar8xxx.c | 303 +++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/ar8xxx.h | 82 +++++++++++++
net/dsa/dsa.c | 1 +
5 files changed, 394 insertions(+)
create mode 100644 drivers/net/dsa/ar8xxx.c
create mode 100644 drivers/net/dsa/ar8xxx.h
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -65,4 +65,13 @@ config NET_DSA_BCM_SF2
This enables support for the Broadcom Starfighter 2 Ethernet
switch chips.
+config NET_DSA_AR8XXX
+ tristate "Qualcomm Atheros AR8XXX Ethernet switch family support"
+ depends on NET_DSA
+ select NET_DSA_TAG_QCA
+ select REGMAP
+ ---help---
+ This enables support for the Qualcomm Atheros AR8XXX Ethernet
+ switch chips.
+
endmenu
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -14,3 +14,4 @@ ifdef CONFIG_NET_DSA_MV88E6171
mv88e6xxx_drv-y += mv88e6171.o
endif
obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
+obj-$(CONFIG_NET_DSA_AR8XXX) += ar8xxx.o
--- /dev/null
+++ b/drivers/net/dsa/ar8xxx.c
@@ -0,0 +1,529 @@
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <net/dsa.h>
+#include <linux/phy.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+
+#include "ar8xxx.h"
+
+#define MIB_DESC(_s, _o, _n) \
+ { \
+ .size = (_s), \
+ .offset = (_o), \
+ .name = (_n), \
+ }
+
+static const struct ar8xxx_mib_desc ar8327_mib[] = {
+ MIB_DESC(1, 0x00, "RxBroad"),
+ MIB_DESC(1, 0x04, "RxPause"),
+ MIB_DESC(1, 0x08, "RxMulti"),
+ MIB_DESC(1, 0x0c, "RxFcsErr"),
+ MIB_DESC(1, 0x10, "RxAlignErr"),
+ MIB_DESC(1, 0x14, "RxRunt"),
+ MIB_DESC(1, 0x18, "RxFragment"),
+ MIB_DESC(1, 0x1c, "Rx64Byte"),
+ MIB_DESC(1, 0x20, "Rx128Byte"),
+ MIB_DESC(1, 0x24, "Rx256Byte"),
+ MIB_DESC(1, 0x28, "Rx512Byte"),
+ MIB_DESC(1, 0x2c, "Rx1024Byte"),
+ MIB_DESC(1, 0x30, "Rx1518Byte"),
+ MIB_DESC(1, 0x34, "RxMaxByte"),
+ MIB_DESC(1, 0x38, "RxTooLong"),
+ MIB_DESC(2, 0x3c, "RxGoodByte"),
+ MIB_DESC(2, 0x44, "RxBadByte"),
+ MIB_DESC(1, 0x4c, "RxOverFlow"),
+ MIB_DESC(1, 0x50, "Filtered"),
+ MIB_DESC(1, 0x54, "TxBroad"),
+ MIB_DESC(1, 0x58, "TxPause"),
+ MIB_DESC(1, 0x5c, "TxMulti"),
+ MIB_DESC(1, 0x60, "TxUnderRun"),
+ MIB_DESC(1, 0x64, "Tx64Byte"),
+ MIB_DESC(1, 0x68, "Tx128Byte"),
+ MIB_DESC(1, 0x6c, "Tx256Byte"),
+ MIB_DESC(1, 0x70, "Tx512Byte"),
+ MIB_DESC(1, 0x74, "Tx1024Byte"),
+ MIB_DESC(1, 0x78, "Tx1518Byte"),
+ MIB_DESC(1, 0x7c, "TxMaxByte"),
+ MIB_DESC(1, 0x80, "TxOverSize"),
+ MIB_DESC(2, 0x84, "TxByte"),
+ MIB_DESC(1, 0x8c, "TxCollision"),
+ MIB_DESC(1, 0x90, "TxAbortCol"),
+ MIB_DESC(1, 0x94, "TxMultiCol"),
+ MIB_DESC(1, 0x98, "TxSingleCol"),
+ MIB_DESC(1, 0x9c, "TxExcDefer"),
+ MIB_DESC(1, 0xa0, "TxDefer"),
+ MIB_DESC(1, 0xa4, "TxLateCol"),
+};
+
+u32
+ar8xxx_mii_read32(struct mii_bus *bus, int phy_id, int regnum)
+{
+ u16 lo, hi;
+
+ lo = bus->read(bus, phy_id, regnum);
+ hi = bus->read(bus, phy_id, regnum + 1);
+
+ return (hi << 16) | lo;
+}
+
+void
+ar8xxx_mii_write32(struct mii_bus *bus, int phy_id, int regnum, u32 val)
+{
+ u16 lo, hi;
+
+ lo = val & 0xffff;
+ hi = (u16)(val >> 16);
+
+ bus->write(bus, phy_id, regnum, lo);
+ bus->write(bus, phy_id, regnum + 1, hi);
+}
+
+u32 ar8xxx_read(struct dsa_switch *ds, int reg)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+ u16 r1, r2, page;
+ u32 val;
+
+ split_addr((u32)reg, &r1, &r2, &page);
+
+ mutex_lock(&bus->mdio_lock);
+
+ bus->write(bus, 0x18, 0, page);
+ wait_for_page_switch();
+ val = ar8xxx_mii_read32(bus, 0x10 | r2, r1);
+
+ mutex_unlock(&bus->mdio_lock);
+
