openwrtv4/target/linux/ramips/dts/F7C027.dts
Mathias Kresin bcfbeae79f ramips: use rfkill for wps button on wlan only boards
All of the touched boards don't have an ethernet port. Allow to use the
wps button on these boards to enable the wireless radio after boot.

The force enabled wireless for the DCH-M225 is removed. It is reckless
to bring up an unencrypted wireless network by default these days.

Using the wps button to bring up the radio seam to me the better
approach.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-15 09:01:45 +02:00

131 lines
2 KiB
Text

/dts-v1/;
#include "rt5350.dtsi"
/ {
compatible = "F7C027", "ralink,rt5350-soc";
model = "Belkin F7C027";
gpio-leds {
compatible = "gpio-leds";
status {
label = "f7c027:blue:status";
gpios = <&gpio0 7 1>;
};
power {
label = "f7c027:blue:power";
gpios = <&gpio0 9 1>;
};
orange {
label = "f7c027:orange:status";
gpios = <&gpio0 11 1>;
};
relay {
label = "f7c027:device:relay";
gpios = <&gpio0 13 0>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
top {
label = "restore";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
power {
label = "power";
gpios = <&gpio0 12 1>;
linux,code = <0xf7>;
};
sensor {
label = "sensor";
gpios = <&gpio0 14 1>;
linux,code = <0x100>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l12805d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x770000>;
};
partition@7c0000 {
label = "firmware2";
reg = <0x7c0000 0x770000>;
};
partition@f30000 {
label = "belkin_settings";
reg = <0xf30000 0xa0000>;
};
partition@fd0000 {
label = "unknown";
reg = <0xfd0000 0x10000>;
};
partition@fe0000 {
label = "nvram";
reg = <0xfe0000 0x10000>;
};
partition@ff0000 {
label = "user_factory";
reg = <0xff0000 0x10000>;
};
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};