openwrtv4/target/linux/bcm53xx/patches-4.4/112-bcm53xx-sprom-add-sprom-driver.patch
Rafał Miłecki dab0569b97 bcm53xx: use SPROM driver queued for 4.6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48935
2016-03-06 18:08:03 +00:00

45 lines
1.9 KiB
Diff

From 4e0ab3269a6d260a41a3673157753147f5f71341 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sun, 4 May 2014 13:19:20 +0200
Subject: [PATCH 03/17] bcm47xx-sprom: add Broadcom sprom parser driver
This driver needs an nvram driver and fetches the sprom values from the
nvram and provides it to any other driver. The calibration data for the
wifi chip the mac address and some more board description data is
stores in the sprom.
This is based on a copy of arch/mips/bcm47xx/sprom.c and my plan is to
make the bcm47xx MIPS SoCs also use this driver some time later.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
.../devicetree/bindings/misc/bcm47xx-sprom.txt | 16 +
drivers/misc/Kconfig | 11 +
drivers/misc/Makefile | 1 +
drivers/misc/bcm47xx-sprom.c | 690 +++++++++++++++++++++
4 files changed, 718 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
create mode 100644 drivers/misc/bcm47xx-sprom.c
--- a/drivers/firmware/broadcom/Kconfig
+++ b/drivers/firmware/broadcom/Kconfig
@@ -9,3 +9,14 @@ config BCM47XX_NVRAM
This driver provides an easy way to get value of requested parameter.
It simply reads content of NVRAM and parses it. It doesn't control any
hardware part itself.
+
+config BCM47XX_SPROM
+ bool "Broadcom SPROM driver"
+ depends on BCM47XX_NVRAM
+ help
+ Broadcom devices store configuration data in SPROM. Accessing it is
+ specific to the bus host type, e.g. PCI(e) devices have it mapped in
+ a PCI BAR.
+ In case of SoC devices SPROM content is stored on a flash used by
+ bootloader firmware CFE. This driver provides method to ssb and bcma
+ drivers to read SPROM on SoC.
--- a/drivers/firmware/broadcom/Makefile
+++ b/drivers/firmware/broadcom/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o
+obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o