+ return val;
+}
+
+void ar8xxx_write(struct dsa_switch *ds, int reg, u32 val)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+ u16 r1, r2, page;
+
+ split_addr((u32)reg, &r1, &r2, &page);
+
+ mutex_lock(&bus->mdio_lock);
+
+ bus->write(bus, 0x18, 0, page);
+ wait_for_page_switch();
+ ar8xxx_mii_write32(bus, 0x10 | r2, r1, val);
+
+ mutex_unlock(&bus->mdio_lock);
+}
+
+u32
+ar8xxx_rmw(struct dsa_switch *ds, int reg, u32 mask, u32 val)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+ u16 r1, r2, page;
+ u32 ret;
+
+ split_addr((u32)reg, &r1, &r2, &page);
+
+ mutex_lock(&bus->mdio_lock);
+
+ bus->write(bus, 0x18, 0, page);
+ wait_for_page_switch();
+
+ ret = ar8xxx_mii_read32(bus, 0x10 | r2, r1);
+ ret &= ~mask;
+ ret |= val;
+ ar8xxx_mii_write32(bus, 0x10 | r2, r1, ret);
+
+ mutex_unlock(&bus->mdio_lock);
+
+ return ret;
+}
+
+static char *ar8xxx_probe(struct device *host_dev, int sw_addr)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
+ u32 phy_id;
+
+ if (!bus)
+ return NULL;
+
+ /* sw_addr is irrelevant as the switch occupies the MDIO bus from
+ * addresses 0 to 4 (PHYs) and 16-23 (for MDIO 32bits protocol). So
+ * we'll probe address 0 to see if we see the right switch family.
+ */
+ phy_id = mdiobus_read(bus, 0, MII_PHYSID1) << 16;
+ phy_id |= mdiobus_read(bus, 0, MII_PHYSID2);
+
+ switch (phy_id) {
+ case PHY_ID_QCA8337:
+ return "QCA8337";
+ default:
+ return NULL;
+ }
+}
+
+static int ar8xxx_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
+{
+ struct dsa_switch *ds = (struct dsa_switch *)ctx;
+
+ *val = ar8xxx_read(ds, reg);
+
+ return 0;
+}
+
+static int ar8xxx_regmap_write(void *ctx, uint32_t reg, uint32_t val)
+{
+ struct dsa_switch *ds = (struct dsa_switch *)ctx;
+
+ ar8xxx_write(ds, reg, val);
+
+ return 0;
+}
+
+static const struct regmap_range ar8xxx_readable_ranges[] = {
+ regmap_reg_range(0x0000, 0x00e4), /* Global control */
+ regmap_reg_range(0x0100, 0x0168), /* EEE control */
+ regmap_reg_range(0x0200, 0x0270), /* Parser control */
+ regmap_reg_range(0x0400, 0x0454), /* ACL */
+ regmap_reg_range(0x0600, 0x0718), /* Lookup */
+ regmap_reg_range(0x0800, 0x0b70), /* QM */
+ regmap_reg_range(0x0C00, 0x0c80), /* PKT */
+ regmap_reg_range(0x1000, 0x10ac), /* MIB - Port0 */
+ regmap_reg_range(0x1100, 0x11ac), /* MIB - Port1 */
+ regmap_reg_range(0x1200, 0x12ac), /* MIB - Port2 */
+ regmap_reg_range(0x1300, 0x13ac), /* MIB - Port3 */
+ regmap_reg_range(0x1400, 0x14ac), /* MIB - Port4 */
+ regmap_reg_range(0x1500, 0x15ac), /* MIB - Port5 */
+ regmap_reg_range(0x1600, 0x16ac), /* MIB - Port6 */
+
+};
+
+static struct regmap_access_table ar8xxx_readable_table = {
+ .yes_ranges = ar8xxx_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(ar8xxx_readable_ranges),
+};
+
+struct regmap_config ar8xxx_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x16ac, /* end MIB - Port6 range */
+ .reg_read = ar8xxx_regmap_read,
+ .reg_write = ar8xxx_regmap_write,
+ .rd_table = &ar8xxx_readable_table,
+};
+
+static int ar8xxx_set_pad_ctrl(struct dsa_switch *ds, int port, int mode)
+{
+ int reg;
+
+ switch (port) {
+ case 0:
+ reg = AR8327_REG_PORT0_PAD_CTRL;
+ break;
+ case 6:
+ reg = AR8327_REG_PORT6_PAD_CTRL;
+ break;
+ default:
+ pr_err("Can't set PAD_CTRL on port %d\n", port);
+ return -EINVAL;
+ }
+
+ /* DSA only supports 1 CPU port for now, so we'll take the assumption
+ * that P0 is connected to the CPU master_dev.
