openwrtv4/target/linux/brcm2708/patches-3.10/014-bcm2708-sdhci-driver.patch
Hauke Mehrtens 952db22551 kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
2013-12-15 19:16:30 +00:00

2572 lines
74 KiB
Diff

--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1333,7 +1333,7 @@ static void mmc_blk_rw_rq_prep(struct mm
brq->data.blocks = 1;
}
- if (brq->data.blocks > 1 || do_rel_wr) {
+ if (brq->data.blocks > 1 || do_rel_wr || card->host->caps2 & MMC_CAP2_FORCE_MULTIBLOCK) {
/* SPI multiblock writes terminate using a special
* token, not a STOP_TRANSMISSION request.
*/
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -13,6 +13,8 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/stat.h>
+#include <linux/jiffies.h>
+#include <linux/nmi.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
@@ -58,6 +60,15 @@ static const unsigned int tacc_mant[] =
__res & __mask; \
})
+// timeout for tries
+static const unsigned long retry_timeout_ms= 10*1000;
+
+// try at least 10 times, even if timeout is reached
+static const int retry_min_tries= 10;
+
+// delay between tries
+static const unsigned long retry_delay_ms= 10;
+
/*
* Given the decoded CSD structure, decode the raw CID to our CID structure.
*/
@@ -210,12 +221,62 @@ static int mmc_decode_scr(struct mmc_car
}
/*
- * Fetch and process SD Status register.
+ * Fetch and process SD Configuration Register.
+ */
+static int mmc_read_scr(struct mmc_card *card)
+{
+ unsigned long timeout_at;
+ int err, tries;
+
+ timeout_at= jiffies + msecs_to_jiffies( retry_timeout_ms );
+ tries= 0;
+
+ while( tries < retry_min_tries || time_before( jiffies, timeout_at ) )
+ {
+ unsigned long delay_at;
+ tries++;
+
+ err = mmc_app_send_scr(card, card->raw_scr);
+ if( !err )
+ break; // success!!!
+
+ touch_nmi_watchdog(); // we are still alive!
+
+ // delay
+ delay_at= jiffies + msecs_to_jiffies( retry_delay_ms );
+ while( time_before( jiffies, delay_at ) )
+ {
+ mdelay( 1 );
+ touch_nmi_watchdog(); // we are still alive!
+ }
+ }
+
+ if( err)
+ {
+ pr_err("%s: failed to read SD Configuration register (SCR) after %d tries during %lu ms, error %d\n", mmc_hostname(card->host), tries, retry_timeout_ms, err );
+ return err;
+ }
+
+ if( tries > 1 )
+ {
+ pr_info("%s: could read SD Configuration register (SCR) at the %dth attempt\n", mmc_hostname(card->host), tries );
+ }
+
+ err = mmc_decode_scr(card);
+ if (err)
+ return err;
+
+ return err;
+}
+
+/*
+ * Fetch and process SD Status Register.
*/
static int mmc_read_ssr(struct mmc_card *card)
{
+ unsigned long timeout_at;
unsigned int au, es, et, eo;
- int err, i;
+ int err, i, tries;
u32 *ssr;
if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
@@ -228,14 +289,40 @@ static int mmc_read_ssr(struct mmc_card
if (!ssr)
return -ENOMEM;
+ timeout_at= jiffies + msecs_to_jiffies( retry_timeout_ms );
+ tries= 0;
+
+ while( tries < retry_min_tries || time_before( jiffies, timeout_at ) )
+ {
+ unsigned long delay_at;
+ tries++;
+
err = mmc_app_sd_status(card, ssr);
- if (err) {
- pr_warning("%s: problem reading SD Status "
- "register.\n", mmc_hostname(card->host));
- err = 0;
+ if( !err )
+ break; // sucess!!!
+
+ touch_nmi_watchdog(); // we are still alive!
+
+ // delay
+ delay_at= jiffies + msecs_to_jiffies( retry_delay_ms );
+ while( time_before( jiffies, delay_at ) )
+ {
+ mdelay( 1 );
+ touch_nmi_watchdog(); // we are still alive!
+ }
+ }
+
+ if( err)
+ {
+ pr_err("%s: failed to read SD Status register (SSR) after %d tries during %lu ms, error %d\n", mmc_hostname(card->host), tries, retry_timeout_ms, err );
goto out;
}
+ if( tries > 1 )
+ {
+ pr_info("%s: read SD Status register (SSR) after %d attempts\n", mmc_hostname(card->host), tries );
+ }
+
for (i = 0; i < 16; i++)
ssr[i] = be32_to_cpu(ssr[i]);
@@ -808,13 +895,9 @@ int mmc_sd_setup_card(struct mmc_host *h
if (!reinit) {
/*
- * Fetch SCR from card.
+ * Fetch and decode SD Configuration register.
*/
- err = mmc_app_send_scr(card, card->raw_scr);
- if (err)
- return err;
-
- err = mmc_decode_scr(card);
+ err = mmc_read_scr(card);
if (err)
return err;
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -249,6 +249,27 @@ config MMC_SDHCI_S3C_DMA
YMMV.
+config MMC_SDHCI_BCM2708
+ tristate "SDHCI support on BCM2708"
+ depends on MMC_SDHCI && MACH_BCM2708
+ select MMC_SDHCI_IO_ACCESSORS
+ help
+ This selects the Secure Digital Host Controller Interface (SDHCI)
+ often referrered to as the eMMC block.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
+
+config MMC_SDHCI_BCM2708_DMA
+ bool "DMA support on BCM2708 Arasan controller"
+ depends on MMC_SDHCI_BCM2708
+ help
+ Enable DMA support on the Arasan SDHCI controller in Broadcom 2708
+ based chips.
+
+ If unsure, say N.
+
config MMC_SDHCI_BCM2835
tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
depends on ARCH_BCM2835
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-p
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o
obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o
+obj-$(CONFIG_MMC_SDHCI_BCM2708) += sdhci-bcm2708.o
obj-$(CONFIG_MMC_WBSD) += wbsd.o
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
--- /dev/null
+++ b/drivers/mmc/host/sdhci-bcm2708.c
@@ -0,0 +1,1420 @@
+/*
+ * sdhci-bcm2708.c Support for SDHCI device on BCM2708
+ * Copyright (c) 2010 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * SDHCI platform device - Arasan SD controller in BCM2708
+ *
+ * Inspired by sdhci-pci.c, by Pierre Ossman
+ */
+
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sd.h>
+
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <mach/dma.h>
+
+#include "sdhci.h"
+
+/*****************************************************************************\
+ * *
+ * Configuration *
+ * *
+\*****************************************************************************/
+
+#define DRIVER_NAME "bcm2708_sdhci"
+
+/* for the time being insist on DMA mode - PIO seems not to work */
+#ifndef CONFIG_MMC_SDHCI_BCM2708_DMA
+#warning Non-DMA (PIO) version of this driver currently unavailable
+#endif
+#undef CONFIG_MMC_SDHCI_BCM2708_DMA
+#define CONFIG_MMC_SDHCI_BCM2708_DMA y
+
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+/* #define CHECK_DMA_USE */
+#endif
+//#define LOG_REGISTERS
+
+#define USE_SCHED_TIME
+#define USE_SPACED_WRITES_2CLK 1 /* space consecutive register writes */
+#define USE_SOFTWARE_TIMEOUTS 1 /* not hardware timeouts */
+#define SOFTWARE_ERASE_TIMEOUT_SEC 30
+
+#define SDHCI_BCM_DMA_CHAN 4 /* this default is normally overriden */
+#define SDHCI_BCM_DMA_WAITS 0 /* delays slowing DMA transfers: 0-31 */
+/* We are worried that SD card DMA use may be blocking the AXI bus for others */
+
+/*! TODO: obtain these from the physical address */
+#define DMA_SDHCI_BASE 0x7e300000 /* EMMC register block on Videocore */
+#define DMA_SDHCI_BUFFER (DMA_SDHCI_BASE + SDHCI_BUFFER)
+
+#define BCM2708_SDHCI_SLEEP_TIMEOUT 1000 /* msecs */
+
+/* Mhz clock that the EMMC core is running at. Should match the platform clockman settings */
+#define BCM2708_EMMC_CLOCK_FREQ 50000000
+
+#define REG_EXRDFIFO_EN 0x80
+#define REG_EXRDFIFO_CFG 0x84
+
+int cycle_delay=2;
+
+/*****************************************************************************\
+ * *
+ * Debug *
+ * *
+\*****************************************************************************/
+
+
+
+#define DBG(f, x...) \
+ pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
+// printk(KERN_INFO DRIVER_NAME " [%s()]: " f, __func__,## x)//GRAYG
+
+
+/*****************************************************************************\
+ * *
+ * High Precision Time *
+ * *
+\*****************************************************************************/
+
+#ifdef USE_SCHED_TIME
+
+#include <mach/frc.h>
+
+typedef unsigned long hptime_t;
+
+#define FMT_HPT "lu"
+
+static inline hptime_t hptime(void)
+{
+ return frc_clock_ticks32();
+}
+
+#define HPTIME_CLK_NS 1000ul
+
+#else
+
+typedef unsigned long hptime_t;
+
+#define FMT_HPT "lu"
+
+static inline hptime_t hptime(void)
+{
+ return jiffies;
+}
+
+#define HPTIME_CLK_NS (1000000000ul/HZ)
+
+#endif
+
+static inline unsigned long int since_ns(hptime_t t)
+{
+ return (unsigned long)((hptime() - t) * HPTIME_CLK_NS);
+}
+
+static bool allow_highspeed = 1;
+static int emmc_clock_freq = BCM2708_EMMC_CLOCK_FREQ;
+static bool sync_after_dma = 1;
+static bool missing_status = 1;
+static bool spurious_crc_acmd51 = 0;
+bool enable_llm = 1;
+bool extra_messages = 0;
+
+#if 0
+static void hptime_test(void)
+{
+ hptime_t now;
+ hptime_t later;
+
+ now = hptime();
+ msleep(10);
+ later = hptime();
+
+ printk(KERN_INFO DRIVER_NAME": 10ms = %"FMT_HPT" clks "
+ "(from %"FMT_HPT" to %"FMT_HPT") = %luns\n",
+ later-now, now, later,
+ (unsigned long)(HPTIME_CLK_NS * (later - now)));
+
+ now = hptime();
+ msleep(1000);
+ later = hptime();
+
+ printk(KERN_INFO DRIVER_NAME": 1s = %"FMT_HPT" clks "
+ "(from %"FMT_HPT" to %"FMT_HPT") = %luns\n",
+ later-now, now, later,
+ (unsigned long)(HPTIME_CLK_NS * (later - now)));
+}
+#endif
+
+/*****************************************************************************\
+ * *
+ * SDHCI core callbacks *
+ * *
+\*****************************************************************************/
+
+
+#ifdef CHECK_DMA_USE
+/*#define CHECK_DMA_REG_USE*/
+#endif
+
+#ifdef CHECK_DMA_REG_USE
+/* we don't expect anything to be using these registers during a
+ DMA (except the IRQ status) - so check */
+static void check_dma_reg_use(struct sdhci_host *host, int reg);
+#else
+#define check_dma_reg_use(host, reg)
+#endif
+
+
+static inline u32 sdhci_bcm2708_raw_readl(struct sdhci_host *host, int reg)
+{
+ return readl(host->ioaddr + reg);
+}
+
+u32 sdhci_bcm2708_readl(struct sdhci_host *host, int reg)
+{
+ u32 l = sdhci_bcm2708_raw_readl(host, reg);
+
+#ifdef LOG_REGISTERS
+ printk(KERN_ERR "%s: readl from 0x%02x, value 0x%08x\n",
+ mmc_hostname(host->mmc), reg, l);
+#endif
+ check_dma_reg_use(host, reg);
+
+ return l;
+}
+
+u16 sdhci_bcm2708_readw(struct sdhci_host *host, int reg)
+{
+ u32 l = sdhci_bcm2708_raw_readl(host, reg & ~3);
+ u32 w = l >> (reg << 3 & 0x18) & 0xffff;
+
+#ifdef LOG_REGISTERS
+ printk(KERN_ERR "%s: readw from 0x%02x, value 0x%04x\n",
+ mmc_hostname(host->mmc), reg, w);
+#endif
+ check_dma_reg_use(host, reg);
+
+ return (u16)w;
+}
+
+u8 sdhci_bcm2708_readb(struct sdhci_host *host, int reg)
+{
+ u32 l = sdhci_bcm2708_raw_readl(host, reg & ~3);
+ u32 b = l >> (reg << 3 & 0x18) & 0xff;
+
+#ifdef LOG_REGISTERS
+ printk(KERN_ERR "%s: readb from 0x%02x, value 0x%02x\n",
+ mmc_hostname(host->mmc), reg, b);
+#endif
+ check_dma_reg_use(host, reg);
+
+ return (u8)b;
+}
+
+
+static void sdhci_bcm2708_raw_writel(struct sdhci_host *host, u32 val, int reg)
+{
+ u32 ier;
+
+#if USE_SPACED_WRITES_2CLK
+ static bool timeout_disabled = false;
+ unsigned int ns_2clk = 0;
+
+ /* The Arasan has a bugette whereby it may lose the content of
+ * successive writes to registers that are within two SD-card clock
+ * cycles of each other (a clock domain crossing problem).
