openwrtv4/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c
Gabor Juhos c72313fd98 ar71xx: implement switch fix for WD My Net N750
The bootloader on the WD My Net N750 disables the ports on it's internal
AR8327N switch by powering them down. The stock firmware then brings the
ports back up again by starting the auto negotiation process on each
port.

This fix implements just that.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/4615/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39128
2013-12-17 22:14:11 +00:00

215 lines
5.5 KiB
C

/*
* WD My Net N750 board support
*
* Copyright (C) 2013 Felix Kaechele <felix@fetzig.org>
* Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/pci.h>
#include <linux/phy.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "nvram.h"
/*
* Taken from GPL bootloader source:
* board/ar7240/db12x/alpha_gpio.c
*/
#define MYNET_N750_GPIO_LED_WIFI 11
#define MYNET_N750_GPIO_LED_INTERNET 12
#define MYNET_N750_GPIO_LED_WPS 13
#define MYNET_N750_GPIO_LED_POWER 14
#define MYNET_N750_GPIO_BTN_RESET 17
#define MYNET_N750_GPIO_BTN_WPS 19
#define MYNET_N750_GPIO_EXTERNAL_LNA0 15
#define MYNET_N750_GPIO_EXTERNAL_LNA1 18
#define MYNET_N750_KEYS_POLL_INTERVAL 20 /* msecs */
#define MYNET_N750_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_N750_KEYS_POLL_INTERVAL)
#define MYNET_N750_WMAC_CALDATA_OFFSET 0x1000
#define MYNET_N750_PCIE_CALDATA_OFFSET 0x5000
#define MYNET_N750_NVRAM_ADDR 0x1f058010
#define MYNET_N750_NVRAM_SIZE 0x7ff0
static struct gpio_led mynet_n750_leds_gpio[] __initdata = {
{
.name = "wd:blue:power",
.gpio = MYNET_N750_GPIO_LED_POWER,
.active_low = 0,
},
{
.name = "wd:blue:wps",
.gpio = MYNET_N750_GPIO_LED_WPS,
.active_low = 0,
},
{
.name = "wd:blue:wireless",
.gpio = MYNET_N750_GPIO_LED_WIFI,
.active_low = 0,
},
{
.name = "wd:blue:internet",
.gpio = MYNET_N750_GPIO_LED_INTERNET,
.active_low = 0,
},
};
static struct gpio_keys_button mynet_n750_gpio_keys[] __initdata = {
{
.desc = "Reset button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = MYNET_N750_KEYS_DEBOUNCE_INTERVAL,
.gpio = MYNET_N750_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "WPS button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = MYNET_N750_KEYS_DEBOUNCE_INTERVAL,
.gpio = MYNET_N750_GPIO_BTN_WPS,
.active_low = 1,
},
};
static struct ar8327_pad_cfg mynet_n750_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_RGMII,
.txclk_delay_en = true,
.rxclk_delay_en = true,
.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
};
static struct ar8327_led_cfg mynet_n750_ar8327_led_cfg = {
.led_ctrl0 = 0xc737c737,
.led_ctrl1 = 0x00000000,
.led_ctrl2 = 0x00000000,
.led_ctrl3 = 0x0030c300,
.open_drain = false,
};
static struct ar8327_platform_data mynet_n750_ar8327_data = {
.pad0_cfg = &mynet_n750_ar8327_pad0_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
.led_cfg = &mynet_n750_ar8327_led_cfg,
};
static struct mdio_board_info mynet_n750_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &mynet_n750_ar8327_data,
},
};
static void mynet_n750_get_mac(const char *name, char *mac)
{
u8 *nvram = (u8 *) KSEG1ADDR(MYNET_N750_NVRAM_ADDR);
int err;
err = ath79_nvram_parse_mac_addr(nvram, MYNET_N750_NVRAM_SIZE,
name, mac);
if (err)
pr_err("no MAC address found for %s\n", name);
}
/*
* The bootloader on this board powers down all PHYs on the switch
* before booting the kernel. We bring all PHYs back up so that they are
* discoverable by the mdio bus scan and the switch is detected
* correctly.
*/
static void mynet_n750_mdio_fixup(struct mii_bus *bus)
{
int i;
for (i = 0; i < 5; i++)
bus->write(bus, i, MII_BMCR,
(BMCR_RESET | BMCR_ANENABLE | BMCR_SPEED1000));
mdelay(1000);
}
static void __init mynet_n750_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
u8 tmpmac[ETH_ALEN];
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_n750_leds_gpio),
mynet_n750_leds_gpio);
ath79_register_gpio_keys_polled(-1, MYNET_N750_KEYS_POLL_INTERVAL,
ARRAY_SIZE(mynet_n750_gpio_keys),
mynet_n750_gpio_keys);
/*
* Control signal for external LNAs 0 and 1
* Taken from GPL bootloader source:
* board/ar7240/db12x/alpha_gpio.c
*/
gpio_request_one(MYNET_N750_GPIO_EXTERNAL_LNA0,
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
"External LNA0");
gpio_request_one(MYNET_N750_GPIO_EXTERNAL_LNA1,
GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
"External LNA1");
mynet_n750_get_mac("wlan24mac=", tmpmac);
ath79_register_wmac(art + MYNET_N750_WMAC_CALDATA_OFFSET, tmpmac);
mynet_n750_get_mac("wlan5mac=", tmpmac);
ap91_pci_init(art + MYNET_N750_PCIE_CALDATA_OFFSET, tmpmac);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
mdiobus_register_board_info(mynet_n750_mdio0_info,
ARRAY_SIZE(mynet_n750_mdio0_info));
ath79_mdio0_data.reset = mynet_n750_mdio_fixup;
ath79_register_mdio(0, 0x0);
mynet_n750_get_mac("lanmac=", ath79_eth0_data.mac_addr);
/* GMAC0 is connected to an AR8327N switch */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_pll_data.pll_1000 = 0x06000000;
ath79_register_eth(0);
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_MYNET_N750, "MYNET-N750", "WD My Net N750",
mynet_n750_setup);