+ */
+ switch (mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ ar8xxx_write(ds, reg,
+ AR8327_PORT_PAD_RGMII_EN |
+ AR8327_PORT_PAD_RGMII_TX_DELAY(3) |
+ AR8327_PORT_PAD_RGMII_RX_DELAY(3));
+
+ /* According to the datasheet, RGMII delay is enabled through
+ * PORT5_PAD_CTRL for all ports, rather than individual port
+ * registers
+ */
+ ar8xxx_write(ds, AR8327_REG_PORT5_PAD_CTRL,
+ AR8327_PORT_PAD_RGMII_RX_DELAY_EN);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ ar8xxx_write(ds, reg, AR8327_PORT_PAD_SGMII_EN);
+ break;
+ default:
+ pr_err("xMII mode %d not supported\n", mode);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ar8xxx_of_setup(struct dsa_switch *ds)
+{
+ struct device_node *dn = ds->pd->of_node;
+ const char *s_phymode;
+ int ret, mode;
+ u32 phy_id, ctrl;
+
+ /* If port6-phy-mode property exists, configure it accordingly */
+ if (!of_property_read_string(dn, "qca,port6-phy-mode", &s_phymode)) {
+ for (mode = 0; mode < PHY_INTERFACE_MODE_MAX; mode++)
+ if (!strcasecmp(s_phymode, phy_modes(mode)))
+ break;
+
+ if (mode == PHY_INTERFACE_MODE_MAX)
+ pr_err("Unknown phy-mode: \"%s\"\n", s_phymode);
+
+ ret = ar8xxx_set_pad_ctrl(ds, 6, mode);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* If a phy ID is specified for PORT6 mac, connect them together */
+ if (!of_property_read_u32(dn, "qca,port6-phy-id", &phy_id)) {
+ ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(6),
+ AR8327_PORT_LOOKUP_MEMBER, BIT(phy_to_port(phy_id)));
+ ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(phy_to_port(phy_id)),
+ AR8327_PORT_LOOKUP_MEMBER, BIT(6));
+
+ /* We want the switch to be pass-through and act like a PHY on
+ * these ports. So BC/MC/UC & IGMP frames need to be accepted
+ */
+ ctrl = BIT(phy_to_port(phy_id)) | BIT(6);
+ ar8xxx_reg_set(ds, AR8327_REG_GLOBAL_FW_CTRL1,
+ ctrl << AR8327_GLOBAL_FW_CTRL1_IGMP_DP_S |
+ ctrl << AR8327_GLOBAL_FW_CTRL1_BC_DP_S |
+ ctrl << AR8327_GLOBAL_FW_CTRL1_MC_DP_S |
+ ctrl << AR8327_GLOBAL_FW_CTRL1_UC_DP_S);
+ }
+
+ return 0;
+}
+
+static int ar8xxx_setup(struct dsa_switch *ds)
+{
+ struct ar8xxx_priv *priv = ds_to_priv(ds);
+ struct net_device *netdev = ds->dst->pd->of_netdev;
+ int ret, i, phy_mode;
+
+ /* Start by setting up the register mapping */
+ priv->regmap = devm_regmap_init(ds->master_dev, NULL, ds,
+ &ar8xxx_regmap_config);
+
+ if (IS_ERR(priv->regmap))
+ pr_warn("regmap initialization failed");
+
+ /* Initialize CPU port pad mode (xMII type, delays...) */
+ phy_mode = of_get_phy_mode(netdev->dev.parent->of_node);
+ if (phy_mode < 0) {
+ pr_err("Can't find phy-mode for master device\n");
+ return phy_mode;
+ }
+
+ ret = ar8xxx_set_pad_ctrl(ds, 0, phy_mode);
+ if (ret < 0)
+ return ret;
+
+ /* Enable CPU Port */
+ ar8xxx_reg_set(ds, AR8327_REG_GLOBAL_FW_CTRL0,
+ AR8327_GLOBAL_FW_CTRL0_CPU_PORT_EN);
+
+ /* Enable MIB counters */
+ ar8xxx_reg_set(ds, AR8327_REG_MIB, AR8327_MIB_CPU_KEEP);
+ ar8xxx_write(ds, AR8327_REG_MODULE_EN, AR8327_MODULE_EN_MIB);
+
+ /* Enable QCA header mode on Port 0 */
+ ar8xxx_write(ds, AR8327_REG_PORT_HDR_CTRL(0),
