openwrtv4/target/linux/ramips/image
Vianney le Clément de Saint-Marcq bcf2125142 ramips: add support for Zorlik ZL5900V2
The Zorlik ZL5900V2 is an unbranded clone of HAME MPR-A1/2.  It is
marketed as "3G Wi-Fi Router".  Only the PCB has the model name
"ZL5900V2" printed on it.

Specifications:
- Ralink RT5350F (360 MHz)
- 32 MB RAM
- 8 MB Flash
- 802.11bgn 1T1R
- 1x 10/100 Mbps Ethernet
- 1x USB 2.0 (Type-A)
- 5200 mAh battery

The ramdisk image (not the squashfs sysupgrade image) can be flashed
through the web interface (named "GoAhead") of the factory firmware.
However, as the factory firmware does not cleanly unmount the rootfs
before flashing, the device may hang instead of rebooting after
successful write.  Power cycling the device gets you in OpenWrt where
the squashfs image may be flashed through normal sysupgrade procedure.

Signed-off-by: Vianney le Clément de Saint-Marcq <code@quartic.eu>
2018-04-08 09:53:50 +02:00
..
lzma-loader ramips: lzma-loader: fix O32 ABI conformance 2016-03-21 13:15:29 +00:00
Makefile ramips: add support for D-Link DWR-116-A1/2 2018-03-18 22:22:38 +01:00
mt76x8.mk ramips: image: drop redundant SUPPORTED_DEVICES 2018-04-06 23:11:00 +02:00
mt7620.mk ramips: add U-Boot env support for ALFA Network AC1200RM 2018-04-06 23:11:00 +02:00
mt7621.mk ramips: add support for the YouHua WR1200JS 2018-04-08 09:52:48 +02:00
rt288x.mk ramips: use generic board detection for D-Link DAP-1522 A1 2018-02-20 19:25:17 +01:00
rt305x-legacy.mk ramips: use new image build code for WHR-G300N 2018-02-13 10:01:53 +01:00
rt305x.mk ramips: add support for Zorlik ZL5900V2 2018-04-08 09:53:50 +02:00
rt3883.mk ramips: add support for Loewe WMDR-143N 2017-07-27 09:13:27 +02:00