+ * It seems, however, that the data register does not have this problem.
+ * (Which is just as well - otherwise we'd have to nobble the DMA engine
+ * too)
+ */
+ if (reg != SDHCI_BUFFER && host->clock != 0) {
+ /* host->clock is the clock freq in Hz */
+ static hptime_t last_write_hpt;
+ hptime_t now = hptime();
+ ns_2clk = cycle_delay*1000000/(host->clock/1000);
+
+ if (now == last_write_hpt || now == last_write_hpt+1) {
+ /* we can't guarantee any significant time has
+ * passed - we'll have to wait anyway ! */
+ ndelay(ns_2clk);
+ } else
+ {
+ /* we must have waited at least this many ns: */
+ unsigned int ns_wait = HPTIME_CLK_NS *
+ (last_write_hpt - now - 1);
+ if (ns_wait < ns_2clk)
+ ndelay(ns_2clk - ns_wait);
+ }
+ last_write_hpt = now;
+ }
+#if USE_SOFTWARE_TIMEOUTS
+ /* The Arasan is clocked for timeouts using the SD clock which is too
+ * fast for ERASE commands and causes issues. So we disable timeouts
+ * for ERASE */
+ if (host->cmd != NULL && host->cmd->opcode == MMC_ERASE &&
+ reg == (SDHCI_COMMAND & ~3)) {
+ mod_timer(&host->timer,
+ jiffies + SOFTWARE_ERASE_TIMEOUT_SEC * HZ);
+ ier = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
+ ier &= ~SDHCI_INT_DATA_TIMEOUT;
+ writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
+ timeout_disabled = true;
+ ndelay(ns_2clk);
+ } else if (timeout_disabled) {
+ ier = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
+ ier |= SDHCI_INT_DATA_TIMEOUT;
+ writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
+ timeout_disabled = false;
+ ndelay(ns_2clk);
+ }
+#endif
+ writel(val, host->ioaddr + reg);
+#else
+ void __iomem * regaddr = host->ioaddr + reg;
+
+ writel(val, regaddr);
+
+ if (reg != SDHCI_BUFFER && reg != SDHCI_INT_STATUS && host->clock != 0)
+ {
+ int timeout = 100000;
+ while (val != readl(regaddr) && --timeout > 0)
+ continue;
+
+ if (timeout <= 0)
+ printk(KERN_ERR "%s: writing 0x%X to reg 0x%X "
+ "always gives 0x%X\n",
+ mmc_hostname(host->mmc),
+ val, reg, readl(regaddr));
+ BUG_ON(timeout <= 0);
+ }
+#endif
+}
+
+
+void sdhci_bcm2708_writel(struct sdhci_host *host, u32 val, int reg)
+{
+#ifdef LOG_REGISTERS
+ printk(KERN_ERR "%s: writel to 0x%02x, value 0x%08x\n",
+ mmc_hostname(host->mmc), reg, val);
+#endif
+ check_dma_reg_use(host, reg);
+
+ sdhci_bcm2708_raw_writel(host, val, reg);
+}
+
+void sdhci_bcm2708_writew(struct sdhci_host *host, u16 val, int reg)
+{
+ static u32 shadow = 0;
+
+ u32 p = reg == SDHCI_COMMAND ? shadow :
+ sdhci_bcm2708_raw_readl(host, reg & ~3);
+ u32 s = reg << 3 & 0x18;
+ u32 l = val << s;
+ u32 m = 0xffff << s;
+
+#ifdef LOG_REGISTERS
+ printk(KERN_ERR "%s: writew to 0x%02x, value 0x%04x\n",
+ mmc_hostname(host->mmc), reg, val);
+#endif
+
+ if (reg == SDHCI_TRANSFER_MODE)
+ shadow = (p & ~m) | l;
+ else {
+ check_dma_reg_use(host, reg);
+ sdhci_bcm2708_raw_writel(host, (p & ~m) | l, reg & ~3);
+ }
+}
+
+void sdhci_bcm2708_writeb(struct sdhci_host *host, u8 val, int reg)
+{
+ u32 p = sdhci_bcm2708_raw_readl(host, reg & ~3);
+ u32 s = reg << 3 & 0x18;
+ u32 l = val << s;
+ u32 m = 0xff << s;
+
+#ifdef LOG_REGISTERS
+ printk(KERN_ERR "%s: writeb to 0x%02x, value 0x%02x\n",
+ mmc_hostname(host->mmc), reg, val);
+#endif
+
+ check_dma_reg_use(host, reg);
+ sdhci_bcm2708_raw_writel(host, (p & ~m) | l, reg & ~3);
+}
+
+static unsigned int sdhci_bcm2708_get_max_clock(struct sdhci_host *host)
+{
+ return emmc_clock_freq;
+}
+
+/*****************************************************************************\
+ * *
+ * DMA Operation *
+ * *
+\*****************************************************************************/
+
+struct sdhci_bcm2708_priv {
+ int dma_chan;
+ int dma_irq;
+ void __iomem *dma_chan_base;
+ struct bcm2708_dma_cb *cb_base; /* DMA control blocks */
+ dma_addr_t cb_handle;
+ /* tracking scatter gather progress */
+ unsigned sg_ix; /* scatter gather list index */
+ unsigned sg_done; /* bytes in current sg_ix done */
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+ unsigned char dma_wanted; /* DMA transfer requested */
+ unsigned char dma_waits; /* wait states in DMAs */
+#ifdef CHECK_DMA_USE
+ unsigned char dmas_pending; /* no of unfinished DMAs */
+ hptime_t when_started;
+ hptime_t when_reset;
+ hptime_t when_stopped;
+#endif
+#endif
+ /* signalling the end of a transfer */
+ void (*complete)(struct sdhci_host *);
+};
+
+#define SDHCI_HOST_PRIV(host) \
+ (struct sdhci_bcm2708_priv *)((struct sdhci_host *)(host)+1)
+
+
+
+#ifdef CHECK_DMA_REG_USE
+static void check_dma_reg_use(struct sdhci_host *host, int reg)
+{
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+ if (host_priv->dma_wanted && reg != SDHCI_INT_STATUS) {
+ printk(KERN_INFO"%s: accessing register 0x%x during DMA\n",
+ mmc_hostname(host->mmc), reg);
+ }
+}
+#endif
+
+
+
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+
+static void sdhci_clear_set_irqgen(struct sdhci_host *host, u32 clear, u32 set)
+{
+ u32 ier;
+
+ ier = sdhci_bcm2708_raw_readl(host, SDHCI_SIGNAL_ENABLE);
+ ier &= ~clear;
+ ier |= set;
+ /* change which requests generate IRQs - makes no difference to
+ the content of SDHCI_INT_STATUS, or the need to acknowledge IRQs */
+ sdhci_bcm2708_raw_writel(host, ier, SDHCI_SIGNAL_ENABLE);
+}
+
+static void sdhci_signal_irqs(struct sdhci_host *host, u32 irqs)
+{
+ sdhci_clear_set_irqgen(host, 0, irqs);
+}
+
+static void sdhci_unsignal_irqs(struct sdhci_host *host, u32 irqs)
+{
+ sdhci_clear_set_irqgen(host, irqs, 0);
+}
+
+
+
+static void schci_bcm2708_cb_read(struct sdhci_bcm2708_priv *host,
+ int ix,
+ dma_addr_t dma_addr, unsigned len,
+ int /*bool*/ is_last)
+{
+ struct bcm2708_dma_cb *cb = &host->cb_base[ix];
+ unsigned char dmawaits = host->dma_waits;
+
+ cb->info = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_EMMC) |
+ BCM2708_DMA_WAITS(dmawaits) |
+ BCM2708_DMA_S_DREQ |
+ BCM2708_DMA_D_WIDTH |
+ BCM2708_DMA_D_INC;
+ cb->src = DMA_SDHCI_BUFFER; /* DATA register DMA address */
+ cb->dst = dma_addr;
+ cb->length = len;
+ cb->stride = 0;
+
+ if (is_last) {
+ cb->info |= BCM2708_DMA_INT_EN |
+ BCM2708_DMA_WAIT_RESP;
+ cb->next = 0;
+ } else
+ cb->next = host->cb_handle +
+ (ix+1)*sizeof(struct bcm2708_dma_cb);
+
+ cb->pad[0] = 0;
+ cb->pad[1] = 0;
+}
+
+static void schci_bcm2708_cb_write(struct sdhci_bcm2708_priv *host,
+ int ix,
+ dma_addr_t dma_addr, unsigned len,
+ int /*bool*/ is_last)
+{
+ struct bcm2708_dma_cb *cb = &host->cb_base[ix];
+ unsigned char dmawaits = host->dma_waits;
+
+ /* We can make arbitrarily large writes as long as we specify DREQ to
+ pace the delivery of bytes to the Arasan hardware */
+ cb->info = BCM2708_DMA_PER_MAP(BCM2708_DMA_DREQ_EMMC) |
+ BCM2708_DMA_WAITS(dmawaits) |
+ BCM2708_DMA_D_DREQ |
+ BCM2708_DMA_S_WIDTH |
+ BCM2708_DMA_S_INC;
+ cb->src = dma_addr;
+ cb->dst = DMA_SDHCI_BUFFER; /* DATA register DMA address */
+ cb->length = len;
+ cb->stride = 0;
+
+ if (is_last) {
+ cb->info |= BCM2708_DMA_INT_EN |
+ BCM2708_DMA_WAIT_RESP;
+ cb->next = 0;
+ } else
+ cb->next = host->cb_handle +
+ (ix+1)*sizeof(struct bcm2708_dma_cb);
+
+ cb->pad[0] = 0;
+ cb->pad[1] = 0;
+}
+
+
+static void schci_bcm2708_dma_go(struct sdhci_host *host)
+{
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+ void __iomem *dma_chan_base = host_priv->dma_chan_base;
+
+ BUG_ON(host_priv->dma_wanted);
+#ifdef CHECK_DMA_USE
+ if (host_priv->dma_wanted)
+ printk(KERN_ERR "%s: DMA already in progress - "
+ "now %"FMT_HPT", last started %lu "
+ "reset %lu stopped %lu\n",
+ mmc_hostname(host->mmc),
+ hptime(), since_ns(host_priv->when_started),
+ since_ns(host_priv->when_reset),
+ since_ns(host_priv->when_stopped));
+ else if (host_priv->dmas_pending > 0)
+ printk(KERN_INFO "%s: note - new DMA when %d reset DMAs "
+ "already in progress - "
+ "now %"FMT_HPT", started %lu reset %lu stopped %lu\n",
+ mmc_hostname(host->mmc),
+ host_priv->dmas_pending,
+ hptime(), since_ns(host_priv->when_started),
+ since_ns(host_priv->when_reset),
