c198ca682c
YunCore SR3200 is a dual-band AC1200 router, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8337N. YunCore XD3200 (FCC ID: 2ADUG-XD3200) is a dual-band AC1200 ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8334. Common specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB or RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz, with ext. PA (SKY65174-21), up to 30 dBm - 2T2R 5 GHz, with ext. PA (SKY85405-11) and LNA (SKY85601-11), up to 30 dBm SR3200 specification: - 5x 10/100/1000 Mbps Ethernet - 6x ext. RP-SMA antennas (actually, only 4 are connected with radio chips) - 3x LED (+ 5x LED in RJ45 sockets), 1x button - UART header on PCB XD3200 specification: - 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port) - 4x internal antennas - 3 sets of LEDs on external PCB (+ 2x LED near RJ45 sockets), 1x button - UART and JTAG (custom 6-pin, 2 mm pitch) headers on PCB LED for 5 GHz WLAN is currently not supported on both devices as it is connected directly to the QCA9882 radio chip. Flash instruction under vendor firmware, using telnet/SSH: 1. If your firmware does not have root password, go to point 5 2. Connect PC with 192.168.1.x address to LAN or WAN port 3. Power up device, enter failsafe mode with button (no LED indicator!) 4. Change root password and reboot (mount_root, passwd ..., reboot -f) 5. Upload lede-ar71xx-...-sysupgrade.bin to /tmp using SCP 6. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253 7. Invoke: - cd /tmp - fw_setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000" - mtd -e firmware -r write lede-ar71xx-...-sysupgrade.bin firmware Flash instruction under U-Boot, using UART: 1. tftp 0x80060000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f050000 +$filesize 3. cp.b $fileaddr 0x9f050000 $filesize 4. setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000" 5. saveenv && reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
1824 lines
43 KiB
Text
1824 lines
43 KiB
Text
config ATH79_MACH_ALFA_AP120C
|
|
bool "ALFA Network AP120C board support"
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ALFA_AP96
|
|
bool "ALFA Network AP96 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_HORNET_UB
|
|
bool "ALFA Network Hornet-UB board support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ALFA_NX
|
|
bool "ALFA Network N2/N5 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TUBE2H
|
|
bool "ALFA Network Tube2H board support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ALL0258N
|
|
bool "Allnet ALL0258N support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_ALL0315N
|
|
bool "Allnet ALL0315N support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_ANTMINER_S1
|
|
bool "Bitmain Antminer S1 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ANTMINER_S3
|
|
bool "Bitmain Antminer S3 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ANTROUTER_R1
|
|
bool "Bitmain Antrouter R1 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARDUINO_YUN
|
|
bool "Arduino Yun"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
Arduino Yun.
|
|
|
|
config ATH79_MACH_AP113
|
|
bool "Atheros AP113 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_PB9X_PCI if PCI
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_ETH
|
|
|
|
config ATH79_MACH_AP132
|
|
bool "Atheros AP132 reference board"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
Atheros AP132 reference boards.
|
|
|
|
config ATH79_MACH_AP143
|
|
bool "Atheros AP143 reference board"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_M25P80
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
Atheros AP143 reference board.
|
|
|
|
config ATH79_MACH_AP147
|
|
bool "Atheros AP147 reference board"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
QCA AP147 reference boards.
|
|
|
|
config ATH79_MACH_AP152
|
|
bool "Atheros AP152 reference board"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
QCA AP152 reference boards.