+ AR8327_PORT_HDR_CTRL_ALL << AR8327_PORT_HDR_CTRL_TX_S |
+ AR8327_PORT_HDR_CTRL_ALL << AR8327_PORT_HDR_CTRL_RX_S);
+
+ /* Disable forwarding by default on all ports */
+ for (i = 0; i < AR8327_NUM_PORTS; i++)
+ ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(i),
+ AR8327_PORT_LOOKUP_MEMBER, 0);
+
+ /* Forward all unknown frames to CPU port for Linux processing */
+ ar8xxx_write(ds, AR8327_REG_GLOBAL_FW_CTRL1,
+ BIT(0) << AR8327_GLOBAL_FW_CTRL1_IGMP_DP_S |
+ BIT(0) << AR8327_GLOBAL_FW_CTRL1_BC_DP_S |
+ BIT(0) << AR8327_GLOBAL_FW_CTRL1_MC_DP_S |
+ BIT(0) << AR8327_GLOBAL_FW_CTRL1_UC_DP_S);
+
+ /* Setup connection between CPU ports & PHYs */
+ for (i = 0; i < DSA_MAX_PORTS; i++) {
+ /* CPU port gets connected to all PHYs in the switch */
+ if (dsa_is_cpu_port(ds, i)) {
+ ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(0),
+ AR8327_PORT_LOOKUP_MEMBER,
+ ds->phys_port_mask << 1);
+ }
+
+ /* Invividual PHYs gets connected to CPU port only */
+ if (ds->phys_port_mask & BIT(i)) {
+ int phy = phy_to_port(i);
+
+ ar8xxx_rmw(ds, AR8327_PORT_LOOKUP_CTRL(phy),
+ AR8327_PORT_LOOKUP_MEMBER, BIT(0));
+
+ /* Disable Auto-learning by default so the switch
+ * doesn't try to forward the frame to another port
+ */
+ ar8xxx_reg_clear(ds, AR8327_PORT_LOOKUP_CTRL(phy),
+ AR8327_PORT_LOOKUP_LEARN);
+ }
+ }
+
+ ret = ar8xxx_of_setup(ds);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int ar8xxx_set_addr(struct dsa_switch *ds, u8 *addr)
+{
+ return 0;
+}
+
+static int ar8xxx_phy_read(struct dsa_switch *ds, int phy, int regnum)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+
+ return mdiobus_read(bus, phy, regnum);
+}
+
+static int
+ar8xxx_phy_write(struct dsa_switch *ds, int phy, int regnum, u16 val)
+{
+ struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
+
+ return mdiobus_write(bus, phy, regnum, val);
+}
+
+static void ar8xxx_get_strings(struct dsa_switch *ds, int phy, uint8_t *data)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
+ strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
+ ETH_GSTRING_LEN);
+ }
+}
+
+static void ar8xxx_get_ethtool_stats(struct dsa_switch *ds, int phy,
+ uint64_t *data)
+{
+ const struct ar8xxx_mib_desc *mib;
+ uint32_t reg, i, port;
+ u64 hi;
+
+ port = phy_to_port(phy);
+
+ for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
+ mib = &ar8327_mib[i];
+ reg = AR8327_PORT_MIB_COUNTER(port) + mib->offset;
+
+ data[i] = ar8xxx_read(ds, reg);
+ if (mib->size == 2) {
+ hi = ar8xxx_read(ds, reg + 4);
+ data[i] |= hi << 32;
+ }
+ }
+}
+
+static int ar8xxx_get_sset_count(struct dsa_switch *ds)
+{
+ return ARRAY_SIZE(ar8327_mib);
+}
+
+static void ar8xxx_poll_link(struct dsa_switch *ds)
+{
+ int i = 0;
+ struct net_device *dev;
+
+ while ((dev = ds->ports[i++]) != NULL) {
+ u32 status;
+ int link;
+ int speed;
+ int duplex;
+
+ status = ar8xxx_read(ds, AR8327_REG_PORT_STATUS(i));
+ link = !!(status & AR8XXX_PORT_STATUS_LINK_UP);
+ duplex = !!(status & AR8XXX_PORT_STATUS_DUPLEX);
+
+ switch (status & AR8XXX_PORT_STATUS_SPEED) {
+ case AR8XXX_PORT_SPEED_10M:
+ speed = 10;
+ break;
