KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/package/boot/uboot-layerscape/patches/0015-armv8-ls1012a-Add-support-of-ls1012ardb-board.patch
Yutang Jiang 15a14cf166 layerscape: add 64b/32b target for ls1012ardb device 
The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00

634 lines
17 KiB
Diff
Raw Blame History

From 4bb641f4d28053bd1ff4af73dc0a63be2151f851 Mon Sep 17 00:00:00 2001
From: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Date: Mon, 25 Apr 2016 14:37:33 +0530
Subject: [PATCH 15/93] armv8: ls1012a: Add support of ls1012ardb board
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.
Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
---
arch/arm/Kconfig | 10 ++
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/fsl-ls1012a-rdb.dts | 16 +++
arch/arm/dts/fsl-ls1012a-rdb.dtsi | 39 ++++++
board/freescale/ls1012ardb/Kconfig | 15 +++
board/freescale/ls1012ardb/MAINTAINERS | 6 +
board/freescale/ls1012ardb/Makefile | 7 +
board/freescale/ls1012ardb/README | 89 +++++++++++++
board/freescale/ls1012ardb/ls1012ardb.c | 220 +++++++++++++++++++++++++++++++
configs/ls1012ardb_qspi_defconfig | 10 ++
include/configs/ls1012a_common.h | 3 +-
include/configs/ls1012ardb.h | 61 +++++++++
include/linux/usb/xhci-fsl.h | 2 +-
13 files changed, 477 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/dts/fsl-ls1012a-rdb.dts
create mode 100644 arch/arm/dts/fsl-ls1012a-rdb.dtsi
create mode 100644 board/freescale/ls1012ardb/Kconfig
create mode 100644 board/freescale/ls1012ardb/MAINTAINERS
create mode 100644 board/freescale/ls1012ardb/Makefile
create mode 100644 board/freescale/ls1012ardb/README
create mode 100644 board/freescale/ls1012ardb/ls1012ardb.c
create mode 100644 configs/ls1012ardb_qspi_defconfig
create mode 100644 include/configs/ls1012ardb.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f5033db..5c20801 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -656,6 +656,15 @@ config TARGET_LS1012AQDS
development platform that supports the QorIQ LS1012A
Layerscape Architecture processor.
+config TARGET_LS1012ARDB
+ bool "Support ls1012ardb"
+ select ARM64
+ help
+ Support for Freescale LS1012ARDB platform.
+ The LS1012A Reference design board (RDB) is a high-performance
+ development platform that supports the QorIQ LS1012A
+ Layerscape Architecture processor.
+
config TARGET_LS1021AQDS
bool "Support ls1021aqds"
select CPU_V7
@@ -802,6 +811,7 @@ source "board/freescale/ls1043aqds/Kconfig"
source "board/freescale/ls1021atwr/Kconfig"
source "board/freescale/ls1043ardb/Kconfig"
source "board/freescale/ls1012aqds/Kconfig"
+source "board/freescale/ls1012ardb/Kconfig"
source "board/freescale/mx23evk/Kconfig"
source "board/freescale/mx25pdk/Kconfig"
source "board/freescale/mx28evk/Kconfig"
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ed5eb38..9e8137b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -95,7 +95,8 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
fsl-ls1043a-qds-lpuart.dtb \
fsl-ls1043a-rdb.dtb \
- fsl-ls1012a-qds.dtb
+ fsl-ls1012a-qds.dtb \
+ fsl-ls1012a-rdb.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
diff --git a/arch/arm/dts/fsl-ls1012a-rdb.dts b/arch/arm/dts/fsl-ls1012a-rdb.dts
new file mode 100644
index 0000000..4ec9786
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1012a-rdb.dts
@@ -0,0 +1,16 @@
+/*
+ * Device Tree file for Freescale Layerscape-1012A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "fsl-ls1012a-rdb.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &duart0;
+ };
+};
diff --git a/arch/arm/dts/fsl-ls1012a-rdb.dtsi b/arch/arm/dts/fsl-ls1012a-rdb.dtsi
new file mode 100644
index 0000000..71aba78
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1012a-rdb.dtsi
@@ -0,0 +1,39 @@
+/*
+ * Device Tree Include file for Freescale Layerscape-1012A family SoC.