|
|
|
|
|
|
config ATH79_MACH_AP83
|
|
bool "Atheros AP83 board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP90Q
|
|
bool "YunCore AP90Q support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP96
|
|
bool "Atheros AP96 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_PB42
|
|
bool "Atheros PB42 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_PB92
|
|
bool "Atheros PB92 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_PB9X_PCI if PCI
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_C55
|
|
bool "AirTight Networks C-55 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_C60
|
|
bool "AirTight Networks C-60 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_AW_NR580
|
|
bool "AzureWave AW-NR580 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_F9K1115V2
|
|
bool "Belkin AC1750DB board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EPG5000
|
|
bool "EnGenius EPG5000 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_ESR1750
|
|
bool "EnGenius ESR1750 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SOM9331
|
|
bool "SOM9331 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SR3200
|
|
bool "YunCore SR3200 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_BHR_4GRV2
|
|
bool "Buffalo BHR-4GRV2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WHR_HP_G300N
|
|
bool "Buffalo WHR-HP-G300N board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WLAE_AG300N
|
|
bool "Buffalo WLAE-AG300N board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WLR8100
|
|
bool "Sitecom WLR-8100 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WZR_HP_AG300H
|
|
bool "Buffalo WZR-HP-AG300H board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WZR_HP_G300NH
|
|
bool "Buffalo WZR-HP-G300NH board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select RTL8366_SMI
|
|
|
|
config ATH79_MACH_WZR_HP_G300NH2
|
|
bool "Buffalo WZR-HP-G300NH2 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WZR_HP_G450H
|
|
bool "Buffalo WZR-HP-G450H board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WZR_450HP2
|
|
bool "Buffalo WZR-450HP2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WP543
|
|
bool "Compex WP543/WPJ543 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select MYLOADER
|
|
|
|
config ATH79_MACH_WPE72
|
|
bool "Compex WPE72/WPE72NX board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select MYLOADER
|
|
|
|
config ATH79_MACH_WPJ342
|
|
bool "Compex WPJ342 board support"
|
|
select SOC_AS934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ344
|
|
bool "Compex WPJ344 board support"
|
|
select SOC_AS934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ531
|
|
bool "Compex WPJ531 board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ558
|
|
bool "Compex WPJ558 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_XD3200
|
|
bool "YunCore XD3200 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DGL_5500_A1
|
|
bool "D-Link DGL-5500 A1 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DHP_1565_A1
|
|
bool "D-Link DHP-1565 rev. A1 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DIR_505_A1
|
|
bool "D-Link DIR-505-A1 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DIR_600_A1
|
|
bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DIR_615_C1
|
|
bool "D-Link DIR-615 rev. C1 support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DIR_615_I1
|
|
bool "D-Link DIR-615 rev. I1 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DIR_825_B1
|
|
bool "D-Link DIR-825 rev. B1 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DIR_825_C1
|
|
bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DIR_869_A1
|
|
bool "D-Link DIR-869 rev. A1"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DLAN_HOTSPOT
|
|
bool "devolo dLAN Hotspot support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DLAN_PRO_500_WP
|
|
bool "devolo dLAN pro 500 Wireless+ support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DLAN_PRO_1200_AC
|
|
bool "devolo dLAN pro 1200+ WiFi ac support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DOMYWIFI_DW33D
|
|
bool "DomyWifi DW33D support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DR344
|
|
bool "Wallys DR344 board support"
|
|
select SOC_AS934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DR531
|
|
bool "Wallys DR531 board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DRAGINO2
|
|
bool "DRAGINO V2 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_ESR900
|
|
bool "EnGenius ESR900 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EW_DORIN
|
|
bool "embedded wireless Dorin Platform support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
Dorin Platform from www.80211.de .
