No description
Find a file
2011-07-05 23:10:47 +00:00
docs kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include allow targets to define a default subtarget when using automatic subtarget detection from r27407 2011-07-04 11:21:37 +00:00
package e2fsprogs: Added libpthread back to blkid link, otherwise blkid fails to link) 2011-07-05 23:10:47 +00:00
scripts allow targets to define a default subtarget when using automatic subtarget detection from r27407 2011-07-04 11:21:37 +00:00
target add some symbols 2011-07-05 21:19:57 +00:00
toolchain eglibc: remove old versions 2011-07-02 09:47:00 +00:00
tools tools/firmware-utils: add new firmware tool for the DIR-300-B1 board 2011-07-04 06:48:42 +00:00
.gitignore add vim temp files (*~) to .gitignore 2011-04-29 15:11:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add menuconfig option to enable log files during build process 2011-07-03 17:37:31 +00:00
feeds.conf.default switch to LuCI trunk, should be stable enough for common use now 2010-11-16 00:05:41 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk add menuconfig option to enable log files during build process 2011-07-03 17:37:31 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org