+ case AR8XXX_PORT_SPEED_100M:
+ speed = 100;
+ break;
+ case AR8XXX_PORT_SPEED_1000M:
+ speed = 1000;
+ break;
+ default:
+ speed = 0;
+ }
+
+ if (!link) {
+ /* This poll happens every ~1s, so we don't want to
+ * print the status every time. Only when the device
+ * transitions from Link UP to Link DOWN
+ */
+ if (netif_carrier_ok(dev))
+ netif_carrier_off(dev);
+ continue;
+ } else {
+ /* Same thing here. But we detect a Link UP event */
+ if (!netif_carrier_ok(dev))
+ netif_carrier_on(dev);
+ continue;
+ }
+ }
+}
+
+static struct dsa_switch_driver ar8xxx_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_QCA,
+ .priv_size = sizeof(struct ar8xxx_priv),
+ .probe = ar8xxx_probe,
+ .setup = ar8xxx_setup,
+ .set_addr = ar8xxx_set_addr,
+ .poll_link = ar8xxx_poll_link,
+ .phy_read = ar8xxx_phy_read,
+ .phy_write = ar8xxx_phy_write,
+ .get_strings = ar8xxx_get_strings,
+ .get_ethtool_stats = ar8xxx_get_ethtool_stats,
+ .get_sset_count = ar8xxx_get_sset_count,
+};
+
+static int __init ar8xxx_init(void)
+{
+ register_switch_driver(&ar8xxx_switch_driver);
+ return 0;
+}
+module_init(ar8xxx_init);
+
+static void __exit ar8xxx_cleanup(void)
+{
+ unregister_switch_driver(&ar8xxx_switch_driver);
+}
+module_exit(ar8xxx_cleanup);
+
+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
+MODULE_DESCRIPTION("Driver for AR8XXX ethernet switch family");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ar8xxx");
--- /dev/null
+++ b/drivers/net/dsa/ar8xxx.h
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __AR8XXX_H
+#define __AR8XXX_H
+
+#include <linux/delay.h>
+#include <linux/regmap.h>
+
+struct ar8xxx_priv {
+ struct regmap *regmap;
+};
+
+struct ar8xxx_mib_desc {
+ unsigned int size;
+ unsigned int offset;
+ const char *name;
+};
+
+#define AR8327_NUM_PORTS 7
+
+#define PHY_ID_QCA8337 0x004dd036
+
+#define AR8327_REG_PORT0_PAD_CTRL 0x004
+#define AR8327_REG_PORT5_PAD_CTRL 0x008
+#define AR8327_REG_PORT6_PAD_CTRL 0x00c
+#define AR8327_PORT_PAD_RGMII_EN BIT(26)
+#define AR8327_PORT_PAD_RGMII_TX_DELAY(x) ((0x8 + (x & 0x3)) << 22)
+#define AR8327_PORT_PAD_RGMII_RX_DELAY(x) ((0x10 + (x & 0x3)) << 20)
+#define AR8327_PORT_PAD_RGMII_RX_DELAY_EN BIT(24)
+#define AR8327_PORT_PAD_SGMII_EN BIT(7)
+
+#define AR8327_REG_MODULE_EN 0x030
+#define AR8327_MODULE_EN_MIB BIT(0)
+#define AR8327_MODULE_EN_ACL BIT(1)
+#define AR8327_MODULE_EN_L3 BIT(2)
+
+#define AR8327_REG_MIB 0x034
+#define AR8327_MIB_CPU_KEEP BIT(20)
+
+#define AR8327_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
+#define AR8XXX_PORT_STATUS_SPEED GENMASK(2, 0)
+#define AR8XXX_PORT_STATUS_SPEED_S 0
+#define AR8XXX_PORT_STATUS_TXMAC BIT(2)
+#define AR8XXX_PORT_STATUS_RXMAC BIT(3)
+#define AR8XXX_PORT_STATUS_TXFLOW BIT(4)
+#define AR8XXX_PORT_STATUS_RXFLOW BIT(5)
+#define AR8XXX_PORT_STATUS_DUPLEX BIT(6)
+#define AR8XXX_PORT_STATUS_LINK_UP BIT(8)
+#define AR8XXX_PORT_STATUS_LINK_AUTO BIT(9)
+#define AR8XXX_PORT_STATUS_LINK_PAUSE BIT(10)
+
+#define AR8327_REG_PORT_HDR_CTRL(_i) (0x9c + (_i * 4))
+#define AR8327_PORT_HDR_CTRL_RX_MASK GENMASK(3, 2)
+#define AR8327_PORT_HDR_CTRL_RX_S 2