|
|
|
|
config ATH79_MACH_EL_M150
|
|
bool "EasyLink EL-M150 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EL_MINI
|
|
bool "EasyLink EL-MINI support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR150
|
|
bool "GL AR150 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR300
|
|
bool "GL_AR300 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR300M
|
|
bool "GL_AR300M support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_DOMINO
|
|
bool "DOMINO support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_MIFI
|
|
bool "GL MIFI support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_INET
|
|
bool "GL-INET support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EAP120
|
|
bool "TP-LINK EAP120 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EAP300V2
|
|
bool "EnGenius EAP300 v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GS_MINIBOX_V1
|
|
bool "Gainstrong MiniBox V1.0 support"
|
|
select SOC_AR933X
|
|
select ARH79_DEV_ETH
|
|
select ARH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GS_OOLITE
|
|
bool "GS Oolite V1 support"
|
|
select SOC_AR933X
|
|
select ARH79_DEV_ETH
|
|
select ARH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_HIWIFI_HC6361
|
|
bool "HiWiFi HC6361 board support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_JA76PF
|
|
bool "jjPlus JA76PF board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_JWAP003
|
|
bool "jjPlus JWAP003 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_JWAP230
|
|
bool "jjPlus JWAP230 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WRT160NL
|
|
bool "Linksys WRT160NL board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_WRT400N
|
|
bool "Linksys WRT400N board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WRTNODE2Q
|
|
bool "WRTnode2Q board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_R6100
|
|
bool "NETGEAR R6100 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MC_MAC1200R
|
|
bool "MERCURY MAC1200R board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RB4XX
|
|
bool "MikroTik RouterBOARD 4xx series support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_RB750
|
|
bool "MikroTik RouterBOARD 750 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RB91X
|
|
bool "MikroTik RouterBOARD 91X support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RB922
|
|
bool "MikroTik RouterBOARD 922 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
select RLE_DECOMPRESS
|
|
|
|
config ATH79_MACH_RB95X
|
|
bool "MikroTik RouterBOARD 95X support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RB2011
|
|
bool "MikroTik RouterBOARD 2011 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RBSXTLITE
|
|
bool "MikroTik RouterBOARD SXT Lite"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_SMART_300
|
|
bool "NC-LINK SMART-300 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TELLSTICK_ZNET_LITE
|
|
bool "TellStick ZNet Lite"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WNDAP360
|
|
bool "NETGEAR WNDAP360 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WNDR3700
|
|
bool "NETGEAR WNDR3700 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WNDR4300
|
|
bool "NETGEAR WNDR3700v4/WNDR4300 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WNR2000
|
|
bool "NETGEAR WNR2000 board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WNR2000_V3
|
|
bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2/WPN824N board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WNR2200
|
|
bool "NETGEAR WNR2200 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WNR2000_V4
|
|
bool "NETGEAR WNR2000 V4"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM2P
|
|
bool "OpenMesh OM2P board support"
|
|
select SOC_AR724X
|
|
select SOC_AR933X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM5P
|
|
bool "OpenMesh OM5P board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM5P_AC
|
|
bool "OpenMesh OM5P-AC board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM5P_ACv2
|
|
bool "OpenMesh OM5P-ACv2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OMY_G1
|
|
bool "OMYlink OMY G1 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OMY_X1
|
|
bool "OMYlink OMY X1 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ONION_OMEGA
|
|
bool "ONION OMEGA support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR12
|
|
bool "Meraki MR12 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR16
|
|
bool "Meraki MR16 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR18
|
|
bool "Meraki MR18 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select LEDS_NU801
|
|
|
|
config ATH79_MACH_MR600
|
|
bool "OpenMesh MR600 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MZK_W04NU
|
|
bool "Planex MZK-W04NU board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MZK_W300NH
|
|
bool "Planex MZK-W300NH board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RW2458N
|
|
bool "Redwave RW2458N board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_CAP324
|
|
bool "PowerCloud CAP324 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CAP4200AG
|
|
bool "Senao CAP4200AG support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CR3000
|
|
bool "PowerCloud CR3000 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CR5000
|
|
bool "PowerCloud CR5000 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR1750
|
|
bool "OpenMesh MR1750 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR900
|
|
bool "OpenMesh MR900 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EAP7660D
|
|
bool "Senao EAP7660D support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_BSB
|
|
bool "Smart Electronics Black Swift board"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C7
|
|
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CPE510
|
|
bool "TP-LINK CPE510 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CPE830
