openwrtv4/target/linux/brcm63xx/patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
Jonas Gorski 387fd3ca26 brcm63xx: add kernel 3.18 support
Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461
2014-12-01 13:27:26 +00:00

206 lines
6 KiB
Diff

From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jogo@openwrt.org>
Date: Mon, 7 Jan 2013 17:45:39 +0100
Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
---
arch/mips/bcm63xx/Makefile | 2 +-
arch/mips/bcm63xx/boards/board_bcm963xx.c | 17 ++++-
arch/mips/bcm63xx/dev-flash.c | 2 +-
arch/mips/bcm63xx/pci-rt2x00-fixup.c | 71 ++++++++++++++++++++
.../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 +-
.../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 9 ++-
.../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h | 9 +++
7 files changed, 104 insertions(+), 8 deletions(-)
create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -2,7 +2,7 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o
setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
- pci-ath9k-fixup.o usb-common.o sprom.o
+ pci-ath9k-fixup.o pci-rt2x00-fixup.o usb-common.o sprom.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-y += boards/
--- a/arch/mips/bcm63xx/boards/board_common.c
+++ b/arch/mips/bcm63xx/boards/board_common.c
@@ -37,6 +37,7 @@
#include <bcm63xx_dev_usb_usbd.h>
#include <board_bcm963xx.h>
#include <pci_ath9k_fixup.h>
+#include <pci_rt2x00_fixup.h>
#include "board_common.h"
@@ -296,9 +297,19 @@ int __init board_register_devices(void)
}
/* register any fixups */
- for (i = 0; i < board.has_caldata; i++)
- pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
- board.caldata[i].endian_check, board.caldata[i].led_pin);
+ for (i = 0; i < board.has_caldata; i++) {
+ switch (board.caldata[i].vendor) {
+ case PCI_VENDOR_ID_ATHEROS:
+ pci_enable_ath9k_fixup(board.caldata[i].slot,
+ board.caldata[i].caldata_offset, board.caldata[i].endian_check,
+ board.caldata[i].led_pin);
+ break;
+ case PCI_VENDOR_ID_RALINK:
+ pci_enable_rt2x00_fixup(board.caldata[i].slot,
+ board.caldata[i].eeprom);
+ break;
+ }
+ }
return 0;
}
--- a/arch/mips/bcm63xx/dev-flash.c
+++ b/arch/mips/bcm63xx/dev-flash.c
@@ -201,7 +201,7 @@ void __init bcm63xx_flash_detect(void)
}
}
-int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata)
{
u32 val;
unsigned int i;
--- /dev/null
+++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
@@ -0,0 +1,72 @@
+/*
+ * Broadcom BCM63XX RT2x00 EEPROM fixup helper.
+ *
+ * Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * Based on
+ *
+ * Broadcom BCM63XX Ath9k EEPROM fixup helper.
+ *
+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/if_ether.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/rt2x00_platform.h>
+
+#include <bcm63xx_nvram.h>
+#include <pci_rt2x00_fixup.h>
+
+struct rt2x00_fixup {
+ unsigned slot;
+ u8 mac[ETH_ALEN];
+ struct rt2x00_platform_data pdata;
+};
+
+static int rt2x00_num_fixups;
+static struct rt2x00_fixup rt2x00_fixups[2] = {
+ {
+ .slot = 255,
+ },
+ {
+ .slot = 255,
+ },
+};
+
+static void rt2x00_pci_fixup(struct pci_dev *dev)
+{
+ unsigned i;
+ struct rt2x00_platform_data *pdata = NULL;
+
+ for (i = 0; i < rt2x00_num_fixups; i++) {
+ if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
+ continue;
+
+ pdata = &rt2x00_fixups[i].pdata;
+ break;
+ }
+
+ dev->dev.platform_data = pdata;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
+
+void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
+{
+ if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
+ return;
+
+ rt2x00_fixups[rt2x00_num_fixups].slot = slot;
+ rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
+
+ if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
+ return;
+
+ rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
+ rt2x00_num_fixups++;
+}
+
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
@@ -13,7 +13,7 @@ void bcm63xx_flash_detect(void);
void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
-int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata);
int bcm63xx_flash_get_type(void);
--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
@@ -10,6 +10,7 @@
#include <bcm63xx_dev_dsp.h>
#include <bcm63xx_fallback_sprom.h>
#include <pci_ath9k_fixup.h>
+#include <pci_rt2x00_fixup.h>
/*
* flash mapping
@@ -17,11 +18,15 @@
#define BCM963XX_CFE_VERSION_OFFSET 0x570
#define BCM963XX_NVRAM_OFFSET 0x580
-struct ath9k_caldata {
+struct bcm63xx_caldata {
+ unsigned int vendor;
unsigned int slot;
u32 caldata_offset;
+ /* Atheros */
unsigned int endian_check:1;
int led_pin;
+ /* Ralink */
+ char* eeprom;
};
/*
@@ -47,7 +52,7 @@ struct board_info {
unsigned int has_caldata:2;
/* wifi calibration data config */
- struct ath9k_caldata caldata[2];
+ struct bcm63xx_caldata caldata[2];
/* ethernet config */
struct bcm63xx_enet_platform_data enet0;
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
@@ -0,0 +1,9 @@
+#ifndef _PCI_RT2X00_FIXUP
+#define _PCI_RT2X00_FIXUP
+
+#define PCI_VENDOR_ID_RALINK 0x1814
+
+void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
+
+#endif /* _PCI_RT2X00_FIXUP */
+