openwrtv4/target/linux/ar71xx/patches-4.4/610-MIPS-ath79-UBNT-add-airGateway-pro-support.patch
Felix Fietkau 2530640f07 ar71xx: add support for linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48563
2016-01-30 13:19:53 +00:00

62 lines
1.8 KiB
Diff

--- a/arch/mips/ath79/mach-ubnt-xm.c
+++ b/arch/mips/ath79/mach-ubnt-xm.c
@@ -642,3 +642,59 @@ static void __init ubnt_airgateway_setup
MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway",
ubnt_airgateway_setup);
+static struct gpio_led ubnt_airgateway_pro_gpio_leds[] __initdata = {
+ {
+ .name = "ubnt:blue:wlan",
+ .gpio = 13,
+ }, {
+ .name = "ubnt:white:status",
+ .gpio = 17,
+ },
+};
+
+
+static struct gpio_keys_button airgateway_pro_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 12,
+ .active_low = 1,
+ }
+};
+
+static void __init ubnt_airgateway_pro_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_pro_gpio_leds),
+ ubnt_airgateway_pro_gpio_leds);
+
+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(airgateway_pro_gpio_keys),
+ airgateway_pro_gpio_keys);
+
+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
+
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
+
+ ath79_register_mdio(1, 0x0);
+
+ /* GMAC0 is left unused in this configuration */
+
+ /* GMAC1 is connected to MAC0 on the internal switch */
+ /* The PoE/WAN port connects to port 5 on the internal switch */
+ /* The LAN port connects to port 4 on the internal switch */
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_register_eth(1);
+
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_AIRGWP, "UBNT-AGWP", "Ubiquiti AirGateway Pro",
+ ubnt_airgateway_pro_setup);