openwrtv4/package/mac80211/patches/311-pending_work.patch
2010-11-23 02:13:54 +00:00

273 lines
9.2 KiB
Diff

--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -766,14 +766,6 @@ void ath9k_hw_startpcureceive(struct ath
}
EXPORT_SYMBOL(ath9k_hw_startpcureceive);
-void ath9k_hw_stoppcurecv(struct ath_hw *ah)
-{
- REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_DIS);
-
- ath9k_hw_disable_mib_counters(ah);
-}
-EXPORT_SYMBOL(ath9k_hw_stoppcurecv);
-
void ath9k_hw_abortpcurecv(struct ath_hw *ah)
{
REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_ABORT | AR_DIAG_RX_DIS);
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -691,7 +691,6 @@ void ath9k_hw_setuprxdesc(struct ath_hw
bool ath9k_hw_setrxabort(struct ath_hw *ah, bool set);
void ath9k_hw_putrxbuf(struct ath_hw *ah, u32 rxdp);
void ath9k_hw_startpcureceive(struct ath_hw *ah, bool is_scanning);
-void ath9k_hw_stoppcurecv(struct ath_hw *ah);
void ath9k_hw_abortpcurecv(struct ath_hw *ah);
bool ath9k_hw_stopdmarecv(struct ath_hw *ah);
int ath9k_hw_beaconq_setup(struct ath_hw *ah);
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -518,7 +518,7 @@ bool ath_stoprecv(struct ath_softc *sc)
bool stopped;
spin_lock_bh(&sc->rx.rxbuflock);
- ath9k_hw_stoppcurecv(ah);
+ ath9k_hw_abortpcurecv(ah);
ath9k_hw_setrxfilter(ah, 0);
stopped = ath9k_hw_stopdmarecv(ah);
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -163,6 +163,7 @@ static void ath_tx_flush_tid(struct ath_
bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
list_move_tail(&bf->list, &bf_head);
+ spin_unlock_bh(&txq->axq_lock);
fi = get_frame_info(bf->bf_mpdu);
if (fi->retries) {
ath_tx_update_baw(sc, tid, fi->seqno);
@@ -170,6 +171,7 @@ static void ath_tx_flush_tid(struct ath_
} else {
ath_tx_send_normal(sc, txq, tid, &bf_head);
}
+ spin_lock_bh(&txq->axq_lock);
}
spin_unlock_bh(&txq->axq_lock);
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -349,6 +349,7 @@ struct ieee80211_if_managed {
struct work_struct chswitch_work;
struct work_struct beacon_connection_loss_work;
+ unsigned long beacon_timeout;
unsigned long probe_timeout;
int probe_send_count;
@@ -1269,6 +1270,8 @@ void ieee80211_send_nullfunc(struct ieee
int powersave);
void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
struct ieee80211_hdr *hdr);
+void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_hdr *hdr);
void ieee80211_beacon_connection_loss_work(struct work_struct *work);
void ieee80211_wake_queues_by_reason(struct ieee80211_hw *hw,
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -28,13 +28,19 @@
#include "rate.h"
#include "led.h"
+#define IEEE80211_MAX_NULLFUNC_TRIES 2
#define IEEE80211_MAX_PROBE_TRIES 5
/*
- * beacon loss detection timeout
- * XXX: should depend on beacon interval
+ * Beacon loss timeout is calculated as N frames times the
+ * advertised beacon interval. This may need to be somewhat
+ * higher than what hardware might detect to account for
+ * delays in the host processing frames. But since we also
+ * probe on beacon miss before declaring the connection lost
+ * default to what we want.
*/
-#define IEEE80211_BEACON_LOSS_TIME (2 * HZ)
+#define IEEE80211_BEACON_LOSS_COUNT 7
+
/*
* Time the connection can be idle before we probe
* it to see if we can still talk to the AP.
@@ -121,7 +127,7 @@ void ieee80211_sta_reset_beacon_monitor(
return;
mod_timer(&sdata->u.mgd.bcn_mon_timer,
- round_jiffies_up(jiffies + IEEE80211_BEACON_LOSS_TIME));
+ round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
}
void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
@@ -871,6 +877,9 @@ static void ieee80211_set_associated(str
bss_info_changed |= ieee80211_handle_bss_capability(sdata,
cbss->capability, bss->has_erp_value, bss->erp_value);
+ sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
+ IEEE80211_BEACON_LOSS_COUNT * bss_conf->beacon_int));
+
sdata->u.mgd.associated = cbss;
memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
@@ -1026,6 +1035,51 @@ void ieee80211_sta_rx_notify(struct ieee
ieee80211_sta_reset_conn_monitor(sdata);
}
+static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+ if (!(ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
+ IEEE80211_STA_CONNECTION_POLL)))
+ return;
+
+ ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+ IEEE80211_STA_BEACON_POLL);
+ mutex_lock(&sdata->local->iflist_mtx);
+ ieee80211_recalc_ps(sdata->local, -1);
+ mutex_unlock(&sdata->local->iflist_mtx);
+
+ if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
+ return;
+
+ /*
+ * We've received a probe response, but are not sure whether
+ * we have or will be receiving any beacons or data, so let's
+ * schedule the timers again, just in case.
