KumiSystems/openwrtv4
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv4/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
David Bauer b4bf43c667 ar71xx: add support for Fritz!WLAN Repeater 450E 
This commit adds support for the AVM Fritz!WLAN Repeater 450E

SOC:    Qualcomm QCA9556 (Scorpion) 560MHz MIPS74Kc
RAM:    64MB Zentel A3R12E40CBF DDR2
FLASH:  16MiB Winbond W25Q128 SPI NOR
WLAN1:  QCA9556 2.4 GHz 802.11b/g/n 3x3
INPUT:  WPS button
LED:    Power, WiFi, LAN, RSSI indicator
Serial: Header Next to Black metal shield
        Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
        The Serial setting is 115200-8-N-1.

Tested and working:
 - Ethernet
 - 2.4GHz WiFi (correct MAC)
 - Installation via EVA bootloader
 - OpenWRT sysupgrade
 - Buttons
 - Most LEDs

Not working:
 - 2 RSSI LEDs
   AVM used for RSSI{0,1} two of the Ethernet PHYs LEDs which they
   control over MDIO. Our driver doesn't expose these LEDs as GPIOs.
   While it is possible to implement this feature, it would require an
   additional kernel patch for a minor functionality.

Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 192.168.178.1. Firmware can be uploaded
like following:

  ftp> quote USER adam2
  ftp> quote PASS adam2
  ftp> binary
  ftp> debug
  ftp> passive
  ftp> quote MEDIA FLSH
  ftp> put openwrt-sysupgrade.bin mtd1

Note that this procedure might take up to two minutes.
You need to powercycle the Device afterwards to boot OpenWRT.