+ since_ns(host_priv->when_stopped));
+ host_priv->dmas_pending += 1;
+ host_priv->when_started = hptime();
+#endif
+ host_priv->dma_wanted = 1;
+ DBG("PDMA go - base %p handle %08X\n", dma_chan_base,
+ host_priv->cb_handle);
+ bcm_dma_start(dma_chan_base, host_priv->cb_handle);
+}
+
+
+static void
+sdhci_platdma_read(struct sdhci_host *host, dma_addr_t dma_addr, size_t len)
+{
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+
+ DBG("PDMA to read %d bytes\n", len);
+ host_priv->sg_done += len;
+ schci_bcm2708_cb_read(host_priv, 0, dma_addr, len, 1/*TRUE*/);
+ schci_bcm2708_dma_go(host);
+}
+
+
+static void
+sdhci_platdma_write(struct sdhci_host *host, dma_addr_t dma_addr, size_t len)
+{
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+
+ DBG("PDMA to write %d bytes\n", len);
+ //BUG_ON(0 != (len & 0x1ff));
+
+ host_priv->sg_done += len;
+ schci_bcm2708_cb_write(host_priv, 0, dma_addr, len, 1/*TRUE*/);
+ schci_bcm2708_dma_go(host);
+}
+
+/*! space is avaiable to receive into or data is available to write
+ Platform DMA exported function
+*/
+void
+sdhci_bcm2708_platdma_avail(struct sdhci_host *host, unsigned int *ref_intmask,
+ void(*completion_callback)(struct sdhci_host *host))
+{
+ struct mmc_data *data = host->data;
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+ int sg_ix;
+ size_t bytes;
+ dma_addr_t addr;
+
+ BUG_ON(NULL == data);
+ BUG_ON(0 == data->blksz);
+
+ host_priv->complete = completion_callback;
+
+ sg_ix = host_priv->sg_ix;
+ BUG_ON(sg_ix >= data->sg_len);
+
+ /* we can DMA blocks larger than blksz - it may hang the DMA
+ channel but we are its only user */
+ bytes = sg_dma_len(&data->sg[sg_ix]) - host_priv->sg_done;
+ addr = sg_dma_address(&data->sg[sg_ix]) + host_priv->sg_done;
+
+ if (bytes > 0) {
+ /* We're going to poll for read/write available state until
+ we finish this DMA
+ */
+
+ if (data->flags & MMC_DATA_READ) {
+ if (*ref_intmask & SDHCI_INT_DATA_AVAIL) {
+ sdhci_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL |
+ SDHCI_INT_SPACE_AVAIL);
+ sdhci_platdma_read(host, addr, bytes);
+ }
+ } else {
+ if (*ref_intmask & SDHCI_INT_SPACE_AVAIL) {
+ sdhci_unsignal_irqs(host, SDHCI_INT_DATA_AVAIL |
+ SDHCI_INT_SPACE_AVAIL);
+ sdhci_platdma_write(host, addr, bytes);
+ }
+ }
+ }
+ /* else:
+ we have run out of bytes that need transferring (e.g. we may be in
+ the middle of the last DMA transfer), or
+ it is also possible that we've been called when another IRQ is
+ signalled, even though we've turned off signalling of our own IRQ */
+
+ *ref_intmask &= ~SDHCI_INT_DATA_END;
+ /* don't let the main sdhci driver act on this .. we'll deal with it
+ when we respond to the DMA - if one is currently in progress */
+}
+
+/* is it possible to DMA the given mmc_data structure?
+ Platform DMA exported function
+*/
+int /*bool*/
+sdhci_bcm2708_platdma_dmaable(struct sdhci_host *host, struct mmc_data *data)
+{
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+ int ok = bcm_sg_suitable_for_dma(data->sg, data->sg_len);
+
+ if (!ok)
+ DBG("Reverting to PIO - bad cache alignment\n");
+
+ else {
+ host_priv->sg_ix = 0; /* first SG index */
+ host_priv->sg_done = 0; /* no bytes done */
+ }
+
+ return ok;
+}
+
+#include <mach/arm_control.h> //GRAYG
+/*! the current SD transacton has been abandonned
+ We need to tidy up if we were in the middle of a DMA
+ Platform DMA exported function
+*/
+void
+sdhci_bcm2708_platdma_reset(struct sdhci_host *host, struct mmc_data *data)
+{
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+// unsigned long flags;
+
+ BUG_ON(NULL == host);
+
+// spin_lock_irqsave(&host->lock, flags);
+
+ if (host_priv->dma_wanted) {
+ if (NULL == data) {
+ printk(KERN_ERR "%s: ongoing DMA reset - no data!\n",
+ mmc_hostname(host->mmc));
+ BUG_ON(NULL == data);
+ } else {
+ struct scatterlist *sg;
+ int sg_len;
+ int sg_todo;
+ int rc;
+ unsigned long cs;
+
+ sg = data->sg;
+ sg_len = data->sg_len;
+ sg_todo = sg_dma_len(&sg[host_priv->sg_ix]);
+
+ cs = readl(host_priv->dma_chan_base + BCM2708_DMA_CS);
+
+ if (!(BCM2708_DMA_ACTIVE & cs))
+ {
+ if (extra_messages)
+ printk(KERN_INFO "%s: missed completion of "
+ "cmd %d DMA (%d/%d [%d]/[%d]) - "
+ "ignoring it\n",
+ mmc_hostname(host->mmc),
+ host->last_cmdop,
+ host_priv->sg_done, sg_todo,
+ host_priv->sg_ix+1, sg_len);
+ }
+ else
+ printk(KERN_INFO "%s: resetting ongoing cmd %d"
+ "DMA before %d/%d [%d]/[%d] complete\n",
+ mmc_hostname(host->mmc),
+ host->last_cmdop,
+ host_priv->sg_done, sg_todo,
+ host_priv->sg_ix+1, sg_len);
+#ifdef CHECK_DMA_USE
+ printk(KERN_INFO "%s: now %"FMT_HPT" started %lu "
+ "last reset %lu last stopped %lu\n",
+ mmc_hostname(host->mmc),
+ hptime(), since_ns(host_priv->when_started),
+ since_ns(host_priv->when_reset),
+ since_ns(host_priv->when_stopped));
+ { unsigned long info, debug;
+ void __iomem *base;
+ unsigned long pend0, pend1, pend2;
+
+ base = host_priv->dma_chan_base;
+ cs = readl(base + BCM2708_DMA_CS);
+ info = readl(base + BCM2708_DMA_INFO);
+ debug = readl(base + BCM2708_DMA_DEBUG);
+ printk(KERN_INFO "%s: DMA%d CS=%08lX TI=%08lX "
+ "DEBUG=%08lX\n",
+ mmc_hostname(host->mmc),
+ host_priv->dma_chan,
+ cs, info, debug);
+ pend0 = readl(__io_address(ARM_IRQ_PEND0));
+ pend1 = readl(__io_address(ARM_IRQ_PEND1));
+ pend2 = readl(__io_address(ARM_IRQ_PEND2));
+
+ printk(KERN_INFO "%s: PEND0=%08lX "
+ "PEND1=%08lX PEND2=%08lX\n",
+ mmc_hostname(host->mmc),
+ pend0, pend1, pend2);
+
+ //gintsts = readl(__io_address(GINTSTS));
+ //gintmsk = readl(__io_address(GINTMSK));
+ //printk(KERN_INFO "%s: USB GINTSTS=%08lX"
+ // "GINTMSK=%08lX\n",
+ // mmc_hostname(host->mmc), gintsts, gintmsk);
+ }
+#endif
+ rc = bcm_dma_abort(host_priv->dma_chan_base);
+ BUG_ON(rc != 0);
+ }
+ host_priv->dma_wanted = 0;
+#ifdef CHECK_DMA_USE
+ host_priv->when_reset = hptime();
+#endif
+ }
+
+// spin_unlock_irqrestore(&host->lock, flags);
+}
+
+
+static void sdhci_bcm2708_dma_complete_irq(struct sdhci_host *host,
+ u32 dma_cs)
+{
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+ struct mmc_data *data;
+ struct scatterlist *sg;
+ int sg_len;
+ int sg_ix;
+ int sg_todo;
+// unsigned long flags;
+
+ BUG_ON(NULL == host);
+
+// spin_lock_irqsave(&host->lock, flags);
+ data = host->data;
+
+#ifdef CHECK_DMA_USE
+ if (host_priv->dmas_pending <= 0)
+ DBG("on completion no DMA in progress - "
+ "now %"FMT_HPT" started %lu reset %lu stopped %lu\n",
+ hptime(), since_ns(host_priv->when_started),
+ since_ns(host_priv->when_reset),
+ since_ns(host_priv->when_stopped));
+ else if (host_priv->dmas_pending > 1)
+ DBG("still %d DMA in progress after completion - "
+ "now %"FMT_HPT" started %lu reset %lu stopped %lu\n",
+ host_priv->dmas_pending - 1,
+ hptime(), since_ns(host_priv->when_started),
+ since_ns(host_priv->when_reset),
+ since_ns(host_priv->when_stopped));
+ BUG_ON(host_priv->dmas_pending <= 0);
+ host_priv->dmas_pending -= 1;
+ host_priv->when_stopped = hptime();
+#endif
+ host_priv->dma_wanted = 0;
+
+ if (NULL == data) {
+ DBG("PDMA unused completion - status 0x%X\n", dma_cs);
+// spin_unlock_irqrestore(&host->lock, flags);
+ return;
+ }
+ sg = data->sg;
+ sg_len = data->sg_len;
+ sg_todo = sg_dma_len(&sg[host_priv->sg_ix]);
+
+ DBG("PDMA complete %d/%d [%d]/[%d]..\n",
+ host_priv->sg_done, sg_todo,
+ host_priv->sg_ix+1, sg_len);
+
+ BUG_ON(host_priv->sg_done > sg_todo);
+
+ if (host_priv->sg_done >= sg_todo) {
+ host_priv->sg_ix++;
+ host_priv->sg_done = 0;
+ }
+
+ sg_ix = host_priv->sg_ix;
+ if (sg_ix < sg_len) {
+ u32 irq_mask;
+ /* Set off next DMA if we've got the capacity */
+
+ if (data->flags & MMC_DATA_READ)
+ irq_mask = SDHCI_INT_DATA_AVAIL;
+ else
+ irq_mask = SDHCI_INT_SPACE_AVAIL;
+
+ /* We have to use the interrupt status register on the BCM2708
+ rather than the SDHCI_PRESENT_STATE register because latency
+ in the glue logic means that the information retrieved from