+ *
+ * Copyright (C) 2016, Freescale Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/include/ "fsl-ls1012a.dtsi"
+
+/ {
+ model = "LS1012A RDB Board";
+ aliases {
+ spi0 = &qspi;
+ };
+};
+
+&qspi {
+ bus-num = <0>;
+ status = "okay";
+
+ qflash0: s25fl128s@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&duart0 {
+ status = "okay";
+};
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
new file mode 100644
index 0000000..3f67c28
--- /dev/null
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_LS1012ARDB
+
+config SYS_BOARD
+ default "ls1012ardb"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_SOC
+ default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+ default "ls1012ardb"
+
+endif
diff --git a/board/freescale/ls1012ardb/MAINTAINERS b/board/freescale/ls1012ardb/MAINTAINERS
new file mode 100644
index 0000000..757e810
--- /dev/null
+++ b/board/freescale/ls1012ardb/MAINTAINERS
@@ -0,0 +1,6 @@
+LS1012ARDB BOARD
+M:
+S: Maintained
+F: board/freescale/ls1012ardb/
+F: include/configs/ls1012ardb.h
+F: configs/ls1012ardb_defconfig
diff --git a/board/freescale/ls1012ardb/Makefile b/board/freescale/ls1012ardb/Makefile
new file mode 100644
index 0000000..05fa9d9
--- /dev/null
+++ b/board/freescale/ls1012ardb/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright 2016 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ls1012ardb.o
diff --git a/board/freescale/ls1012ardb/README b/board/freescale/ls1012ardb/README
new file mode 100644
index 0000000..cda03f6
--- /dev/null
+++ b/board/freescale/ls1012ardb/README
@@ -0,0 +1,89 @@
+Overview
+--------
+The LS1012ARDB power supplies (PS) provide all the voltages necessary
+for the correct operation of the LS1012A processor, DDR3L, QSPI memory,
+and other onboard peripherals.
+
+LS1012A SoC Overview
+--------------------
+The LS1012A features an advanced 64-bit ARM v8 Cortex-
+A53 processor, with 32 KB of parity protected L1-I cache,
+32 KB of ECC protected L1-D cache, as well as 256 KB of
+ECC protected L2 cache.
+
+The LS1012A SoC includes the following function and features:
+ - One 64-bit ARM v8 Cortex-A53 core with the following capabilities:
+ - ARM v8 cryptography extensions
+ - One 16-bit DDR3L SDRAM memory controller, Up to 1.0 GT/s, Supports
+ 16-/8-bit operation (no ECC support)
+ - ARM core-link CCI-400 cache coherent interconnect
+ - Packet Forwarding Engine (PFE)
+ - Cryptography acceleration (SEC)
+ - Ethernet interfaces supported by PFE:
+ - One Configurable x3 SerDes:
+ Two Serdes PLLs supported for usage by any SerDes data lane
+ Support for up to 6 GBaud operation
+ - High-speed peripheral interfaces:
+ - One PCI Express Gen2 controller, supporting x1 operation
+ - One serial ATA (SATA Gen 3.0) controller
+ - One USB 3.0/2.0 controller with integrated PHY
+ - One USB 2.0 controller with ULPI interface. .