Signed-off-by: David Bauer <mail@david-bauer.net>
2018-06-18 23:23:30 +02:00

882 lines
15 KiB
Bash
Executable file
Raw Blame History

#
# Copyright (C) 2011 OpenWrt.org
#
. /lib/functions/system.sh
. /lib/ar71xx.sh
PART_NAME=firmware
RAMFS_COPY_DATA=/lib/ar71xx.sh
RAMFS_COPY_BIN='nandwrite'
CI_BLKSZ=65536
CI_LDADR=0x80060000
PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0
platform_find_partitions() {
local first dev size erasesize name
while read dev size erasesize name; do
name=${name#'"'}; name=${name%'"'}
case "$name" in
vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin|rootfs|filesystem)
if [ -z "$first" ]; then
first="$name"
else
echo "$erasesize:$first:$name"
break
fi
;;
esac
done < /proc/mtd
}
platform_find_kernelpart() {
local part
for part in "${1%:*}" "${1#*:}"; do
case "$part" in
vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin)
echo "$part"
break
;;
esac
done
}
platform_find_rootfspart() {
local part
for part in "${1%:*}" "${1#*:}"; do
[ "$part" != "$2" ] && echo "$part" && break
done
}
platform_do_upgrade_combined() {
local partitions=$(platform_find_partitions)
local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}"
local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
local kern_blocks=$(($kern_length / $CI_BLKSZ))
local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ))
if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \
[ ${kern_blocks:-0} -gt 0 ] && \
[ ${root_blocks:-0} -gt 0 ] && \
[ ${erase_size:-0} -gt 0 ];
then
local rootfspart=$(platform_find_rootfspart "$partitions" "$kernelpart")
local append=""
[ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
if [ "$PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD" -ne 1 ]; then
( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \
dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \
mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions
elif [ -n "$rootfspart" ]; then
dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null | \
mtd write - $kernelpart
dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null | \
mtd -r $append write - $rootfspart
fi
fi
PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0
}
tplink_get_image_hwid() {
get_image "$@" | dd bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
}
tplink_get_image_mid() {
get_image "$@" | dd bs=4 count=1 skip=17 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
}
tplink_get_image_boot_size() {
get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
}
tplink_pharos_check_support_list() {
local image="$1"
local offset="$2"
local model="$3"
# Here $image is given to dd directly instead of using get_image;
# otherwise the skip will take almost a second (as dd can't seek)
dd if="$image" bs=1 skip=$offset count=1024 2>/dev/null | (
while IFS= read -r line; do
[ "$line" = "$model" ] && exit 0
done
exit 1
)
}
tplink_pharos_check_image() {
local magic_long="$(get_magic_long "$1")"
[ "$magic_long" != "7f454c46" ] && {
echo "Invalid image magic '$magic_long'"
return 1
}
local model_string="$(tplink_pharos_get_model_string)"
# New images have the support list at 7802888, old ones at 1511432
tplink_pharos_check_support_list "$1" 7802888 "$model_string" || \
