openwrtv4/target/linux/ramips/dts/F7C027.dts
John Crispin 1a392636a5 ramips: use consistent naming scheme for LEDs
The upstream LED naming convention is "device:color:led-name", but it seems that many of supported boards in OpenWrt don't follow this approach.
The following patch fixes this inconsistency in dts{,i} files and updates base-files scripts for ramips target:
 * fixes wrong indentation
 * keeps case statements structure in same convention as in other scripts (no empty line after ";;", no indentation for case...esac body)
 * fixes wrong LED names for some of boards (makes them the same as in dts{,i} files)
 * combines boards with same configuration (ex. set_wifi_led "rt2800pci-phy0::radio" in 01_leds)

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46664
2015-08-17 06:24:34 +00:00

133 lines
2.1 KiB
Text

/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "F7C027", "ralink,rt5350-soc";
model = "Belkin F7C027";
palmbus@10000000 {
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l12805d";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l12805d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x770000>;
};
partition@7c0000 {
label = "firmware2";
reg = <0x7c0000 0x770000>;
};
partition@f30000 {
label = "belkin_settings";
reg = <0xf30000 0xa0000>;
};
partition@fd0000 {
label = "unknown";
reg = <0xfd0000 0x10000>;
};
partition@fe0000 {
label = "nvram";
reg = <0xfe0000 0x10000>;
};
partition@ff0000 {
label = "user_factory";
reg = <0xff0000 0x10000>;
};
};
};
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "f7c027:blue:status";
gpios = <&gpio0 7 1>;
};
power {
label = "f7c027:blue:power";
gpios = <&gpio0 9 1>;
};
orange {
label = "f7c027:orange:status";
gpios = <&gpio0 11 1>;
};
relay {
label = "f7c027:device:relay";
gpios = <&gpio0 13 0>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
top {
label = "top";
gpios = <&gpio0 10 1>;
linux,code = <0x198>;
};
power {
label = "power";
gpios = <&gpio0 12 1>;
linux,code = <0x100>;
};
sensor {
label = "sensor";
gpios = <&gpio0 14 1>;
linux,code = <0x101>;
};
};
};