+#define AR8327_PORT_HDR_CTRL_TX_MASK GENMASK(1, 0)
+#define AR8327_PORT_HDR_CTRL_TX_S 0
+#define AR8327_PORT_HDR_CTRL_ALL 2
+#define AR8327_PORT_HDR_CTRL_MGMT 1
+#define AR8327_PORT_HDR_CTRL_NONE 0
+
+#define AR8327_REG_GLOBAL_FW_CTRL0 0x620
+#define AR8327_GLOBAL_FW_CTRL0_CPU_PORT_EN BIT(10)
+
+#define AR8327_REG_GLOBAL_FW_CTRL1 0x624
+#define AR8327_GLOBAL_FW_CTRL1_IGMP_DP_MASK GENMASK(30, 24)
+#define AR8327_GLOBAL_FW_CTRL1_IGMP_DP_S 24
+#define AR8327_GLOBAL_FW_CTRL1_BC_DP_MASK GENMASK(22, 16)
+#define AR8327_GLOBAL_FW_CTRL1_BC_DP_S 16
+#define AR8327_GLOBAL_FW_CTRL1_MC_DP_MASK GENMASK(14, 8)
+#define AR8327_GLOBAL_FW_CTRL1_MC_DP_S 8
+#define AR8327_GLOBAL_FW_CTRL1_UC_DP_MASK GENMASK(6, 0)
+#define AR8327_GLOBAL_FW_CTRL1_UC_DP_S 0
+
+#define AR8327_PORT_LOOKUP_CTRL(_i) (0x660 + (_i) * 0xc)
+#define AR8327_PORT_LOOKUP_MEMBER GENMASK(6, 0)
+#define AR8327_PORT_LOOKUP_IN_MODE GENMASK(9, 8)
+#define AR8327_PORT_LOOKUP_IN_MODE_S 8
+#define AR8327_PORT_LOOKUP_STATE GENMASK(18, 16)
+#define AR8327_PORT_LOOKUP_STATE_S 16
+#define AR8327_PORT_LOOKUP_LEARN BIT(20)
+#define AR8327_PORT_LOOKUP_ING_MIRROR_EN BIT(25)
+
+#define AR8327_PORT_MIB_COUNTER(_i) (0x1000 + (_i) * 0x100)
+
+/* port speed */
+enum {
+ AR8XXX_PORT_SPEED_10M = 0,
+ AR8XXX_PORT_SPEED_100M = 1,
+ AR8XXX_PORT_SPEED_1000M = 2,
+ AR8XXX_PORT_SPEED_ERR = 3,
+};
+
+static inline int port_to_phy(int port)
+{
+ if (port >= 1 && port <= 6)
+ return port - 1;
+
+ return -1;
+}
+
+static inline int phy_to_port(int phy)
+{
+ if (phy < 5)
+ return phy + 1;
+
+ return -1;
+}
+
+u32
+ar8xxx_rmw(struct dsa_switch *ds, int reg, u32 mask, u32 val);
+
+static inline void
+split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
+{
+ regaddr >>= 1;
+ *r1 = regaddr & 0x1e;
+
+ regaddr >>= 5;
+ *r2 = regaddr & 0x7;
+
+ regaddr >>= 3;
+ *page = regaddr & 0x1ff;
+}
+
+static inline void
+wait_for_page_switch(void)
+{
+ udelay(5);
+}
+
+static inline void
+ar8xxx_reg_set(struct dsa_switch *ds, int reg, u32 val)
+{
+ ar8xxx_rmw(ds, reg, 0, val);
+}
+
+static inline void
+ar8xxx_reg_clear(struct dsa_switch *ds, int reg, u32 val)
+{
+ ar8xxx_rmw(ds, reg, val, 0);
+}
+
+#endif /* __AR8XXX_H */
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -285,6 +285,11 @@ static int dsa_switch_setup_one(struct d
dst->rcv = brcm_netdev_ops.rcv;
break;
#endif
+#ifdef CONFIG_NET_DSA_TAG_QCA
+ case DSA_TAG_PROTO_QCA:
+ dst->rcv = qca_netdev_ops.rcv;
+ break;
+#endif
case DSA_TAG_PROTO_NONE:
break;
default:
@@ -1041,6 +1046,7 @@ static SIMPLE_DEV_PM_OPS(dsa_pm_ops, dsa
static const struct of_device_id dsa_of_match_table[] = {
{ .compatible = "brcm,bcm7445-switch-v4.0" },
+ { .compatible = "qca,ar8xxx", },
{ .compatible = "marvell,dsa", },
{}
};
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -26,6 +26,7 @@ enum dsa_tag_protocol {
DSA_TAG_PROTO_TRAILER,
DSA_TAG_PROTO_EDSA,
DSA_TAG_PROTO_BRCM,
+ DSA_TAG_PROTO_QCA,
};
#define DSA_MAX_SWITCHES 4
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -26,6 +26,9 @@ config NET_DSA_HWMON
via the hwmon sysfs interface and exposes the onboard sensors.
