baad22eed3
As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.9.y - Remove led1 from diag.sh for RPi3 since it causes boot issues. - Fix modules.mk typos. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
117 lines
3.5 KiB
Diff
117 lines
3.5 KiB
Diff
From ce8663f1f101f8c7b9037c31269b0b31373737ad Mon Sep 17 00:00:00 2001
|
|
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
|
Date: Tue, 27 Sep 2016 01:00:08 +0200
|
|
Subject: [PATCH] i2c: bcm2835: Add support for dynamic clock
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
Support a dynamic clock by reading the frequency and setting the
|
|
divisor in the transfer function instead of during probe.
|
|
|
|
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
|
|
Reviewed-by: Martin Sperl <kernel@martin.sperl.org>
|
|
---
|
|
drivers/i2c/busses/i2c-bcm2835.c | 51 +++++++++++++++++++++++++---------------
|
|
1 file changed, 32 insertions(+), 19 deletions(-)
|
|
|
|
--- a/drivers/i2c/busses/i2c-bcm2835.c
|
|
+++ b/drivers/i2c/busses/i2c-bcm2835.c
|
|
@@ -58,6 +58,7 @@ struct bcm2835_i2c_dev {
|
|
void __iomem *regs;
|
|
struct clk *clk;
|
|
int irq;
|
|
+ u32 bus_clk_rate;
|
|
struct i2c_adapter adapter;
|
|
struct completion completion;
|
|
struct i2c_msg *curr_msg;
|
|
@@ -78,6 +79,30 @@ static inline u32 bcm2835_i2c_readl(stru
|
|
return readl(i2c_dev->regs + reg);
|
|
}
|
|
|
|
+static int bcm2835_i2c_set_divider(struct bcm2835_i2c_dev *i2c_dev)
|
|
+{
|
|
+ u32 divider;
|
|
+
|
|
+ divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk),
|
|
+ i2c_dev->bus_clk_rate);
|
|
+ /*
|
|
+ * Per the datasheet, the register is always interpreted as an even
|
|
+ * number, by rounding down. In other words, the LSB is ignored. So,
|
|
+ * if the LSB is set, increment the divider to avoid any issue.
|
|
+ */
|
|
+ if (divider & 1)
|
|
+ divider++;
|
|
+ if ((divider < BCM2835_I2C_CDIV_MIN) ||
|
|
+ (divider > BCM2835_I2C_CDIV_MAX)) {
|
|
+ dev_err_ratelimited(i2c_dev->dev, "Invalid clock-frequency\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider);
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev)
|
|
{
|
|
u32 val;
|
|
@@ -224,7 +249,7 @@ static int bcm2835_i2c_xfer(struct i2c_a
|
|
{
|
|
struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
|
|
unsigned long time_left;
|
|
- int i;
|
|
+ int i, ret;
|
|
|
|
for (i = 0; i < (num - 1); i++)
|
|
if (msgs[i].flags & I2C_M_RD) {
|
|
@@ -233,6 +258,10 @@ static int bcm2835_i2c_xfer(struct i2c_a
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
+ ret = bcm2835_i2c_set_divider(i2c_dev);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
i2c_dev->curr_msg = msgs;
|
|
i2c_dev->num_msgs = num;
|
|
reinit_completion(&i2c_dev->completion);
|
|
@@ -282,7 +311,6 @@ static int bcm2835_i2c_probe(struct plat
|
|
{
|
|
struct bcm2835_i2c_dev *i2c_dev;
|
|
struct resource *mem, *irq;
|
|
- u32 bus_clk_rate, divider;
|
|
int ret;
|
|
struct i2c_adapter *adap;
|
|
|
|
@@ -306,28 +334,13 @@ static int bcm2835_i2c_probe(struct plat
|
|
}
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
|
|
- &bus_clk_rate);
|
|
+ &i2c_dev->bus_clk_rate);
|
|
if (ret < 0) {
|
|
dev_warn(&pdev->dev,
|
|
"Could not read clock-frequency property\n");
|
|
- bus_clk_rate = 100000;
|
|
+ i2c_dev->bus_clk_rate = 100000;
|
|
}
|
|
|
|
- divider = DIV_ROUND_UP(clk_get_rate(i2c_dev->clk), bus_clk_rate);
|
|
- /*
|
|
- * Per the datasheet, the register is always interpreted as an even
|
|
- * number, by rounding down. In other words, the LSB is ignored. So,
|
|
- * if the LSB is set, increment the divider to avoid any issue.
|
|
- */
|
|
- if (divider & 1)
|
|
- divider++;
|
|
- if ((divider < BCM2835_I2C_CDIV_MIN) ||
|
|
- (divider > BCM2835_I2C_CDIV_MAX)) {
|
|
- dev_err(&pdev->dev, "Invalid clock-frequency\n");
|
|
- return -ENODEV;
|
|
- }
|
|
- bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_DIV, divider);
|
|
-
|
|
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (!irq) {
|
|
dev_err(&pdev->dev, "No IRQ resource\n");
|