openwrtv4

No description

Find a file

Felix Fietkau c75a0e86b1 ar71xx: add mask and shift for RXD/RDV bits in AR934X register file The commit r38948 ("ag71xx: add F1E specific feature bit definitions to AR934X register file") introduced definitions for some bits in the RDV/RXD part of the ETH_CFG register of AR934x. These are incomplete because ETH_RXDV_DELAY is specified as 17:16 and ETH_RXD_DELAY is specified 15:14. The original commit only specified the lower bits. The upper bits also have to be unset when the lower bits should only be set. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45522		2015-04-20 15:00:41 +00:00
config	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
docs	docs: Fix typo buysbox -> busybox.	2015-04-09 10:32:26 +00:00
include	all: replace genext2fs with make_ext4fs	2015-04-20 13:57:43 +00:00
package	mac80211: fallback to wpa_supplicant to setup encrypted mesh	2015-04-20 15:00:13 +00:00
scripts	scripts/ipkg: remove file, it is obsolete	2015-03-29 07:35:36 +00:00
target	ar71xx: add mask and shift for RXD/RDV bits in AR934X register file	2015-04-20 15:00:41 +00:00
toolchain	uClibc: backport sync_file_range fixes (closes: #19350 )	2015-04-02 23:21:30 +00:00
tools	tools: drop unused genext2fs	2015-04-20 13:58:22 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: clean up sitefiles, make them per-arch	2015-03-28 13:38:34 +00:00
README	Add 'subversion' build dependency to README	2014-08-31 12:06:32 +00:00
rules.mk	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org