+ - Additional peripheral interfaces:
+ - One quad serial peripheral interface (QuadSPI) controller
+ - One serial peripheral interface (SPI) controller
+ - Two enhanced secure digital host controllers
+ - Two I2C controllers
+ - One 16550 compliant DUART (two UART interfaces)
+ - Two general purpose IOs (GPIO)
+ - Two FlexTimers
+ - Five synchronous audio interfaces (SAI)
+ - Pre-boot loader (PBL) provides pre-boot initialization and RCW loading
+ - Single-source clocking solution enabling generation of core, platform,
+ DDR, SerDes, and USB clocks from a single external crystal and internal
+ crystaloscillator
+ - Thermal monitor unit (TMU) with +/- 3C accuracy
+ - Two WatchDog timers
+ - ARM generic timer
+ - QorIQ platform's trust architecture 2.1
+
+ LS1012ARDB board Overview
+ -----------------------
+ - SERDES Connections, 4 lanes supporting:
+ - PCI Express - 3.0
+ - SGMII, SGMII 2.5
+ - SATA 3.0
+ - DDR Controller
+ - 6-bit, 1 GB DDR3L SDRAM memory, running at data rates up to 1 GT/s
+ -QSPI: A dual 1:3 switch, NX3L4357GM,115 (U35) drives the QSPI chip-select
+ signals to
+ - QSPI NOR flash memory (2 virtual banks)
+ - the QSPI emulator.s
+ - USB 3.0
+ - one high-speed USB 2.0/3.0 port.
+ - Two enhanced secure digital host controllers:
+ - SDHC1 controller can be connected to onboard SDHC connector
+ - SDHC2 controller: Three dual 1:4 mux/demux devices,
+ 74CBTLV3253DS (U30, U31, U33) drive the SDHC2 signals to eMMC,
+ SDIO WiFi, SPI, and Ardiuno shield
+ - 2 I2C controllers
+ - One SATA onboard connectors
+ - UART
+ - The LS1012A processor consists of two UART controllers,
+ out of which only UART1 is used on RDB.
+ - ARM JTAG support
+
+Booting Options
+---------------
+a) QSPI Flash Emu Boot
+b) QSPI Flash 1
+c) QSPI Flash 2
+
+QSPI flash map
+--------------
+Images | Size |QSPI Flash Address
+------------------------------------------
+RCW + PBI | 1MB | 0x4000_0000
+U-boot | 1MB | 0x4010_0000
+U-boot Env | 1MB | 0x4020_0000
+PPA FIT image | 2MB | 0x4050_0000
+Linux ITB | ~53MB | 0x40A0_0000
diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
new file mode 100644
index 0000000..4a7aaaa
--- /dev/null
+++ b/board/freescale/ls1012ardb/ls1012ardb.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/ppa.h>
+#include <asm/arch/soc.h>
+#include <hwconfig.h>
+#include <ahci.h>
+#include <mmc.h>
+#include <scsi.h>
+#include <fsl_csu.h>
+#include <fsl_esdhc.h>
+#include <environment.h>
+#include <fsl_mmdc.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ u8 in1;
+
+ puts("Board: LS1012ARDB ");
+
+ /* Initialize i2c early for Serial flash bank information */
+ i2c_set_bus_num(0);
+
+ if (i2c_read(I2C_MUX_IO1_ADDR, 1, 1, &in1, 1) < 0) {
+ printf("Error reading i2c boot information!\n");
+ return 0; /* Don't want to hang() on this error */
+ }
+
+ puts("Version");
+ if ((in1 & (~__SW_REV_MASK)) == __SW_REV_A)
+ puts(": RevA");
+ else if ((in1 & (~__SW_REV_MASK)) == __SW_REV_B)
+ puts(": RevB");
+ else
+ puts(": unknown");
+
+ printf(", boot from QSPI");
+ if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_EMU)
+ puts(": emu\n");
+ else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK1)