# tagging formats
+config NET_DSA_TAG_QCA
+ bool
+
config NET_DSA_TAG_BRCM
bool
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_NET_DSA) += dsa_core.o
dsa_core-y += dsa.o slave.o
# tagging formats
+dsa_core-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
dsa_core-$(CONFIG_NET_DSA_TAG_BRCM) += tag_brcm.o
dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -78,5 +78,7 @@ extern const struct dsa_device_ops trail
/* tag_brcm.c */
extern const struct dsa_device_ops brcm_netdev_ops;
+/* tag_qca.c */
+extern const struct dsa_device_ops qca_netdev_ops;
#endif
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1180,6 +1180,11 @@ int dsa_slave_create(struct dsa_switch *
p->xmit = brcm_netdev_ops.xmit;
break;
#endif
+#ifdef CONFIG_NET_DSA_TAG_QCA
+ case DSA_TAG_PROTO_QCA:
+ p->xmit = qca_netdev_ops.xmit;
+ break;
+#endif
default:
p->xmit = dsa_slave_notag_xmit;
break;
--- /dev/null
+++ b/net/dsa/tag_qca.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/etherdevice.h>
+#include "dsa_priv.h"
+
+#define QCA_HDR_LEN 2
+#define QCA_HDR_VERSION 0x2
+
+#define QCA_HDR_RECV_VERSION_MASK GENMASK(15, 14)
+#define QCA_HDR_RECV_VERSION_S 14
+#define QCA_HDR_RECV_PRIORITY_MASK GENMASK(13, 11)
+#define QCA_HDR_RECV_PRIORITY_S 11
+#define QCA_HDR_RECV_TYPE_MASK GENMASK(10, 6)
+#define QCA_HDR_RECV_TYPE_S 6
+#define QCA_HDR_RECV_FRAME_IS_TAGGED BIT(3)
+#define QCA_HDR_RECV_SOURCE_PORT_MASK GENMASK(2, 0)
+
+#define QCA_HDR_XMIT_VERSION_MASK GENMASK(15, 14)
+#define QCA_HDR_XMIT_VERSION_S 14
+#define QCA_HDR_XMIT_PRIORITY_MASK GENMASK(13, 11)
+#define QCA_HDR_XMIT_PRIORITY_S 11
+#define QCA_HDR_XMIT_CONTROL_MASK GENMASK(10, 8)
+#define QCA_HDR_XMIT_CONTROL_S 8
+#define QCA_HDR_XMIT_FROM_CPU BIT(7)
+#define QCA_HDR_XMIT_DP_BIT_MASK GENMASK(6, 0)
+
+static inline int reg_to_port(int reg)
+{
+ if (reg < 5)
+ return reg + 1;
+
+ return -1;
+}
+
+static inline int port_to_reg(int port)
+{
+ if (port >= 1 && port <= 6)
+ return port - 1;
+
+ return -1;
+}
+
+static netdev_tx_t qca_tag_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct dsa_slave_priv *p = netdev_priv(dev);
+ u16 *phdr, hdr;
+
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
+
+ if (skb_cow_head(skb, 0) < 0)
+ goto out_free;
+
+ skb_push(skb, QCA_HDR_LEN);
+
+ memmove(skb->data, skb->data + QCA_HDR_LEN, 2 * ETH_ALEN);
+ phdr = (u16 *)(skb->data + 2 * ETH_ALEN);
+
+ /* Set the version field, and set destination port information */
+ hdr = QCA_HDR_VERSION << QCA_HDR_XMIT_VERSION_S |
+ QCA_HDR_XMIT_FROM_CPU |
+ 1 << reg_to_port(p->port);
+
+ *phdr = htons(hdr);
+
+ skb->dev = p->parent->dst->master_netdev;
+ dev_queue_xmit(skb);
+
+ return NETDEV_TX_OK;
+
+out_free:
+ kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
+
+static int qca_tag_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *pt, struct net_device *orig_dev)
+{
+ struct dsa_switch_tree *dst = dev->dsa_ptr;
+ struct dsa_switch *ds;
+ u8 ver;
+ int port, phy;
+ __be16 *phdr, hdr;
+
+ if (unlikely(!dst))
+ goto out_drop;
+
+ skb = skb_unshare(skb, GFP_ATOMIC);
+ if (!skb)
