openwrtv4/target/linux/ramips/dts/GL-MT300A.dts
Daniel Golle d57223259b ramips: replace remaining instances of ralink, port-map
Some boards were apparently forgotten when ralink,portmap was renamed
to mediatek,portmap -- probably because they used the long obsolete
ralink,port-map attribute.
If this commit breaks ethernet wan/lan assignment, this is because
the port-map attribute wasn't actually parsed, you'll have to replace
"wllll" by "llllw" in the dts file belonging to that board (and send
a patch doing that!)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-02-15 09:12:40 +01:00

150 lines
2 KiB
Text

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "GL-MT300A", "ralink,mt7620a-soc";
model = "GL-MT300A";
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
wan {
label = "gl-mt300a:wan";
gpios = <&gpio2 0 1>;
};
lan {
label = "gl-mt300a:lan";
gpios = <&gpio2 1 1>;
};
wlan {
label = "gl-mt300a:wlan";
gpios = <&gpio3 0 1>;
};
usb {
label = "gl-mt300a:usb";
gpios = <&gpio0 7 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 13 1>;
linux,code = <KEY_RESTART>;
};
BTN_0 {
label = "BTN_0";
gpios = <&gpio0 1 1>;
linux,code = <BTN_0>;
};
BTN_1 {
label = "BTN_1";
gpios = <&gpio0 2 1>;
linux,code = <BTN_1>;
};
};
};
&gpio0 {
status = "okay";
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xf80000>;
};
partition@ff0000 {
label = "art";
reg = <0xff0000 0x10000>;
};
};
};
&sdhci {
status = "okay";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4000>;
mediatek,portmap = "wllll";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wled","ephy","uartf","i2c";
ralink,function = "gpio";
};
};
};