+ the latter is not always up-to-date w.r.t the DMA engine -
+ it may not indicate that a read or a write is ready yet */
+ if (sdhci_bcm2708_raw_readl(host, SDHCI_INT_STATUS) &
+ irq_mask) {
+ size_t bytes = sg_dma_len(&sg[sg_ix]) -
+ host_priv->sg_done;
+ dma_addr_t addr = sg_dma_address(&data->sg[sg_ix]) +
+ host_priv->sg_done;
+
+ /* acknowledge interrupt */
+ sdhci_bcm2708_raw_writel(host, irq_mask,
+ SDHCI_INT_STATUS);
+
+ BUG_ON(0 == bytes);
+
+ if (data->flags & MMC_DATA_READ)
+ sdhci_platdma_read(host, addr, bytes);
+ else
+ sdhci_platdma_write(host, addr, bytes);
+ } else {
+ DBG("PDMA - wait avail\n");
+ /* may generate an IRQ if already present */
+ sdhci_signal_irqs(host, SDHCI_INT_DATA_AVAIL |
+ SDHCI_INT_SPACE_AVAIL);
+ }
+ } else {
+ if (sync_after_dma) {
+ /* On the Arasan controller the stop command (which will be
+ scheduled after this completes) does not seem to work
+ properly if we allow it to be issued when we are
+ transferring data to/from the SD card.
+ We get CRC and DEND errors unless we wait for
+ the SD controller to finish reading/writing to the card. */
+ u32 state_mask;
+ int timeout=30*5000;
+
+ DBG("PDMA over - sync card\n");
+ if (data->flags & MMC_DATA_READ)
+ state_mask = SDHCI_DOING_READ;
+ else
+ state_mask = SDHCI_DOING_WRITE;
+
+ while (0 != (sdhci_bcm2708_raw_readl(host, SDHCI_PRESENT_STATE)
+ & state_mask) && --timeout > 0)
+ {
+ udelay(1);
+ continue;
+ }
+ if (timeout <= 0)
+ printk(KERN_ERR"%s: final %s to SD card still "
+ "running\n",
+ mmc_hostname(host->mmc),
+ data->flags & MMC_DATA_READ? "read": "write");
+ }
+ if (host_priv->complete) {
+ (*host_priv->complete)(host);
+ DBG("PDMA %s complete\n",
+ data->flags & MMC_DATA_READ?"read":"write");
+ sdhci_signal_irqs(host, SDHCI_INT_DATA_AVAIL |
+ SDHCI_INT_SPACE_AVAIL);
+ }
+ }
+// spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static irqreturn_t sdhci_bcm2708_dma_irq(int irq, void *dev_id)
+{
+ irqreturn_t result = IRQ_NONE;
+ struct sdhci_host *host = dev_id;
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+ u32 dma_cs; /* control and status register */
+
+ BUG_ON(NULL == dev_id);
+ BUG_ON(NULL == host_priv->dma_chan_base);
+
+ sdhci_spin_lock(host);
+
+ dma_cs = readl(host_priv->dma_chan_base + BCM2708_DMA_CS);
+
+ if (dma_cs & BCM2708_DMA_ERR) {
+ unsigned long debug;
+ debug = readl(host_priv->dma_chan_base +
+ BCM2708_DMA_DEBUG);
+ printk(KERN_ERR "%s: DMA error - CS %lX DEBUG %lX\n",
+ mmc_hostname(host->mmc), (unsigned long)dma_cs,
+ (unsigned long)debug);
+ /* reset error */
+ writel(debug, host_priv->dma_chan_base +
+ BCM2708_DMA_DEBUG);
+ }
+ if (dma_cs & BCM2708_DMA_INT) {
+ /* acknowledge interrupt */
+ writel(BCM2708_DMA_INT,
+ host_priv->dma_chan_base + BCM2708_DMA_CS);
+
+ dsb(); /* ARM data synchronization (push) operation */
+
+ if (!host_priv->dma_wanted) {
+ /* ignore this interrupt - it was reset */
+ if (extra_messages)
+ printk(KERN_INFO "%s: DMA IRQ %X ignored - "
+ "results were reset\n",
+ mmc_hostname(host->mmc), dma_cs);
+#ifdef CHECK_DMA_USE
+ printk(KERN_INFO "%s: now %"FMT_HPT
+ " started %lu reset %lu stopped %lu\n",
+ mmc_hostname(host->mmc), hptime(),
+ since_ns(host_priv->when_started),
+ since_ns(host_priv->when_reset),
+ since_ns(host_priv->when_stopped));
+ host_priv->dmas_pending--;
+#endif
+ } else
+ sdhci_bcm2708_dma_complete_irq(host, dma_cs);
+
+ result = IRQ_HANDLED;
+ }
+ sdhci_spin_unlock(host);
+
+ return result;
+}
+#endif /* CONFIG_MMC_SDHCI_BCM2708_DMA */
+
+
+/***************************************************************************** \
+ * *
+ * Device Attributes *
+ * *
+\*****************************************************************************/
+
+
+/**
+ * Show the DMA-using status
+ */
+static ssize_t attr_dma_show(struct device *_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
+
+ if (host) {
+ int use_dma = (host->flags & SDHCI_USE_PLATDMA? 1:0);
+ return sprintf(buf, "%d\n", use_dma);
+ } else
+ return -EINVAL;
+}
+
+/**
+ * Set the DMA-using status
+ */
+static ssize_t attr_dma_store(struct device *_dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
+
+ if (host) {
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+ int on = simple_strtol(buf, NULL, 0);
+ if (on) {
+ host->flags |= SDHCI_USE_PLATDMA;
+ sdhci_bcm2708_writel(host, 1, REG_EXRDFIFO_EN);
+ printk(KERN_INFO "%s: DMA enabled\n",
+ mmc_hostname(host->mmc));
+ } else {
+ host->flags &= ~(SDHCI_USE_PLATDMA | SDHCI_REQ_USE_DMA);
+ sdhci_bcm2708_writel(host, 0, REG_EXRDFIFO_EN);
+ printk(KERN_INFO "%s: DMA disabled\n",
+ mmc_hostname(host->mmc));
+ }
+#endif
+ return count;
+ } else
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(use_dma, S_IRUGO | S_IWUGO, attr_dma_show, attr_dma_store);
+
+
+/**
+ * Show the DMA wait states used
+ */
+static ssize_t attr_dmawait_show(struct device *_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
+
+ if (host) {
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+ int dmawait = host_priv->dma_waits;
+ return sprintf(buf, "%d\n", dmawait);
+ } else
+ return -EINVAL;
+}
+
+/**
+ * Set the DMA wait state used
+ */
+static ssize_t attr_dmawait_store(struct device *_dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
+
+ if (host) {
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+ int dma_waits = simple_strtol(buf, NULL, 0);
+ if (dma_waits >= 0 && dma_waits < 32)
+ host_priv->dma_waits = dma_waits;
+ else
+ printk(KERN_ERR "%s: illegal dma_waits value - %d",
+ mmc_hostname(host->mmc), dma_waits);
+#endif
+ return count;
+ } else
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(dma_wait, S_IRUGO | S_IWUGO,
+ attr_dmawait_show, attr_dmawait_store);
+
+
+/**
+ * Show the DMA-using status
+ */
+static ssize_t attr_status_show(struct device *_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct sdhci_host *host = (struct sdhci_host *)dev_get_drvdata(_dev);
+
+ if (host) {
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+ return sprintf(buf,
+ "present: yes\n"
+ "power: %s\n"
+ "clock: %u Hz\n"
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+ "dma: %s (%d waits)\n",
+#else
+ "dma: unconfigured\n",
+#endif
+ "always on",
+ host->clock
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+ , (host->flags & SDHCI_USE_PLATDMA)? "on": "off"
+ , host_priv->dma_waits
+#endif
+ );
+ } else
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(status, S_IRUGO, attr_status_show, NULL);
+
+/***************************************************************************** \
+ * *
+ * Power Management *
+ * *
+\*****************************************************************************/
+
+
+#ifdef CONFIG_PM
+static int sdhci_bcm2708_suspend(struct platform_device *dev, pm_message_t state)
+{
+ struct sdhci_host *host = (struct sdhci_host *)
+ platform_get_drvdata(dev);
+ int ret = 0;
+
+ if (host->mmc) {
+ ret = mmc_suspend_host(host->mmc);
+ }
+
+ return ret;
+}
+
+static int sdhci_bcm2708_resume(struct platform_device *dev)
+{
+ struct sdhci_host *host = (struct sdhci_host *)
+ platform_get_drvdata(dev);
+ int ret = 0;
+
+ if (host->mmc) {
+ ret = mmc_resume_host(host->mmc);
+ }
+
+ return ret;
+}
+#endif
+
+
+/*****************************************************************************\
+ * *
+ * Device quirk functions. Implemented as local ops because the flags *
+ * field is out of space with newer kernels. This implementation can be *
+ * back ported to older kernels as well. *
+\****************************************************************************/
+static unsigned int sdhci_bcm2708_quirk_extra_ints(struct sdhci_host *host)
+{
+ return 1;
+}
+
+static unsigned int sdhci_bcm2708_quirk_spurious_crc_acmd51(struct sdhci_host *host)
+{
+ return 1;
+}
+
+static unsigned int sdhci_bcm2708_quirk_voltage_broken(struct sdhci_host *host)
+{
+ return 1;
+}
+
+static unsigned int sdhci_bcm2708_uhs_broken(struct sdhci_host *host)
+{
+ return 1;
+}
+
