openwrtv4/target/linux/brcm63xx/patches-3.14/520-bcm63xx-add-support-for-96368MVWG-board.patch
Jonas Gorski bb312899f6 brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43453
2014-12-01 00:51:24 +00:00

145 lines
3.2 KiB
Diff

From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
From: Maxime Bizon <mbizon@freebox.fr>
Date: Wed, 20 Jan 2010 16:21:30 +0100
Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
---
arch/mips/bcm63xx/boards/board_bcm963xx.c | 95 ++++++++++++++++++++
.../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 2 +
2 files changed, 97 insertions(+), 0 deletions(-)
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1920,6 +1920,85 @@ static struct board_info __initdata boar
#endif /* CONFIG_BCM63XX_CPU_6358 */
/*
+ * known 6368 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_6368
+static struct board_info __initdata board_96368mvwg = {
+ .name = "96368MVWG",
+ .expected_cpu_id = 0x6368,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+
+ .has_usbd = 1,
+
+ .usbd = {
+ .use_fullspeed = 0,
+ .port_no = 0,
+ },
+
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "port1",
+ },
+
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "port2",
+ },
+
+ [4] = {
+ .used = 1,
+ .phy_id = 0x12,
+ .name = "port0",
+ },
+
+ [5] = {
+ .used = 1,
+ .phy_id = 0x11,
+ .name = "port3",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "96368MVWG:green:adsl",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "96368MVWG:green:ppp",
+ .gpio = 5,
+ },
+ {
+ .name = "96368MVWG:green:power",
+ .gpio = 22,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "96368MVWG:green:wps",
+ .gpio = 23,
+ .active_low = 1,
+ },
+ {
+ .name = "96368MVWG:red:ppp-fail",
+ .gpio = 31,
+ },
+ },
+
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+};
+#endif /* CONFIG_BCM63XX_CPU_6368 */
+
+/*
* all boards
*/
static const struct board_info __initconst *bcm963xx_boards[] = {
@@ -1971,6 +2050,10 @@ static const struct board_info __initcon
&board_HW553,
&board_spw303v,
#endif
+
+#ifdef CONFIG_BCM63XX_CPU_6368
+ &board_96368mvwg,
+#endif
};
static struct of_device_id const bcm963xx_boards_dt[] = {
@@ -2019,6 +2102,7 @@ static struct of_device_id const bcm963x
{ .compatible = "t-com,spw303v", .data = &board_spw303v, },
#endif
#ifdef CONFIG_BCM63XX_CPU_6368
+ { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
#endif
#ifdef CONFIG_BCM63XX_CPU_63268
{ .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, },
--- a/arch/mips/bcm63xx/boards/board_common.c
+++ b/arch/mips/bcm63xx/boards/board_common.c
@@ -88,12 +88,25 @@ void __init board_early_setup(const stru
bcm63xx_pci_enabled = 1;
if (BCMCPU_IS_6348())
val |= GPIO_MODE_6348_G2_PCI;
+
+ if (BCMCPU_IS_6368())
+ val |= GPIO_MODE_6368_PCI_REQ1 |
+ GPIO_MODE_6368_PCI_GNT1 |
+ GPIO_MODE_6368_PCI_INTB |
+ GPIO_MODE_6368_PCI_REQ0 |
+ GPIO_MODE_6368_PCI_GNT0;
}
#endif
if (board.has_pccard) {
if (BCMCPU_IS_6348())
val |= GPIO_MODE_6348_G1_MII_PCCARD;
+
+ if (BCMCPU_IS_6368())
+ val |= GPIO_MODE_6368_PCMCIA_CD1 |
+ GPIO_MODE_6368_PCMCIA_CD2 |
+ GPIO_MODE_6368_PCMCIA_VS1 |
+ GPIO_MODE_6368_PCMCIA_VS2;
}
if (board.has_enet0 && !board.enet0.use_internal_phy) {