+ puts(": bank1\n");
+ else if ((in1 & (~__SW_BOOT_MASK)) == __SW_BOOT_BANK2)
+ puts(": bank2\n");
+ else
+ puts("unknown\n");
+
+ return 0;
+}
+
+void mmdc_init(void)
+{
+ struct mmdc_p_regs *mmdc =
+ (struct mmdc_p_regs *)CONFIG_SYS_FSL_DDR_ADDR;
+
+ /* Set MMDC_MDSCR[CON_REQ] */
+ out_be32(&mmdc->mdscr, 0x00008000);
+
+ /* configure timing parms */
+ out_be32(&mmdc->mdotc, 0x12554000);
+ out_be32(&mmdc->mdcfg0, 0xbabf7954);
+ out_be32(&mmdc->mdcfg1, 0xff328f64);
+ out_be32(&mmdc->mdcfg2, 0x01ff00db);
+
+ /* other parms */
+ out_be32(&mmdc->mdmisc, 0x00000680);
+ out_be32(&mmdc->mpmur0, 0x00000800);
+ out_be32(&mmdc->mdrwd, 0x00002000);
+ out_be32(&mmdc->mpodtctrl, 0x0000022a);
+
+ /* out of reset delays */
+ out_be32(&mmdc->mdor, 0x00bf1023);
+
+ /* physical parms */
+ out_be32(&mmdc->mdctl, 0x05180000);
+ out_be32(&mmdc->mdasp, 0x0000007f);
+
+ /* Enable MMDC */
+ out_be32(&mmdc->mdctl, 0x85180000);
+
+ /* dram init sequence: update MRs */
+ out_be32(&mmdc->mdscr, 0x00088032);
+ out_be32(&mmdc->mdscr, 0x00008033);
+ out_be32(&mmdc->mdscr, 0x00048031);
+ out_be32(&mmdc->mdscr, 0x19308030);
+
+ /* dram init sequence: ZQCL */
+ out_be32(&mmdc->mdscr, 0x04008040);
+ out_be32(&mmdc->mpzqhwctrl, 0xa1390003);
+
+ mdelay(100);
+
+ /* Calibrations now: wr lvl */
+ out_be32(&mmdc->mdscr, 0x00848031);
+ out_be32(&mmdc->mdscr, 0x00008200);
+ out_be32(&mmdc->mpwlgcr, 0x00000001);
+
+ mdelay(100);
+
+ out_be32(&mmdc->mdscr, 0x00048031);
+ out_be32(&mmdc->mdscr, 0x00008000);
+
+ /* manual_refresh */
+ out_be32(&mmdc->mdscr, 0x00008020);
+
+ mdelay(100);
+
+ /* Calibrations now: Read DQS gating calibration */
+ out_be32(&mmdc->mdscr, 0x04008050);
+ out_be32(&mmdc->mdscr, 0x00048033);
+ out_be32(&mmdc->mppdcmpr2, 0x00000001);
+ out_be32(&mmdc->mprddlctl, 0x40404040);
+ out_be32(&mmdc->mpdgctrl0, 0x10000000);
+
+ mdelay(100);
+
+ out_be32(&mmdc->mdscr, 0x00008033);
+
+ /* manual_refresh */
+ out_be32(&mmdc->mdscr, 0x00008020);
+
+ mdelay(100);
+
+ /* Calibrations now: Read calibration */
+ out_be32(&mmdc->mdscr, 0x04008050);
+ out_be32(&mmdc->mdscr, 0x00048033);
+ out_be32(&mmdc->mppdcmpr2, 0x00000001);
+ out_be32(&mmdc->mprddlhwctl, 0x00000010);
+
+ mdelay(400);
+
+ out_be32(&mmdc->mdscr, 0x00008033);
+
+ /* manual_refresh */
+ out_be32(&mmdc->mdscr, 0x00008020);
+
+ mdelay(100);
+
+ /* PD, SR */
+ out_be32(&mmdc->mdpdc, 0x00030035);
+ out_be32(&mmdc->mapsr, 0x00001067);
+
+ /* refresh scheme */
+ out_be32(&mmdc->mdref, 0x103e8000);
+
+ mdelay(400);
+
+ /* disable CON_REQ */
+ out_be32(&mmdc->mdscr, 0x0);
+
+ mdelay(50);
+}
+
+int dram_init(void)
+{
+ mmdc_init();
+
+ gd->ram_size = 0x40000000;
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ return pci_eth_init(bis);
+}
+
+int board_early_init_f(void)
+{
+ fsl_lsch2_early_init_f();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+ /*
+ * Set CCI-400 control override register to enable barrier
+ * transaction
+ */
+ out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+
+#ifdef CONFIG_ENV_IS_NOWHERE
+ gd->env_addr = (ulong)&default_environment[0];
+#endif
+
+#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
+ enable_layerscape_ns_access();
+#endif
+
+ return 0;
