openwrtv4/target/linux/generic/hack-4.9/773-bgmac-add-srab-switch.patch
Kevin Darbyshire-Bryant 7dca1bae82 kernel: bump to 4.9.105
Refresh patches.

Drop patches that have been upstreamed:
target/linux/ar71xx/patches-4.9/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch
target/linux/generic/backport-4.9/095-v4.12-ipv6-Need-to-export-ipv6_push_frag_opts-for-tunnelin.patch
target/linux/generic/pending-4.9/180-net-phy-at803x-add-support-for-AT8032.patch
target/linux/generic/pending-4.9/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch
target/linux/generic/pending-4.9/182-net-qmi_wwan-add-BroadMobi-BM806U-2020-2033.patch

Compile & run tested: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-06-01 08:25:14 +02:00

98 lines
3.1 KiB
Diff

From 3cb240533ab787899dc7f17aa7d6c5b4810e2e58 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Fri, 7 Jul 2017 17:26:01 +0200
Subject: bcm53xx: bgmac: use srab switch driver
use the srab switch driver on these SoCs.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
drivers/net/ethernet/broadcom/bgmac-bcma.c | 1 +
drivers/net/ethernet/broadcom/bgmac.c | 24 ++++++++++++++++++++++++
drivers/net/ethernet/broadcom/bgmac.h | 4 ++++
3 files changed, 29 insertions(+)
--- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
@@ -243,6 +243,7 @@ static int bgmac_probe(struct bcma_devic
bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
+ bgmac->feature_flags |= BGMAC_FEAT_SRAB;
break;
case BCMA_CHIP_ID_BCM53573:
bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -11,6 +11,7 @@
#include <linux/bcma/bcma.h>
#include <linux/etherdevice.h>
+#include <linux/platform_data/b53.h>
#include <linux/bcm47xx_nvram.h>
#include "bgmac.h"
@@ -1388,6 +1389,17 @@ static const struct ethtool_ops bgmac_et
.set_link_ksettings = phy_ethtool_set_link_ksettings,
};
+static struct b53_platform_data bgmac_b53_pdata = {
+};
+
+static struct platform_device bgmac_b53_dev = {
+ .name = "b53-srab-switch",
+ .id = -1,
+ .dev = {
+ .platform_data = &bgmac_b53_pdata,
+ },
+};
+
/**************************************************
* MII
**************************************************/
@@ -1534,6 +1546,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
net_dev->hw_features = net_dev->features;
net_dev->vlan_features = net_dev->features;
+ if ((bgmac->feature_flags & BGMAC_FEAT_SRAB) && !bgmac_b53_pdata.regs) {
+ bgmac_b53_pdata.regs = ioremap_nocache(0x18007000, 0x1000);
+
+ err = platform_device_register(&bgmac_b53_dev);
+ if (!err)
+ bgmac->b53_device = &bgmac_b53_dev;
+ }
+
err = register_netdev(bgmac->net_dev);
if (err) {
dev_err(bgmac->dev, "Cannot register net device\n");
@@ -1556,6 +1576,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
void bgmac_enet_remove(struct bgmac *bgmac)
{
+ if (bgmac->b53_device)
+ platform_device_unregister(&bgmac_b53_dev);
+ bgmac->b53_device = NULL;
+
unregister_netdev(bgmac->net_dev);
phy_disconnect(bgmac->net_dev->phydev);
netif_napi_del(&bgmac->napi);
--- a/drivers/net/ethernet/broadcom/bgmac.h
+++ b/drivers/net/ethernet/broadcom/bgmac.h
@@ -409,6 +409,7 @@
#define BGMAC_FEAT_CC4_IF_SW_TYPE BIT(17)
#define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII BIT(18)
#define BGMAC_FEAT_CC7_IF_TYPE_RGMII BIT(19)
+#define BGMAC_FEAT_SRAB BIT(20)
struct bgmac_slot_info {
union {
@@ -513,6 +514,9 @@ struct bgmac {
u32 (*get_bus_clock)(struct bgmac *bgmac);
void (*cmn_maskset32)(struct bgmac *bgmac, u16 offset, u32 mask,
u32 set);
+
+ /* platform device for associated switch */
+ struct platform_device *b53_device;
};
struct bgmac *bgmac_alloc(struct device *dev);