+static unsigned int sdhci_bcm2708_missing_status(struct sdhci_host *host)
+{
+ return 1;
+}
+
+/***************************************************************************** \
+ * *
+ * Device ops *
+ * *
+\*****************************************************************************/
+
+static struct sdhci_ops sdhci_bcm2708_ops = {
+#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
+ .read_l = sdhci_bcm2708_readl,
+ .read_w = sdhci_bcm2708_readw,
+ .read_b = sdhci_bcm2708_readb,
+ .write_l = sdhci_bcm2708_writel,
+ .write_w = sdhci_bcm2708_writew,
+ .write_b = sdhci_bcm2708_writeb,
+#else
+#error The BCM2708 SDHCI driver needs CONFIG_MMC_SDHCI_IO_ACCESSORS to be set
+#endif
+ .get_max_clock = sdhci_bcm2708_get_max_clock,
+
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+ // Platform DMA operations
+ .pdma_able = sdhci_bcm2708_platdma_dmaable,
+ .pdma_avail = sdhci_bcm2708_platdma_avail,
+ .pdma_reset = sdhci_bcm2708_platdma_reset,
+#endif
+ .extra_ints = sdhci_bcm2708_quirk_extra_ints,
+ .voltage_broken = sdhci_bcm2708_quirk_voltage_broken,
+ .uhs_broken = sdhci_bcm2708_uhs_broken,
+};
+
+/*****************************************************************************\
+ * *
+ * Device probing/removal *
+ * *
+\*****************************************************************************/
+
+static int sdhci_bcm2708_probe(struct platform_device *pdev)
+{
+ struct sdhci_host *host;
+ struct resource *iomem;
+ struct sdhci_bcm2708_priv *host_priv;
+ int ret;
+
+ BUG_ON(pdev == NULL);
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!iomem) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ if (resource_size(iomem) != 0x100)
+ dev_err(&pdev->dev, "Invalid iomem size. You may "
+ "experience problems.\n");
+
+ if (pdev->dev.parent)
+ host = sdhci_alloc_host(pdev->dev.parent,
+ sizeof(struct sdhci_bcm2708_priv));
+ else
+ host = sdhci_alloc_host(&pdev->dev,
+ sizeof(struct sdhci_bcm2708_priv));
+
+ if (IS_ERR(host)) {
+ ret = PTR_ERR(host);
+ goto err;
+ }
+ if (missing_status) {
+ sdhci_bcm2708_ops.missing_status = sdhci_bcm2708_missing_status;
+ }
+
+ if( spurious_crc_acmd51 ) {
+ sdhci_bcm2708_ops.spurious_crc_acmd51 = sdhci_bcm2708_quirk_spurious_crc_acmd51;
+ }
+
+
+ printk("sdhci: %s low-latency mode\n",enable_llm?"Enable":"Disable");
+
+ host->hw_name = "BCM2708_Arasan";
+ host->ops = &sdhci_bcm2708_ops;
+ host->irq = platform_get_irq(pdev, 0);
+ host->second_irq = 0;
+
+ host->quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
+ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+ SDHCI_QUIRK_MISSING_CAPS |
+ SDHCI_QUIRK_NO_HISPD_BIT |
+ (sync_after_dma ? 0:SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12);
+
+
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+ host->flags = SDHCI_USE_PLATDMA;
+#endif
+
+ if (!request_mem_region(iomem->start, resource_size(iomem),
+ mmc_hostname(host->mmc))) {
+ dev_err(&pdev->dev, "cannot request region\n");
+ ret = -EBUSY;
+ goto err_request;
+ }
+
+ host->ioaddr = ioremap(iomem->start, resource_size(iomem));
+ if (!host->ioaddr) {
+ dev_err(&pdev->dev, "failed to remap registers\n");
+ ret = -ENOMEM;
+ goto err_remap;
+ }
+
+ host_priv = SDHCI_HOST_PRIV(host);
+
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+ host_priv->dma_wanted = 0;
+#ifdef CHECK_DMA_USE
+ host_priv->dmas_pending = 0;
+ host_priv->when_started = 0;
+ host_priv->when_reset = 0;
+ host_priv->when_stopped = 0;
+#endif
+ host_priv->sg_ix = 0;
+ host_priv->sg_done = 0;
+ host_priv->complete = NULL;
+ host_priv->dma_waits = SDHCI_BCM_DMA_WAITS;
+
+ host_priv->cb_base = dma_alloc_writecombine(&pdev->dev, SZ_4K,
+ &host_priv->cb_handle,
+ GFP_KERNEL);
+ if (!host_priv->cb_base) {
+ dev_err(&pdev->dev, "cannot allocate DMA CBs\n");
+ ret = -ENOMEM;
+ goto err_alloc_cb;
+ }
+
+ ret = bcm_dma_chan_alloc(BCM_DMA_FEATURE_FAST,
+ &host_priv->dma_chan_base,
+ &host_priv->dma_irq);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "couldn't allocate a DMA channel\n");
+ goto err_add_dma;
+ }
+ host_priv->dma_chan = ret;
+
+ ret = request_irq(host_priv->dma_irq, sdhci_bcm2708_dma_irq,0,//IRQF_SHARED,
+ DRIVER_NAME " (dma)", host);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot set DMA IRQ\n");
+ goto err_add_dma_irq;
+ }
+ host->second_irq = host_priv->dma_irq;
+ DBG("DMA CBs %p handle %08X DMA%d %p DMA IRQ %d\n",
+ host_priv->cb_base, (unsigned)host_priv->cb_handle,
+ host_priv->dma_chan, host_priv->dma_chan_base,
+ host_priv->dma_irq);
+
+ if (allow_highspeed)
+ host->mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
+
+ /* single block writes cause data loss with some SD cards! */
+ host->mmc->caps2 |= MMC_CAP2_FORCE_MULTIBLOCK;
+#endif
+
+ ret = sdhci_add_host(host);
+ if (ret)
+ goto err_add_host;
+
+ platform_set_drvdata(pdev, host);
+ ret = device_create_file(&pdev->dev, &dev_attr_use_dma);
+ ret = device_create_file(&pdev->dev, &dev_attr_dma_wait);
+ ret = device_create_file(&pdev->dev, &dev_attr_status);
+
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+ /* enable extension fifo for paced DMA transfers */
+ sdhci_bcm2708_writel(host, 1, REG_EXRDFIFO_EN);
+ sdhci_bcm2708_writel(host, 4, REG_EXRDFIFO_CFG);
+#endif
+
+ printk(KERN_INFO "%s: BCM2708 SDHC host at 0x%08llx DMA %d IRQ %d\n",
+ mmc_hostname(host->mmc), (unsigned long long)iomem->start,
+ host_priv->dma_chan, host_priv->dma_irq);
+
+ return 0;
+
+err_add_host:
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+ free_irq(host_priv->dma_irq, host);
+err_add_dma_irq:
+ bcm_dma_chan_free(host_priv->dma_chan);
+err_add_dma:
+ dma_free_writecombine(&pdev->dev, SZ_4K, host_priv->cb_base,
+ host_priv->cb_handle);
+err_alloc_cb:
+#endif
+ iounmap(host->ioaddr);
+err_remap:
+ release_mem_region(iomem->start, resource_size(iomem));
+err_request:
+ sdhci_free_host(host);
+err:
+ dev_err(&pdev->dev, "probe failed, err %d\n", ret);
+ return ret;
+}
+
+static int sdhci_bcm2708_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct sdhci_bcm2708_priv *host_priv = SDHCI_HOST_PRIV(host);
+ int dead;
+ u32 scratch;
+
+ dead = 0;
+ scratch = sdhci_bcm2708_readl(host, SDHCI_INT_STATUS);
+ if (scratch == (u32)-1)
+ dead = 1;
+
+ device_remove_file(&pdev->dev, &dev_attr_status);
+ device_remove_file(&pdev->dev, &dev_attr_dma_wait);
+ device_remove_file(&pdev->dev, &dev_attr_use_dma);
+
+#ifdef CONFIG_MMC_SDHCI_BCM2708_DMA
+ free_irq(host_priv->dma_irq, host);
+ dma_free_writecombine(&pdev->dev, SZ_4K, host_priv->cb_base,
+ host_priv->cb_handle);
+#endif
+ sdhci_remove_host(host, dead);
+ iounmap(host->ioaddr);
+ release_mem_region(iomem->start, resource_size(iomem));
+ sdhci_free_host(host);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver sdhci_bcm2708_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = sdhci_bcm2708_probe,
+ .remove = sdhci_bcm2708_remove,
+
+#ifdef CONFIG_PM
+ .suspend = sdhci_bcm2708_suspend,
+ .resume = sdhci_bcm2708_resume,
+#endif
+
+};
+
+/*****************************************************************************\
+ * *
+ * Driver init/exit *
+ * *
+\*****************************************************************************/
+
+static int __init sdhci_drv_init(void)
+{
+ return platform_driver_register(&sdhci_bcm2708_driver);
+}
+
+static void __exit sdhci_drv_exit(void)
+{
+ platform_driver_unregister(&sdhci_bcm2708_driver);
+}
+
+module_init(sdhci_drv_init);
+module_exit(sdhci_drv_exit);
+
+module_param(allow_highspeed, bool, 0444);
+module_param(emmc_clock_freq, int, 0444);
+module_param(sync_after_dma, bool, 0444);
+module_param(missing_status, bool, 0444);
+module_param(spurious_crc_acmd51, bool, 0444);
+module_param(enable_llm, bool, 0444);
+module_param(cycle_delay, int, 0444);
+module_param(extra_messages, bool, 0444);
+
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface platform driver");
+MODULE_AUTHOR("Broadcom <info@broadcom.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:"DRIVER_NAME);