+ goto out;
+
+ if (unlikely(!pskb_may_pull(skb, QCA_HDR_LEN)))
+ goto out_drop;
+
+ /* Ethernet is added by the switch between src addr and Ethertype
+ * At this point, skb->data points to ethertype so header should be
+ * right before
+ */
+ phdr = (__be16 *)(skb->data - 2);
+ hdr = ntohs(*phdr);
+
+ /* Make sure the version is correct */
+ ver = (hdr & QCA_HDR_RECV_VERSION_MASK) >> QCA_HDR_RECV_VERSION_S;
+ if (unlikely(ver != QCA_HDR_VERSION))
+ goto out_drop;
+
+ /* Remove QCA tag and recalculate checksum */
+ skb_pull_rcsum(skb, QCA_HDR_LEN);
+ memmove(skb->data - ETH_HLEN, skb->data - ETH_HLEN - QCA_HDR_LEN,
+ ETH_HLEN - QCA_HDR_LEN);
+
+ /* This protocol doesn't support cascading multiple switches so it's
+ * safe to assume the switch is first in the tree
+ */
+ ds = dst->ds[0];
+ if (!ds)
+ goto out_drop;
+
+ /* Get source port information */
+ port = (hdr & QCA_HDR_RECV_SOURCE_PORT_MASK);
+ phy = port_to_reg(port);
+ if (unlikely(phy < 0) || !ds->ports[phy])
+ goto out_drop;
+
+ /* Update skb & forward the frame accordingly */
+ skb_push(skb, ETH_HLEN);
+ skb->pkt_type = PACKET_HOST;
+ skb->dev = ds->ports[phy];
+ skb->protocol = eth_type_trans(skb, skb->dev);
+
+ skb->dev->stats.rx_packets++;
+ skb->dev->stats.rx_bytes += skb->len;
+
+ netif_receive_skb(skb);
+
+ return 0;
+
+out_drop:
+ kfree_skb(skb);
+out:
+ return 0;
+}
+
+const struct dsa_device_ops qca_netdev_ops = {
+ .xmit = qca_tag_xmit,
+ .rcv = qca_tag_rcv,
+};
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/qca-ar8xxx.txt
@@ -0,0 +1,70 @@
+* Qualcomm Atheros AR8xxx switch family
+
+Required properties:
+
+- compatible: should be "qca,ar8xxx"
+- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt
+- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt
+- #size-cells: must be 0
+- #address-cells: must be 2, see dsa/dsa.txt
+
+Subnodes:
+
+The integrated switch subnode should be specified according to the binding
+described in dsa/dsa.txt.
+
+Optional properties:
+
+- qca,port6-phy-mode: if specified, the driver will configure Port 6 in the
+ given phy-mode. See Documentation/devicetree/bindings/net/ethernet.txt for
+ the list of valid phy-mode.
+
+- qca,port6-phy-id: if specified, the driver will connect Port 6 to the PHY
+ given as a parameter. In this case, Port6 and the corresponding PHY will be
+ isolated from the rest of the switch. From a system perspective, they will
+ act as a regular PHY.
+
+Example:
+
+ dsa@0 {
+ compatible = "qca,ar8xxx";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <&ethernet0>;
+ dsa,mii-bus = <&mii_bus0>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0>; /* MDIO address 0, switch 0 in tree */
+
+ qca,port6-phy-mode = "sgmii";
+ qca,port6-phy-id = <4>;
+
+ port@0 {
+ reg = <11>;
+ label = "cpu";
+ };
+
+ port@1 {
+ reg = <0>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <1>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <2>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <3>;
+ label = "lan4";
+ };
+ };
+ };
Reference in a new issue View git blame Copy permalink