tplink_pharos_check_support_list "$1" 1511432 "$model_string" || {
echo "Unsupported image (model not in support-list)"
return 1
}
return 0
}
seama_get_type_magic() {
get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
}
wrgg_get_image_magic() {
get_image "$@" | dd bs=4 count=1 skip=8 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
}
cybertan_get_image_magic() {
get_image "$@" | dd bs=8 count=1 skip=0 2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"'
}
cybertan_check_image() {
local magic="$(cybertan_get_image_magic "$1")"
local fw_magic="$(cybertan_get_hw_magic)"
[ "$fw_magic" != "$magic" ] && {
echo "Invalid image, ID mismatch, got:$magic, but need:$fw_magic"
return 1
}
return 0
}
platform_do_upgrade_compex() {
local fw_file=$1
local fw_part=$PART_NAME
local fw_mtd=$(find_mtd_part $fw_part)
local fw_length=0x$(dd if="$fw_file" bs=2 skip=1 count=4 2>/dev/null)
local fw_blocks=$(($fw_length / 65536))
if [ -n "$fw_mtd" ] && [ ${fw_blocks:-0} -gt 0 ]; then
local append=""
[ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 ] && append="-j $CONF_TAR"
sync
dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \
mtd $append write - "$fw_part"
fi
}
alfa_check_image() {
local magic_long="$(get_magic_long "$1")"
local fw_part_size=$(mtd_get_part_size firmware)
case "$magic_long" in
"27051956")
[ "$fw_part_size" != "16318464" ] && {
echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes"
return 1
}
;;
"68737173")
[ "$fw_part_size" != "7929856" ] && {
echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes"
return 1
}
;;
esac
return 0
}
platform_check_image() {
local board=$(board_name)
local magic="$(get_magic_word "$1")"
local magic_long="$(get_magic_long "$1")"
[ "$#" -gt 1 ] && return 1
case "$board" in
airgateway|\
airgatewaypro|\
airrouter|\
ap121f|\
ap132|\
ap531b0|\
ap90q|\
archer-c25-v1|\
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
archer-c60-v2|\
archer-c7-v4|\
bullet-m|\
c-55|\
carambola2|\
cf-e316n-v2|\
cf-e320n-v2|\
cf-e355ac-v1|\
cf-e355ac-v2|\
cf-e375ac|\
cf-e380ac-v1|\
cf-e380ac-v2|\
cf-e385ac|\
cf-e520n|\
cf-e530n|\
cpe505n|\
cpe830|\
cpe870|\
dap-1330-a1|\
dgl-5500-a1|\
dhp-1565-a1|\
dir-505-a1|\
dir-600-a1|\
dir-615-c1|\
dir-615-e1|\
dir-615-e4|\
dir-615-i1|\
dir-825-c1|\
dir-835-a1|\
dlan-hotspot|\
dlan-pro-1200-ac|\
dlan-pro-500-wp|\
dr342|\
dr531|\
dragino2|\
e1700ac-v2|\
e600g-v2|\
e600gac-v2|\
ebr-2310-c1|\
ens202ext|\
epg5000|\
esr1750|\
esr900|\
ew-balin|\
ew-dorin|\
ew-dorin-router|\
gl-ar150|\
gl-ar300m|\
gl-ar300|\
gl-ar750|\
gl-ar750s|\
gl-domino|\
gl-mifi|\
gl-usb150|\
hiwifi-hc6361|\
hornet-ub-x2|\
jwap230|\
lbe-m5|\
lima|\
loco-m-xw|\
mzk-w04nu|\
mzk-w300nh|\
n5q|\
nanostation-m|\
nanostation-m-xw|\
nbg460n_550n_550nh|\
pqi-air-pen|\
r36a|\
r602n|\
rme-eg200|\
rocket-m|\
rocket-m-ti|\
rocket-m-xw|\
rw2458n|\
sc1750|\
sc300m|\
sc450|\
sr3200|\
t830|\
tew-632brp|\
tew-712br|\
tew-732br|\
tew-823dru|\
tl-wr1043n-v5|\
tl-wr942n-v1|\
unifi|\
unifi-outdoor|\
unifiac-lite|\
unifiac-pro|\
wam250|\
weio|\
whr-g301n|\
whr-hp-g300n|\
whr-hp-gn|\
wlae-ag300n|\
wndap360|\
wpj342|\
wpj344|\
wpj531|\
wpj558|\
wpj563|\
wrt400n|\
wrtnode2q|\
wzr-450hp2|\
wzr-hp-ag300h|\
wzr-hp-g300nh|\