+ */
+ ieee80211_sta_reset_beacon_monitor(sdata);
+
+ mod_timer(&ifmgd->conn_mon_timer,
+ round_jiffies_up(jiffies +
+ IEEE80211_CONNECTION_IDLE_TIME));
+}
+
+void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_hdr *hdr)
+{
+ if (!ieee80211_is_data(hdr->frame_control) &&
+ !ieee80211_is_nullfunc(hdr->frame_control))
+ return;
+
+ ieee80211_sta_reset_conn_monitor(sdata);
+
+ if (ieee80211_is_nullfunc(hdr->frame_control) &&
+ sdata->u.mgd.probe_send_count > 0) {
+ sdata->u.mgd.probe_send_count = 0;
+ ieee80211_queue_work(&sdata->local->hw, &sdata->work);
+ }
+}
+
static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -1041,8 +1095,19 @@ static void ieee80211_mgd_probe_ap_send(
if (ifmgd->probe_send_count >= unicast_limit)
dst = NULL;
- ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
- ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid[1], NULL, 0);
+ /*
+ * When the hardware reports an accurate Tx ACK status, it's
+ * better to send a nullfunc frame instead of a probe request,
+ * as it will kick us off the AP quickly if we aren't associated
+ * anymore. The timeout will be reset if the frame is ACKed by
+ * the AP.
+ */
+ if (sdata->local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
+ ieee80211_send_nullfunc(sdata->local, sdata, 0);
+ else {
+ ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
+ ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid[1], NULL, 0);
+ }
ifmgd->probe_send_count++;
ifmgd->probe_timeout = jiffies + IEEE80211_PROBE_WAIT;
@@ -1509,29 +1574,8 @@ static void ieee80211_rx_mgmt_probe_resp
ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false);
if (ifmgd->associated &&
- memcmp(mgmt->bssid, ifmgd->associated->bssid, ETH_ALEN) == 0 &&
- ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
- IEEE80211_STA_CONNECTION_POLL)) {
- ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
- mutex_lock(&sdata->local->iflist_mtx);
- ieee80211_recalc_ps(sdata->local, -1);
- mutex_unlock(&sdata->local->iflist_mtx);
-
- if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
- return;
-
- /*
- * We've received a probe response, but are not sure whether
- * we have or will be receiving any beacons or data, so let's
- * schedule the timers again, just in case.
- */
- ieee80211_sta_reset_beacon_monitor(sdata);
-
- mod_timer(&ifmgd->conn_mon_timer,
- round_jiffies_up(jiffies +
- IEEE80211_CONNECTION_IDLE_TIME));
- }
+ memcmp(mgmt->bssid, ifmgd->associated->bssid, ETH_ALEN) == 0)
+ ieee80211_reset_ap_probe(sdata);
}
/*
@@ -1881,12 +1925,23 @@ void ieee80211_sta_work(struct ieee80211
IEEE80211_STA_CONNECTION_POLL) &&
ifmgd->associated) {
u8 bssid[ETH_ALEN];
+ int max_tries;
+
+ if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
+ max_tries = IEEE80211_MAX_NULLFUNC_TRIES;
+ else
+ max_tries = IEEE80211_MAX_PROBE_TRIES;
memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
- if (time_is_after_jiffies(ifmgd->probe_timeout))
+
+ /* ACK received for nullfunc probing frame */
+ if (!ifmgd->probe_send_count)
+ ieee80211_reset_ap_probe(sdata);
+
+ else if (time_is_after_jiffies(ifmgd->probe_timeout))
run_again(ifmgd, ifmgd->probe_timeout);
- else if (ifmgd->probe_send_count < IEEE80211_MAX_PROBE_TRIES) {
+ else if (ifmgd->probe_send_count < max_tries) {
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
wiphy_debug(local->hw.wiphy,
"%s: No probe response from AP %pM"
@@ -2012,6 +2067,8 @@ void ieee80211_sta_restart(struct ieee80
add_timer(&ifmgd->timer);
if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running))
add_timer(&ifmgd->chswitch_timer);
+ ieee80211_sta_reset_beacon_monitor(sdata);
+ ieee80211_send_nullfunc(sdata->local, sdata, 0);
}
#endif
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -155,6 +155,10 @@ static void ieee80211_frame_acked(struct
ieee80211_queue_work(&local->hw, &local->recalc_smps);
}
+
+ if ((sdata->vif.type == NL80211_IFTYPE_STATION) &&
+ (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS))
+ ieee80211_sta_tx_notify(sdata, (void *) skb->data);
}
void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)