+
+MODULE_PARM_DESC(allow_highspeed, "Allow high speed transfers modes");
+MODULE_PARM_DESC(emmc_clock_freq, "Specify the speed of emmc clock");
+MODULE_PARM_DESC(sync_after_dma, "Block in driver until dma complete");
+MODULE_PARM_DESC(missing_status, "Use the missing status quirk");
+MODULE_PARM_DESC(spurious_crc_acmd51, "Use the spurious crc quirk for reading SCR (ACMD51)");
+MODULE_PARM_DESC(enable_llm, "Enable low-latency mode");
+MODULE_PARM_DESC(extra_messages, "Enable more sdcard warning messages");
+
+
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -28,6 +28,7 @@
#include <linux/mmc/mmc.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
+#include <linux/mmc/sd.h>
#include <linux/mmc/slot-gpio.h>
#include "sdhci.h"
@@ -123,6 +124,91 @@ static void sdhci_dumpregs(struct sdhci_
* Low level functions *
* *
\*****************************************************************************/
+extern bool enable_llm;
+static int sdhci_locked=0;
+void sdhci_spin_lock(struct sdhci_host *host)
+{
+ spin_lock(&host->lock);
+#ifdef CONFIG_PREEMPT
+ if(enable_llm)
+ {
+ disable_irq_nosync(host->irq);
+ if(host->second_irq)
+ disable_irq_nosync(host->second_irq);
+ local_irq_enable();
+ }
+#endif
+}
+
+void sdhci_spin_unlock(struct sdhci_host *host)
+{
+#ifdef CONFIG_PREEMPT
+ if(enable_llm)
+ {
+ local_irq_disable();
+ if(host->second_irq)
+ enable_irq(host->second_irq);
+ enable_irq(host->irq);
+ }
+#endif
+ spin_unlock(&host->lock);
+}
+
+void sdhci_spin_lock_irqsave(struct sdhci_host *host,unsigned long *flags)
+{
+#ifdef CONFIG_PREEMPT
+ if(enable_llm)
+ {
+ while(sdhci_locked)
+ {
+ preempt_schedule();
+ }
+ spin_lock_irqsave(&host->lock,*flags);
+ disable_irq(host->irq);
+ if(host->second_irq)
+ disable_irq(host->second_irq);
+ local_irq_enable();
+ }
+ else
+#endif
+ spin_lock_irqsave(&host->lock,*flags);
+}
+
+void sdhci_spin_unlock_irqrestore(struct sdhci_host *host,unsigned long flags)
+{
+#ifdef CONFIG_PREEMPT
+ if(enable_llm)
+ {
+ local_irq_disable();
+ if(host->second_irq)
+ enable_irq(host->second_irq);
+ enable_irq(host->irq);
+ }
+#endif
+ spin_unlock_irqrestore(&host->lock,flags);
+}
+
+static void sdhci_spin_enable_schedule(struct sdhci_host *host)
+{
+#ifdef CONFIG_PREEMPT
+ if(enable_llm)
+ {
+ sdhci_locked = 1;
+ preempt_enable();
+ }
+#endif
+}
+
+static void sdhci_spin_disable_schedule(struct sdhci_host *host)
+{
+#ifdef CONFIG_PREEMPT
+ if(enable_llm)
+ {
+ preempt_disable();
+ sdhci_locked = 0;
+ }
+#endif
+}
static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
{
@@ -288,7 +374,7 @@ static void sdhci_led_control(struct led
struct sdhci_host *host = container_of(led, struct sdhci_host, led);
unsigned long flags;
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
if (host->runtime_suspended)
goto out;
@@ -298,7 +384,7 @@ static void sdhci_led_control(struct led
else
sdhci_activate_led(host);
out:
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
}
#endif
@@ -315,7 +401,7 @@ static void sdhci_read_block_pio(struct
u32 uninitialized_var(scratch);
u8 *buf;
- DBG("PIO reading\n");
+ DBG("PIO reading %db\n", host->data->blksz);
blksize = host->data->blksz;
chunk = 0;
@@ -360,7 +446,7 @@ static void sdhci_write_block_pio(struct
u32 scratch;
u8 *buf;
- DBG("PIO writing\n");
+ DBG("PIO writing %db\n", host->data->blksz);
blksize = host->data->blksz;
chunk = 0;
@@ -399,19 +485,28 @@ static void sdhci_write_block_pio(struct
local_irq_restore(flags);
}
-static void sdhci_transfer_pio(struct sdhci_host *host)
+static void sdhci_transfer_pio(struct sdhci_host *host, u32 intstate)
{
u32 mask;
+ u32 state = 0;
+ u32 intmask;
+ int available;
BUG_ON(!host->data);
if (host->blocks == 0)
return;
- if (host->data->flags & MMC_DATA_READ)
+ if (host->data->flags & MMC_DATA_READ) {
mask = SDHCI_DATA_AVAILABLE;
- else
+ intmask = SDHCI_INT_DATA_AVAIL;
+ } else {
mask = SDHCI_SPACE_AVAILABLE;
+ intmask = SDHCI_INT_SPACE_AVAIL;
+ }
+
+ /* initially we can see whether we can procede using intstate */
+ available = (intstate & intmask);
/*
* Some controllers (JMicron JMB38x) mess up the buffer bits
@@ -422,7 +517,7 @@ static void sdhci_transfer_pio(struct sd
(host->data->blocks == 1))
mask = ~0;
- while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
+ while (available) {
if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
udelay(100);
@@ -434,9 +529,11 @@ static void sdhci_transfer_pio(struct sd
host->blocks--;
if (host->blocks == 0)
break;
+ state = sdhci_readl(host, SDHCI_PRESENT_STATE);
+ available = state & mask;
}
- DBG("PIO transfer complete.\n");
+ DBG("PIO transfer complete - %d blocks left.\n", host->blocks);
}
static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
@@ -709,7 +806,9 @@ static void sdhci_set_transfer_irqs(stru
u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
- if (host->flags & SDHCI_REQ_USE_DMA)
+ /* platform DMA will begin on receipt of PIO irqs */
+ if ((host->flags & SDHCI_REQ_USE_DMA) &&
+ !(host->flags & SDHCI_USE_PLATDMA))
sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
else
sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
@@ -741,44 +840,25 @@ static void sdhci_prepare_data(struct sd
host->data_early = 0;
host->data->bytes_xfered = 0;
- if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA | SDHCI_USE_PLATDMA))
host->flags |= SDHCI_REQ_USE_DMA;
/*
* FIXME: This doesn't account for merging when mapping the
* scatterlist.
*/
- if (host->flags & SDHCI_REQ_USE_DMA) {
- int broken, i;
- struct scatterlist *sg;
-
- broken = 0;
- if (host->flags & SDHCI_USE_ADMA) {
- if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
- broken = 1;
- } else {
- if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
- broken = 1;
- }
-
- if (unlikely(broken)) {
- for_each_sg(data->sg, sg, data->sg_len, i) {
- if (sg->length & 0x3) {
- DBG("Reverting to PIO because of "
- "transfer size (%d)\n",
- sg->length);
- host->flags &= ~SDHCI_REQ_USE_DMA;
- break;
- }
- }
- }
- }
/*
* The assumption here being that alignment is the same after
* translation to device address space.
*/
- if (host->flags & SDHCI_REQ_USE_DMA) {
+ if ((host->flags & (SDHCI_REQ_USE_DMA | SDHCI_USE_PLATDMA)) ==
+ (SDHCI_REQ_USE_DMA | SDHCI_USE_PLATDMA)) {
+
+ if (! sdhci_platdma_dmaable(host, data))
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+
+ } else if (host->flags & SDHCI_REQ_USE_DMA) {
int broken, i;
struct scatterlist *sg;
@@ -837,7 +917,8 @@ static void sdhci_prepare_data(struct sd
*/
WARN_ON(1);
host->flags &= ~SDHCI_REQ_USE_DMA;
- } else {
+ } else
+ if (!(host->flags & SDHCI_USE_PLATDMA)) {
WARN_ON(sg_cnt != 1);
sdhci_writel(host, sg_dma_address(data->sg),
SDHCI_DMA_ADDRESS);
@@ -853,11 +934,13 @@ static void sdhci_prepare_data(struct sd
if (host->version >= SDHCI_SPEC_200) {
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
ctrl &= ~SDHCI_CTRL_DMA_MASK;
+ if (! (host->flags & SDHCI_USE_PLATDMA)) {
if ((host->flags & SDHCI_REQ_USE_DMA) &&
(host->flags & SDHCI_USE_ADMA))
ctrl |= SDHCI_CTRL_ADMA32;
else
ctrl |= SDHCI_CTRL_SDMA;
+ }
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
}
@@ -909,7 +992,8 @@ static void sdhci_set_transfer_mode(stru
if (data->flags & MMC_DATA_READ)
mode |= SDHCI_TRNS_READ;
- if (host->flags & SDHCI_REQ_USE_DMA)
+ if ((host->flags & SDHCI_REQ_USE_DMA) &&
+ !(host->flags & SDHCI_USE_PLATDMA))
mode |= SDHCI_TRNS_DMA;
sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
@@ -925,13 +1009,16 @@ static void sdhci_finish_data(struct sdh
host->data = NULL;
if (host->flags & SDHCI_REQ_USE_DMA) {
- if (host->flags & SDHCI_USE_ADMA)
- sdhci_adma_table_post(host, data);
- else {
+ /* we may have to abandon an ongoing platform DMA */
+ if (host->flags & SDHCI_USE_PLATDMA)
+ sdhci_platdma_reset(host, data);
+
+ if (host->flags & (SDHCI_USE_PLATDMA | SDHCI_USE_SDMA)) {
dma_unmap_sg(mmc_dev(host->mmc), data->sg,
data->sg_len, (data->flags & MMC_DATA_READ) ?