wzr-hp-g300nh2|\
wzr-hp-g450h|\
xd3200)
[ "$magic" != "2705" ] && {
echo "Invalid image type."
return 1
}
return 0
;;
alfa-ap96|\
alfa-nx|\
ap121|\
ap121-mini|\
ap135-020|\
ap136-010|\
ap136-020|\
ap147-010|\
ap152|\
ap91-5g|\
ap96|\
arduino-yun|\
bhr-4grv2|\
bxu2000n-2-a1|\
db120|\
dr344|\
dw33d|\
f9k1115v2|\
hornet-ub|\
mr12|\
mr16|\
zbt-we1526|\
zcn-1523h-2|\
zcn-1523h-5)
[ "$magic_long" != "68737173" -a "$magic_long" != "19852003" ] && {
echo "Invalid image type."
return 1
}
return 0
;;
all0258n|\
all0315n|\
cap324|\
cap4200ag|\
cr3000|\
cr5000)
platform_check_image_allnet "$1" && return 0
return 1
;;
all0305|\
eap300v2|\
eap7660d|\
ja76pf|\
ja76pf2|\
jwap003|\
ls-sr71|\
pb42|\
pb44|\
routerstation|\
routerstation-pro|\
wp543|\
wpe72)
[ "$magic" != "4349" ] && {
echo "Invalid image. Use *-sysupgrade.bin files on this board"
return 1
}
local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null)
local md5_chk=$(dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}"
if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then
return 0
else
echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)"
return 1
fi
return 0
;;
antminer-s1|\
antminer-s3|\
antrouter-r1|\
archer-c5|\
archer-c7|\
el-m150|\
el-mini|\
gl-inet|\
lan-turtle|\
mc-mac1200r|\
minibox-v1|\
omy-g1|\
omy-x1|\
onion-omega|\
oolite-v1|\
oolite-v5.2|\
oolite-v5.2-dev|\
packet-squirrel|\
re355|\
re450|\
rut900|\
smart-300|\
som9331|\
tellstick-znet-lite|\
tl-mr10u|\
tl-mr11u|\
tl-mr12u|\
tl-mr13u|\
tl-mr3020|\
tl-mr3040|\
tl-mr3040-v2|\
tl-mr3220|\
tl-mr3220-v2|\
tl-mr3420|\
tl-mr3420-v2|\
tl-mr6400|\
tl-wa701nd-v2|\
tl-wa7210n-v2|\
tl-wa750re|\
tl-wa7510n|\
tl-wa801nd-v2|\
tl-wa801nd-v3|\
tl-wa830re-v2|\
tl-wa850re|\
tl-wa850re-v2|\
tl-wa855re-v1|\
tl-wa860re|\
tl-wa901nd|\
tl-wa901nd-v2|\
tl-wa901nd-v3|\
tl-wa901nd-v4|\
tl-wa901nd-v5|\
tl-wdr3320-v2|\
tl-wdr3500|\
tl-wdr4300|\
tl-wdr4900-v2|\
tl-wdr6500-v2|\
tl-wpa8630|\
tl-wr1041n-v2|\
tl-wr1043nd|\
tl-wr1043nd-v2|\
tl-wr1043nd-v4|\
tl-wr2543n|\
tl-wr703n|\
tl-wr710n|\
tl-wr720n-v3|\
tl-wr740n-v6|\
tl-wr741nd|\
tl-wr741nd-v4|\
tl-wr802n-v1|\
tl-wr802n-v2|\
tl-wr810n|\
tl-wr810n-v2|\
tl-wr840n-v2|\
tl-wr840n-v3|\
tl-wr841n-v1|\
tl-wr841n-v7|\
tl-wr841n-v8|\
tl-wr841n-v9|\
tl-wr841n-v11|\
tl-wr842n-v2|\
tl-wr842n-v3|\
tl-wr902ac-v1|\
tl-wr940n-v4|\
tl-wr940n-v6|\
tl-wr941nd|\
tl-wr941nd-v5|\
tl-wr941nd-v6|\
ts-d084|\
wifi-pineapple-nano)
local magic_ver="0100"
case "$board" in
tl-wdr6500-v2)
magic_ver="0200"
;;
esac
[ "$magic" != "$magic_ver" ] && {
echo "Invalid image type."
return 1
}
local hwid
local mid
local imagehwid
local imagemid
hwid=$(tplink_get_hwid)
mid=$(tplink_get_mid)
imagehwid=$(tplink_get_image_hwid "$1")
imagemid=$(tplink_get_image_mid "$1")
[ "$hwid" != "$imagehwid" -o "$mid" != "$imagemid" ] && {
echo "Invalid image, hardware ID mismatch, hw:$hwid $mid image:$imagehwid $imagemid."
return 1
}
local boot_size
boot_size=$(tplink_get_image_boot_size "$1")
[ "$boot_size" != "00000000" ] && {
echo "Invalid image, it contains a bootloader."
return 1
}
return 0
;;
bsb|\
dir-825-b1|\
tew-673gru)
dir825b_check_image "$1" && return 0
;;
rb-411|\
rb-411u|\
rb-433|\
rb-433u|\
rb-435g|\
rb-450|\
rb-450g|\
