openwrtv4/target/linux/brcm63xx/patches-4.4/001-4.13-02-mdio_bus-handle-only-single-PHY-reset-GPIO.patch
Kevin Darbyshire-Bryant b0d99b77e5 kernel: bump 4.4 to 4.4.107
Refresh patches.

Update patch that no longer applied:
oxnas/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tested-by: Rosen Penev <rosenp@gmail.com>
2017-12-23 15:36:01 +01:00

120 lines
3.6 KiB
Diff

From d396e84c56047b303cac378dde4b2e5cc430b336 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Mon, 12 Jun 2017 23:55:38 +0300
Subject: [PATCH] mdio_bus: handle only single PHY reset GPIO
Commit 4c5e7a2c0501 ("dt-bindings: mdio: Clarify binding document")
declared that a MDIO reset GPIO property should have only a single GPIO
reference/specifier, however the supporting code was left intact, still
burdening the kernel with now apparently useless loops -- get rid of them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/phy/mdio_bus.c | 53 +++++++++++++++++-----------------------------
drivers/of/of_mdio.c | 1 -
include/linux/phy.h | 6 ++----
3 files changed, 21 insertions(+), 39 deletions(-)
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -279,33 +279,22 @@ int __mdiobus_register(struct mii_bus *b
mutex_init(&bus->mdio_lock);
- /* de-assert bus level PHY GPIO resets */
- if (bus->num_reset_gpios > 0) {
- bus->reset_gpiod = devm_kcalloc(&bus->dev,
- bus->num_reset_gpios,
- sizeof(struct gpio_desc *),
- GFP_KERNEL);
- if (!bus->reset_gpiod)
- return -ENOMEM;
- }
-
- for (i = 0; i < bus->num_reset_gpios; i++) {
- gpiod = devm_gpiod_get_index(&bus->dev, "reset", i,
- GPIOD_OUT_LOW);
- if (IS_ERR(gpiod)) {
- err = PTR_ERR(gpiod);
- if (err != -ENOENT) {
- dev_err(&bus->dev,
- "mii_bus %s couldn't get reset GPIO\n",
- bus->id);
- return err;
- }
- } else {
- bus->reset_gpiod[i] = gpiod;
- gpiod_set_value_cansleep(gpiod, 1);
- udelay(bus->reset_delay_us);
- gpiod_set_value_cansleep(gpiod, 0);
+ /* de-assert bus level PHY GPIO reset */
+ gpiod = devm_gpiod_get(&bus->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod)) {
+ err = PTR_ERR(gpiod);
+ if (err != -ENOENT) {
+ dev_err(&bus->dev,
+ "mii_bus %s couldn't get reset GPIO\n",
+ bus->id);
+ return err;
}
+ } else {
+ bus->reset_gpiod = gpiod;
+
+ gpiod_set_value_cansleep(gpiod, 1);
+ udelay(bus->reset_delay_us);
+ gpiod_set_value_cansleep(gpiod, 0);
}
if (bus->reset)
@@ -337,10 +326,8 @@ error:
}
/* Put PHYs in RESET to save power */
- for (i = 0; i < bus->num_reset_gpios; i++) {
- if (bus->reset_gpiod[i])
- gpiod_set_value_cansleep(bus->reset_gpiod[i], 1);
- }
+ if (bus->reset_gpiod)
+ gpiod_set_value_cansleep(bus->reset_gpiod, 1);
device_del(&bus->dev);
return err;
@@ -363,10 +350,8 @@ void mdiobus_unregister(struct mii_bus *
}
/* Put PHYs in RESET to save power */
- for (i = 0; i < bus->num_reset_gpios; i++) {
- if (bus->reset_gpiod[i])
- gpiod_set_value_cansleep(bus->reset_gpiod[i], 1);
- }
+ if (bus->reset_gpiod)
+ gpiod_set_value_cansleep(bus->reset_gpiod, 1);
device_del(&bus->dev);
}
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -145,7 +145,6 @@ int of_mdiobus_register(struct mii_bus *
/* Get bus level PHY reset GPIO details */
mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;
of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);
- mdio->num_reset_gpios = of_gpio_named_count(np, "reset-gpios");
/* Register the MDIO bus */
rc = mdiobus_register(mdio);
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -190,10 +190,8 @@ struct mii_bus {
/* GPIO reset pulse width in microseconds */
int reset_delay_us;
- /* Number of reset GPIOs */
- int num_reset_gpios;
- /* Array of RESET GPIO descriptors */
- struct gpio_desc **reset_gpiod;
+ /* RESET GPIO descriptor pointer */
+ struct gpio_desc *reset_gpiod;
};
#define to_mii_bus(d) container_of(d, struct mii_bus, dev)