DMA_FROM_DEVICE : DMA_TO_DEVICE);
- }
+ } else if (host->flags & SDHCI_USE_ADMA)
+ sdhci_adma_table_post(host, data);
}
/*
@@ -984,6 +1071,12 @@ static void sdhci_send_command(struct sd
if ((cmd->data != NULL) || (cmd->flags & MMC_RSP_BUSY))
mask |= SDHCI_DATA_INHIBIT;
+ if(host->ops->missing_status && (cmd->opcode == MMC_SEND_STATUS)) {
+ timeout = 5000; // Really obscenely large delay to send the status, due to bug in controller
+ // which might cause the STATUS command to get stuck when a data operation is in flow
+ mask |= SDHCI_DATA_INHIBIT;
+ }
+
/* We shouldn't wait for data inihibit for stop commands, even
though they might use busy signaling */
if (host->mrq->data && (cmd == host->mrq->data->stop))
@@ -999,12 +1092,20 @@ static void sdhci_send_command(struct sd
return;
}
timeout--;
+ sdhci_spin_enable_schedule(host);
mdelay(1);
+ sdhci_spin_disable_schedule(host);
}
+ DBG("send cmd %d - wait 0x%X irq 0x%x\n", cmd->opcode, mask,
+ sdhci_readl(host, SDHCI_INT_STATUS));
mod_timer(&host->timer, jiffies + 10 * HZ);
host->cmd = cmd;
+ if (host->last_cmdop == MMC_APP_CMD)
+ host->last_cmdop = -cmd->opcode;
+ else
+ host->last_cmdop = cmd->opcode;
sdhci_prepare_data(host, cmd);
@@ -1220,7 +1321,9 @@ clock_set:
return;
}
timeout--;
+ sdhci_spin_enable_schedule(host);
mdelay(1);
+ sdhci_spin_disable_schedule(host);
}
clk |= SDHCI_CLOCK_CARD_EN;
@@ -1316,7 +1419,7 @@ static void sdhci_request(struct mmc_hos
sdhci_runtime_pm_get(host);
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
WARN_ON(host->mrq != NULL);
@@ -1374,9 +1477,9 @@ static void sdhci_request(struct mmc_hos
mmc->card->type == MMC_TYPE_MMC ?
MMC_SEND_TUNING_BLOCK_HS200 :
MMC_SEND_TUNING_BLOCK;
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
sdhci_execute_tuning(mmc, tuning_opcode);
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
/* Restore original mmc_request structure */
host->mrq = mrq;
@@ -1390,7 +1493,7 @@ static void sdhci_request(struct mmc_hos
}
mmiowb();
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
}
static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
@@ -1399,10 +1502,10 @@ static void sdhci_do_set_ios(struct sdhc
int vdd_bit = -1;
u8 ctrl;
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
if (host->flags & SDHCI_DEVICE_DEAD) {
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
if (host->vmmc && ios->power_mode == MMC_POWER_OFF)
mmc_regulator_set_ocr(host->mmc, host->vmmc, 0);
return;
@@ -1429,9 +1532,9 @@ static void sdhci_do_set_ios(struct sdhc
vdd_bit = sdhci_set_power(host, ios->vdd);
if (host->vmmc && vdd_bit != -1) {
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd_bit);
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
}
if (host->ops->platform_send_init_74_clocks)
@@ -1470,7 +1573,7 @@ static void sdhci_do_set_ios(struct sdhc
else
ctrl &= ~SDHCI_CTRL_HISPD;
- if (host->version >= SDHCI_SPEC_300) {
+ if (host->version >= SDHCI_SPEC_300 && !(host->ops->uhs_broken)) {
u16 clk, ctrl_2;
/* In case of UHS-I modes, set High Speed Enable */
@@ -1569,7 +1672,7 @@ static void sdhci_do_set_ios(struct sdhc
sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
mmiowb();
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
}
static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
@@ -1617,7 +1720,7 @@ static int sdhci_check_ro(struct sdhci_h
unsigned long flags;
int is_readonly;
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
if (host->flags & SDHCI_DEVICE_DEAD)
is_readonly = 0;
@@ -1627,7 +1730,7 @@ static int sdhci_check_ro(struct sdhci_h
is_readonly = !(sdhci_readl(host, SDHCI_PRESENT_STATE)
& SDHCI_WRITE_PROTECT);
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
/* This quirk needs to be replaced by a callback-function later */
return host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT ?
@@ -1700,9 +1803,9 @@ static void sdhci_enable_sdio_irq(struct
struct sdhci_host *host = mmc_priv(mmc);
unsigned long flags;
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
sdhci_enable_sdio_irq_nolock(host, enable);
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
}
static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
@@ -2046,7 +2149,7 @@ static void sdhci_card_event(struct mmc_
struct sdhci_host *host = mmc_priv(mmc);
unsigned long flags;
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
/* Check host->mrq first in case we are runtime suspended */
if (host->mrq &&
@@ -2063,7 +2166,7 @@ static void sdhci_card_event(struct mmc_
tasklet_schedule(&host->finish_tasklet);
}
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
}
static const struct mmc_host_ops sdhci_ops = {
@@ -2102,14 +2205,14 @@ static void sdhci_tasklet_finish(unsigne
host = (struct sdhci_host*)param;
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
/*
* If this tasklet gets rescheduled while running, it will
* be run again afterwards but without any active request.
*/
if (!host->mrq) {
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
return;
}
@@ -2147,7 +2250,7 @@ static void sdhci_tasklet_finish(unsigne
#endif
mmiowb();
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
mmc_request_done(host->mmc, mrq);
sdhci_runtime_pm_put(host);
@@ -2160,11 +2263,11 @@ static void sdhci_timeout_timer(unsigned
host = (struct sdhci_host*)data;
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
if (host->mrq) {
pr_err("%s: Timeout waiting for hardware "
- "interrupt.\n", mmc_hostname(host->mmc));
+ "interrupt - cmd%d.\n", mmc_hostname(host->mmc), host->last_cmdop);
sdhci_dumpregs(host);
if (host->data) {
@@ -2181,7 +2284,7 @@ static void sdhci_timeout_timer(unsigned
}
mmiowb();
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
}
static void sdhci_tuning_timer(unsigned long data)
@@ -2191,11 +2294,11 @@ static void sdhci_tuning_timer(unsigned
host = (struct sdhci_host *)data;
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
host->flags |= SDHCI_NEEDS_RETUNING;
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
}
/*****************************************************************************\
@@ -2209,10 +2312,13 @@ static void sdhci_cmd_irq(struct sdhci_h
BUG_ON(intmask == 0);
if (!host->cmd) {
+ if (!(host->ops->extra_ints)) {
pr_err("%s: Got command interrupt 0x%08x even "
"though no command operation was in progress.\n",
mmc_hostname(host->mmc), (unsigned)intmask);
sdhci_dumpregs(host);
+ } else
+ DBG("cmd irq 0x%08x cmd complete\n", (unsigned)intmask);
return;
}
@@ -2282,6 +2388,19 @@ static void sdhci_show_adma_error(struct
static void sdhci_show_adma_error(struct sdhci_host *host) { }
#endif
+static void sdhci_data_end(struct sdhci_host *host)
+{
+ if (host->cmd) {
+ /*
+ * Data managed to finish before the
+ * command completed. Make sure we do
+ * things in the proper order.
+ */
+ host->data_early = 1;
+ } else
+ sdhci_finish_data(host);
+}
+
static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
{
u32 command;
@@ -2311,23 +2430,39 @@ static void sdhci_data_irq(struct sdhci_
}
}
+ if (!(host->ops->extra_ints)) {
pr_err("%s: Got data interrupt 0x%08x even "
"though no data operation was in progress.\n",
mmc_hostname(host->mmc), (unsigned)intmask);
sdhci_dumpregs(host);
+ } else
+ DBG("data irq 0x%08x but no data\n", (unsigned)intmask);
return;
}
if (intmask & SDHCI_INT_DATA_TIMEOUT)
host->data->error = -ETIMEDOUT;
- else if (intmask & SDHCI_INT_DATA_END_BIT)
+ else if (intmask & SDHCI_INT_DATA_END_BIT) {
+ DBG("end error in cmd %d\n", host->last_cmdop);
+ if (host->ops->spurious_crc_acmd51 &&
+ host->last_cmdop == -SD_APP_SEND_SCR) {
+ DBG("ignoring spurious data_end_bit error\n");
+ intmask = SDHCI_INT_DATA_AVAIL|SDHCI_INT_DATA_END;
+ } else
host->data->error = -EILSEQ;
- else if ((intmask & SDHCI_INT_DATA_CRC) &&
+ } else if ((intmask & SDHCI_INT_DATA_CRC) &&
SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
- != MMC_BUS_TEST_R)
+ != MMC_BUS_TEST_R) {
+ DBG("crc error in cmd %d\n", host->last_cmdop);
+ if (host->ops->spurious_crc_acmd51 &&
+ host->last_cmdop == -SD_APP_SEND_SCR) {
+ DBG("ignoring spurious data_crc_bit error\n");
+ intmask = SDHCI_INT_DATA_AVAIL|SDHCI_INT_DATA_END;
+ } else {
host->data->error = -EILSEQ;
- else if (intmask & SDHCI_INT_ADMA_ERROR) {
+ }
+ } else if (intmask & SDHCI_INT_ADMA_ERROR) {
pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
sdhci_show_adma_error(host);
host->data->error = -EIO;
@@ -2335,11 +2470,18 @@ static void sdhci_data_irq(struct sdhci_
host->ops->adma_workaround(host, intmask);
}
- if (host->data->error)
+ if (host->data->error) {
+ DBG("finish request early on error %d\n", host->data->error);
sdhci_finish_data(host);
- else {
- if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL))
- sdhci_transfer_pio(host);
+ } else {
+ if (intmask & (SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL)) {
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+ /* possible only in PLATDMA mode */
+ sdhci_platdma_avail(host, &intmask,
+ &sdhci_data_end);
+ } else
+ sdhci_transfer_pio(host, intmask);
+ }
/*
* We currently don't do anything fancy with DMA
@@ -2368,18 +2510,8 @@ static void sdhci_data_irq(struct sdhci_
sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
}
- if (intmask & SDHCI_INT_DATA_END) {
- if (host->cmd) {
- /*
- * Data managed to finish before the
- * command completed. Make sure we do
- * things in the proper order.