+}
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ u64 base[CONFIG_NR_DRAM_BANKS];
+ u64 size[CONFIG_NR_DRAM_BANKS];
+
+ /* fixup DT for the two DDR banks */
+ base[0] = gd->bd->bi_dram[0].start;
+ size[0] = gd->bd->bi_dram[0].size;
+ base[1] = gd->bd->bi_dram[1].start;
+ size[1] = gd->bd->bi_dram[1].size;
+
+ fdt_fixup_memory_banks(blob, base, size, 2);
+ ft_cpu_setup(blob, bd);
+
+ return 0;
+}
diff --git a/configs/ls1012ardb_qspi_defconfig b/configs/ls1012ardb_qspi_defconfig
new file mode 100644
index 0000000..f819038
--- /dev/null
+++ b/configs/ls1012ardb_qspi_defconfig
@@ -0,0 +1,10 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012ARDB=y
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+# CONFIG_CMD_IMLS is not set
+CONFIG_SYS_NS16550=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-rdb"
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_SPI=y
diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
index 9ed04f9..3fd360a 100644
--- a/include/configs/ls1012a_common.h
+++ b/include/configs/ls1012a_common.h
@@ -12,7 +12,7 @@
#define CONFIG_LS1012A
#define CONFIG_GICV2
-#define CONFIG_SYS_HAS_SERDES
+#define CONFIG_SYS_HAS_SERDES
#include <asm/arch/config.h>
#define CONFIG_SYS_NO_FLASH
@@ -56,7 +56,6 @@
#define CONFIG_ENV_SPI_MODE 0x03
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH_SPANSION
-#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_FSL_SPI_INTERFACE
#define CONFIG_SF_DATAFLASH
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
new file mode 100644
index 0000000..9ff5935
--- /dev/null
+++ b/include/configs/ls1012ardb.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS1012ARDB_H__
+#define __LS1012ARDB_H__
+
+#include "ls1012a_common.h"
+
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+#define CONFIG_CHIP_SELECTS_PER_CTRL 1
+#define CONFIG_NR_DRAM_BANKS 2
+
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_REALTEK
+#define SGMII_PHY1_ADDR 0x0
+#define RGMII_PHY2_ADDR 0x1
+
+/*
+* USB
+*/
+#define CONFIG_HAS_FSL_XHCI_USB
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
+#endif
+
+/*
+ * I2C IO expander
+ */
+
+#define I2C_MUX_IO1_ADDR 0x24
+#define __SW_BOOT_MASK 0xFC
+#define __SW_BOOT_EMU 0x10
+#define __SW_BOOT_BANK1 0x00
+#define __SW_BOOT_BANK2 0x01
+#define __SW_REV_MASK 0x07
+#define __SW_REV_A 0xF8
+#define __SW_REV_B 0xF0
+
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+
+#endif /* __LS1012ARDB_H__ */
diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h
index 72a5d5b..7ab88c3 100644
--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -62,7 +62,7 @@ struct fsl_xhci {
#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS2080A_XHCI_USB1_ADDR
#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS2080A_XHCI_USB2_ADDR
#define CONFIG_SYS_FSL_XHCI_USB3_ADDR 0
-#elif defined(CONFIG_LS1043A)
+#elif defined(CONFIG_LS1043A) || defined(CONFIG_LS1012A)
#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS1043A_XHCI_USB1_ADDR
#define CONFIG_SYS_FSL_XHCI_USB2_ADDR CONFIG_SYS_LS1043A_XHCI_USB2_ADDR
#define CONFIG_SYS_FSL_XHCI_USB3_ADDR CONFIG_SYS_LS1043A_XHCI_USB3_ADDR
--
1.7.9.5
Reference in a new issue View git blame Copy permalink