|
|
bool "YunCore CPE830 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CPE870
|
|
bool "YunCore CPE870 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR11U
|
|
bool "TP-LINK TL-MR11U/TL-MR3040 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR13U
|
|
bool "TP-LINK TL-MR13U support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR3020
|
|
bool "TP-LINK TL-MR3020 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR3X20
|
|
bool "TP-LINK TL-MR3220/3420 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_TL_WAX50RE
|
|
bool "TP-LINK TL-WA750/850RE support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA701ND_V2
|
|
bool "TP-LINK TL-WA701ND v2 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA7210N_V2
|
|
bool "TP-LINK TL-WA7210N v2 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
config ATH79_MACH_TL_WA801ND_V3
|
|
bool "TP-LINK TL-WA801ND v3 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
config ATH79_MACH_TL_WA830RE_V2
|
|
bool "TP-LINK TL-WA830RE v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA901ND
|
|
bool "TP-LINK TL-WA901ND/TL-WA7510N support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WA901ND_V2
|
|
bool "TP-LINK TL-WA901ND v2 support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA901ND_V4
|
|
bool "TP-LINK TL-WA901ND v4 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR3320_V2
|
|
bool "TP-LINK TL-WDR3320 v2 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR3500
|
|
bool "TP-LINK TL-WDR3500 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR4300
|
|
bool "TP-LINK TL-WDR3600/4300/4310 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR6500_V2
|
|
bool "TP-LINK TL-WDR6500 v2 board support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR703N
|
|
bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR720N_V3
|
|
bool "TP-LINK TL-WR720N v3/v4 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR741ND
|
|
bool "TP-LINK TL-WR741ND support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR741ND_V4
|
|
bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR802N_V1
|
|
bool "TP-LINK TL-WR802N v1 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR810N
|
|
bool "TP-LINK TL-WR810N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR841N_V1
|
|
bool "TP-LINK TL-WR841N v1 support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_DSA
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR841N_V8
|
|
bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR841N_V9
|
|
bool "TP-LINK TL-WR841N/ND v9/TL-WR842N/ND v3 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR941ND
|
|
bool "TP-LINK TL-WR941ND support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_DSA
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR941ND_V6
|
|
bool "TP-LINK TL-WR941ND v6 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1041N_V2
|
|
bool "TP-LINK TL-WR1041N v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1043ND
|
|
bool "TP-LINK TL-WR1043ND support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1043ND_V2
|
|
bool "TP-LINK TL-WR1043ND v2 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR2543N
|
|
bool "TP-LINK TL-WR2543N/ND support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_TEW_632BRP
|
|
bool "TRENDnet TEW-632BRP support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_TEW_673GRU
|
|
bool "TRENDnet TEW-673GRU support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_TEW_712BR
|
|
bool "TRENDnet TEW-712BR support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_TEW_732BR
|
|
bool "TRENDnet TEW-732BR support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TEW_823DRU
|
|
bool "TRENDnet TEW-823DRU support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_UBNT
|
|
bool "Ubiquiti AR71xx based boards support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_UBNT_UNIFIAC
|
|
bool "Ubiquiti UniFi AC (LITE/LR/PRO) support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WEIO
|
|
bool "WeIO board"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MYNET_N600
|
|
bool "WD My Net N600 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_MYNET_N750
|
|
bool "WD My Net N750 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_MYNET_REXT
|
|
bool "WD My Net Wi-Fi Range Extender board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_Z1
|
|
bool "Meraki Z1 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select LEDS_NU801
|
|
|
|
config ATH79_MACH_ZBT_WE1526
|
|
bool "Zbtlink ZBT-WE1526 board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ZCN_1523H
|
|
bool "Zcomax ZCN-1523H support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_NBG460N
|
|
bool "Zyxel NBG460N/550N/550NH board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_NBG6716
|
|
bool "Zyxel NBG6616/NBG6716 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CARAMBOLA2
|
|
bool "8devices Carambola2 board"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E316N_V2
|
|
bool "COMFAST CF-E316N v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E320N_V2
|
|
bool "COMFAST CF-E320N v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E380AC_V1
|
|
bool "COMFAST CF-E380AC v1 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E380AC_V2
|
|
bool "COMFAST CF-E380AC v2 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E520N
|
|
bool "COMFAST CF-E520N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E530N
|
|
bool "COMFAST CF-E530N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_BHU_BXU2000N2_A
|
|
bool "BHU BXU2000n-2 rev. A support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_QIHOO_C301
|
|
bool "Qihoo 360 C301 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DAP_2695_A1
|
|
bool "D-Link DAP-2695 rev. A1 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WPA8630
|
|
bool "TP-Link TL-WPA8630 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|