- */
- host->data_early = 1;
- } else {
- sdhci_finish_data(host);
- }
- }
+ if (intmask & SDHCI_INT_DATA_END)
+ sdhci_data_end(host);
}
}
@@ -2390,10 +2522,10 @@ static irqreturn_t sdhci_irq(int irq, vo
u32 intmask, unexpected = 0;
int cardint = 0, max_loops = 16;
- spin_lock(&host->lock);
+ sdhci_spin_lock(host);
if (host->runtime_suspended) {
- spin_unlock(&host->lock);
+ sdhci_spin_unlock(host);
pr_warning("%s: got irq while runtime suspended\n",
mmc_hostname(host->mmc));
return IRQ_HANDLED;
@@ -2435,6 +2567,22 @@ again:
tasklet_schedule(&host->card_tasklet);
}
+ if (intmask & SDHCI_INT_ERROR_MASK & ~SDHCI_INT_ERROR)
+ DBG("controller reports error 0x%x -"
+ "%s%s%s%s%s%s%s%s%s%s",
+ intmask,
+ intmask & SDHCI_INT_TIMEOUT? " timeout": "",
+ intmask & SDHCI_INT_CRC ? " crc": "",
+ intmask & SDHCI_INT_END_BIT? " endbit": "",
+ intmask & SDHCI_INT_INDEX? " index": "",
+ intmask & SDHCI_INT_DATA_TIMEOUT? " data_timeout": "",
+ intmask & SDHCI_INT_DATA_CRC? " data_crc": "",
+ intmask & SDHCI_INT_DATA_END_BIT? " data_endbit": "",
+ intmask & SDHCI_INT_BUS_POWER? " buspower": "",
+ intmask & SDHCI_INT_ACMD12ERR? " acmd12": "",
+ intmask & SDHCI_INT_ADMA_ERROR? " adma": ""
+ );
+
if (intmask & SDHCI_INT_CMD_MASK) {
sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
SDHCI_INT_STATUS);
@@ -2449,7 +2597,13 @@ again:
intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
- intmask &= ~SDHCI_INT_ERROR;
+ if (intmask & SDHCI_INT_ERROR_MASK) {
+ /* collect any uncovered errors */
+ sdhci_writel(host, intmask & SDHCI_INT_ERROR_MASK,
+ SDHCI_INT_STATUS);
+ }
+
+ intmask &= ~SDHCI_INT_ERROR_MASK;
if (intmask & SDHCI_INT_BUS_POWER) {
pr_err("%s: Card is consuming too much power!\n",
@@ -2475,7 +2629,7 @@ again:
if (intmask && --max_loops)
goto again;
out:
- spin_unlock(&host->lock);
+ sdhci_spin_unlock(host);
if (unexpected) {
pr_err("%s: Unexpected interrupt 0x%08x.\n",
@@ -2569,7 +2723,8 @@ int sdhci_resume_host(struct sdhci_host
{
int ret;
- if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA |
+ SDHCI_USE_PLATDMA)) {
if (host->ops->enable_dma)
host->ops->enable_dma(host);
}
@@ -2636,15 +2791,15 @@ int sdhci_runtime_suspend_host(struct sd
host->flags &= ~SDHCI_NEEDS_RETUNING;
}
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
sdhci_mask_irqs(host, SDHCI_INT_ALL_MASK);
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
synchronize_irq(host->irq);
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
host->runtime_suspended = true;
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
return ret;
}
@@ -2670,16 +2825,16 @@ int sdhci_runtime_resume_host(struct sdh
sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios);
if ((host_flags & SDHCI_PV_ENABLED) &&
!(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) {
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
sdhci_enable_preset_value(host, true);
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
}
/* Set the re-tuning expiration flag */
if (host->flags & SDHCI_USING_RETUNING_TIMER)
host->flags |= SDHCI_NEEDS_RETUNING;
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
host->runtime_suspended = false;
@@ -2690,7 +2845,7 @@ int sdhci_runtime_resume_host(struct sdh
/* Enable Card Detection */
sdhci_enable_card_detection(host);
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
return ret;
}
@@ -2785,14 +2940,16 @@ int sdhci_add_host(struct sdhci_host *ho
host->flags &= ~SDHCI_USE_ADMA;
}
- if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA |
+ SDHCI_USE_PLATDMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
pr_warning("%s: No suitable DMA "
"available. Falling back to PIO.\n",
mmc_hostname(mmc));
host->flags &=
- ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
+ ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA |
+ SDHCI_USE_PLATDMA);
}
}
}
@@ -3080,6 +3237,12 @@ int sdhci_add_host(struct sdhci_host *ho
SDHCI_MAX_CURRENT_MULTIPLIER;
}
+ if(host->ops->voltage_broken) {
+ ocr_avail |= MMC_VDD_32_33 | MMC_VDD_33_34;
+ // Cannot support UHS modes if we are stuck at 3.3V;
+ mmc->caps &= ~(MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | MMC_CAP_UHS_SDR104 | MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_DDR50);
+ }
+
mmc->ocr_avail = ocr_avail;
mmc->ocr_avail_sdio = ocr_avail;
if (host->ocr_avail_sdio)
@@ -3174,7 +3337,7 @@ int sdhci_add_host(struct sdhci_host *ho
host->tuning_timer.function = sdhci_tuning_timer;
}
- ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
+ ret = request_irq(host->irq, sdhci_irq, 0,//IRQF_SHARED,
mmc_hostname(mmc), host);
if (ret) {
pr_err("%s: Failed to request IRQ %d: %d\n",
@@ -3210,6 +3373,7 @@ int sdhci_add_host(struct sdhci_host *ho
pr_info("%s: SDHCI controller on %s [%s] using %s\n",
mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
+ (host->flags & SDHCI_USE_PLATDMA) ? "platform's DMA" :
(host->flags & SDHCI_USE_ADMA) ? "ADMA" :
(host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
@@ -3237,7 +3401,7 @@ void sdhci_remove_host(struct sdhci_host
unsigned long flags;
if (dead) {
- spin_lock_irqsave(&host->lock, flags);
+ sdhci_spin_lock_irqsave(host, &flags);
host->flags |= SDHCI_DEVICE_DEAD;
@@ -3249,7 +3413,7 @@ void sdhci_remove_host(struct sdhci_host
tasklet_schedule(&host->finish_tasklet);
}
- spin_unlock_irqrestore(&host->lock, flags);
+ sdhci_spin_unlock_irqrestore(host, flags);
}
sdhci_disable_card_detection(host);
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -289,6 +289,20 @@ struct sdhci_ops {
void (*platform_reset_enter)(struct sdhci_host *host, u8 mask);
void (*platform_reset_exit)(struct sdhci_host *host, u8 mask);
int (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs);
+
+ int (*pdma_able)(struct sdhci_host *host,
+ struct mmc_data *data);
+ void (*pdma_avail)(struct sdhci_host *host,
+ unsigned int *ref_intmask,
+ void(*complete)(struct sdhci_host *));
+ void (*pdma_reset)(struct sdhci_host *host,
+ struct mmc_data *data);
+ unsigned int (*extra_ints)(struct sdhci_host *host);
+ unsigned int (*spurious_crc_acmd51)(struct sdhci_host *host);
+ unsigned int (*voltage_broken)(struct sdhci_host *host);
+ unsigned int (*uhs_broken)(struct sdhci_host *host);
+ unsigned int (*missing_status)(struct sdhci_host *host);
+
void (*hw_reset)(struct sdhci_host *host);
void (*platform_suspend)(struct sdhci_host *host);
void (*platform_resume)(struct sdhci_host *host);
@@ -399,9 +413,38 @@ extern int sdhci_resume_host(struct sdhc
extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
#endif
+static inline int /*bool*/
+sdhci_platdma_dmaable(struct sdhci_host *host, struct mmc_data *data)
+{
+ if (host->ops->pdma_able)
+ return host->ops->pdma_able(host, data);
+ else
+ return 1;
+}
+static inline void
+sdhci_platdma_avail(struct sdhci_host *host, unsigned int *ref_intmask,
+ void(*completion_callback)(struct sdhci_host *))
+{
+ if (host->ops->pdma_avail)
+ host->ops->pdma_avail(host, ref_intmask, completion_callback);
+}
+
+static inline void
+sdhci_platdma_reset(struct sdhci_host *host, struct mmc_data *data)
+{
+ if (host->ops->pdma_reset)
+ host->ops->pdma_reset(host, data);
+}
+
#ifdef CONFIG_PM_RUNTIME
extern int sdhci_runtime_suspend_host(struct sdhci_host *host);
extern int sdhci_runtime_resume_host(struct sdhci_host *host);
#endif
+extern void sdhci_spin_lock_irqsave(struct sdhci_host *host,unsigned long *flags);
+extern void sdhci_spin_unlock_irqrestore(struct sdhci_host *host,unsigned long flags);
+extern void sdhci_spin_lock(struct sdhci_host *host);
+extern void sdhci_spin_unlock(struct sdhci_host *host);
+
+
#endif /* __SDHCI_HW_H */
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -281,6 +281,7 @@ struct mmc_host {
#define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \
MMC_CAP2_PACKED_WR)
#define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */
+#define MMC_CAP2_FORCE_MULTIBLOCK (1 << 31) /* Always use multiblock transfers */
mmc_pm_flag_t pm_caps; /* supported pm features */
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -97,6 +97,7 @@ struct sdhci_host {
#define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3)
int irq; /* Device IRQ */
+ int second_irq; /* Additional IRQ to disable/enable in low-latency mode */
void __iomem *ioaddr; /* Mapped address */
const struct sdhci_ops *ops; /* Low level hw interface */
@@ -128,6 +129,7 @@ struct sdhci_host {
#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
#define SDHCI_HS200_NEEDS_TUNING (1<<10) /* HS200 needs tuning */
#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */
+#define SDHCI_USE_PLATDMA (1<<12) /* Host uses 3rd party DMA */
unsigned int version; /* SDHCI spec. version */
@@ -142,6 +144,7 @@ struct sdhci_host {
struct mmc_request *mrq; /* Current request */
struct mmc_command *cmd; /* Current command */
+ int last_cmdop; /* Opcode of last cmd sent */
struct mmc_data *data; /* Current data request */
unsigned int data_early:1; /* Data finished before cmd */