openwrtv4/target/linux/lantiq/dts/FRITZ7320.dts
blogic b7fc892eb5 lantiq: move partitions into partion table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
2016-05-10 10:43:12 +02:00

155 lines
2.7 KiB
Text

/dts-v1/;
/include/ "ar9.dtsi"
/ {
model = "FRITZ7320 - 1&1 HomeServer";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power;
failsafe = &power;
running = &power;
internet = &info_green;
dsl = &power;
wifi = &wlan;
};
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x1000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "urlader";
reg = <0x00000 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0xf60000>;
};
partition@f80000 {
label = "tffs (1)";
reg = <0xf80000 0x40000>;
read-only;
};
partition@fc0000 {
label = "tffs (2)";
reg = <0xfc0000 0x40000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci {
lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
lantiq,function = "pci";
};
pci-in {
lantiq,groups = "req1", "req2", "req3", "req4";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
lantiq,output = <1>;
lantiq,pull = <0>;
};
};
};
etop@E180000 {
phy-mode = "mii";
mac-address = [ 00 11 22 33 44 55 ];
};
ifxhcd@E101000 {
status = "okay";
};
pci@E105400 {
status = "okay";
req-mask = <0xf>;
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
gpio-reset = <&gpio 21 0>;
req-mask = <0xf>; /* GNT1 */
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 1 1>;
linux,code = <0xf7>;
};
dect {
label = "dect";
gpios = <&gpio 2 1>;
linux,code = <0x102>;
};
};
gpio-leds {
compatible = "gpio-leds";
power: power {
label = "fritz7320:green:power";
gpios = <&gpio 44 1>;
default-state = "keep";
};
voice {
label = "fritz7320:green:fon";
gpios = <&gpio 47 1>;
};
dect {
label = "fritz7320:green:dect";
gpios = <&gpio 38 1>;
};
wlan: wlan {
label = "fritz7320:green:wlan";
gpios = <&gpio 37 1>;
};
info_green: info_green {
label = "fritz7320:green:info";
gpios = <&gpio 35 1>;
};
info_red {
label = "fritz7320:red:info";
gpios = <&gpio 45 1>;
};
};
};