rb-493|\
rb-493g|\
rb-750|\
rb-750gl|\
rb-751|\
rb-751g|\
rb-911g-2hpnd|\
rb-911g-5hpnd|\
rb-911g-5hpacd|\
rb-912uag-2hpnd|\
rb-912uag-5hpnd|\
rb-921gs-5hpacd-r2|\
rb-951g-2hnd|\
rb-951ui-2hnd|\
rb-2011l|\
rb-2011il|\
rb-2011ils|\
rb-2011uas|\
rb-2011uas-2hnd|\
rb-2011uias|\
rb-2011uias-2hnd|\
rb-sxt2n|\
rb-sxt5n)
nand_do_platform_check routerboard $1
return $?
;;
c-60|\
hiveap-121|\
nbg6716|\
r6100|\
rambutan|\
wi2a-ac200i|\
wndr3700v4|\
wndr4300)
nand_do_platform_check $board $1
return $?
;;
cpe210|\
cpe510|\
eap120|\
wbs210|\
wbs510)
tplink_pharos_check_image "$1" && return 0
return 1
;;
a40|\
a60|\
mr1750|\
mr1750v2|\
mr600|\
mr600v2|\
mr900|\
mr900v2|\
om2p|\
om2p-hs|\
om2p-hsv2|\
om2p-hsv3|\
om2p-hsv4|\
om2p-lc|\
om2pv2|\
om2pv4|\
om5p|\
om5p-ac|\
om5p-acv2|\
om5p-an)
platform_check_image_openmesh "$magic_long" "$1" && return 0
return 1
;;
mr18|\
z1)
merakinand_do_platform_check $board $1
return $?
;;
dir-869-a1|\
mynet-n600|\
mynet-n750|\
qihoo-c301)
[ "$magic_long" != "5ea3a417" ] && {
echo "Invalid image, bad magic: $magic_long"
return 1
}
local typemagic=$(seama_get_type_magic "$1")
[ "$typemagic" != "6669726d" ] && {
echo "Invalid image, bad type: $typemagic"
return 1
}
return 0
;;
e2100l|\
mynet-rext|\
wrt160nl)
cybertan_check_image "$1" && return 0
return 1
;;
nbg6616|\
uap-pro|\
unifi-outdoor-plus)
[ "$magic_long" != "19852003" ] && {
echo "Invalid image type."
return 1
}
return 0
;;
tube2h)
alfa_check_image "$1" && return 0
return 1
;;
wndr3700|\
wnr1000-v2|\
wnr2000-v3|\
wnr612-v2|\
wpn824n)
local hw_magic
hw_magic="$(ar71xx_get_mtd_part_magic firmware)"
[ "$magic_long" != "$hw_magic" ] && {
echo "Invalid image, hardware ID mismatch, hw:$hw_magic image:$magic_long."
return 1
}
return 0
;;
wnr2000-v4)
[ "$magic_long" != "32303034" ] && {
echo "Invalid image type."
return 1
}
return 0
;;
wnr2200)
[ "$magic_long" != "32323030" ] && {
echo "Invalid image type."
return 1
}
return 0
;;
dap-2695-a1)
local magic=$(wrgg_get_image_magic "$1")
[ "$magic" != "21030820" ] && {
echo "Invalid image, bad type: $magic"
return 1
}
return 0;
;;
# these boards use metadata images
fritz300e|\
fritz4020|\
fritz450e|\
koala|\
rb-750-r2|\
rb-750p-pbr2|\
rb-750up-r2|\
rb-911-2hn|\
rb-911-5hn|\
rb-941-2nd|\
rb-951ui-2nd|\
rb-952ui-5ac2nd|\
rb-962uigs-5hact2hnt|\
rb-lhg-5nd|\
rb-map-2nd|\
rb-mapl-2nd|\
rb-wap-2nd|\
rb-wapg-5hact2hnd)
return 0
;;
esac
echo "Sysupgrade is not yet supported on $board."
return 1
}
platform_pre_upgrade() {
local board=$(board_name)
case "$board" in
rb-750-r2|\
rb-750p-pbr2|\
rb-750up-r2|\
rb-911-2hn|\
rb-911-5hn|\
rb-941-2nd|\
rb-951ui-2nd|\
rb-952ui-5ac2nd|\
rb-962uigs-5hact2hnt|\
rb-lhg-5nd|\
rb-map-2nd|\
rb-mapl-2nd|\
rb-wap-2nd|\
rb-wapg-5hact2hnd)
# erase firmware if booted from initramfs
[ -z "$(rootfs_type)" ] && mtd erase firmware
;;
esac
}
platform_nand_pre_upgrade() {
local board=$(board_name)
case "$board" in
rb*)
CI_KERNPART=none
local fw_mtd=$(find_mtd_part kernel)
fw_mtd="${fw_mtd/block/}"
[ -n "$fw_mtd" ] || return
mtd erase kernel
tar xf "$1" sysupgrade-routerboard/kernel -O | nandwrite -o "$fw_mtd" -
;;
wi2a-ac200i)
case "$(fw_printenv -n dualPartition)" in
imgA)
fw_setenv dualPartition imgB
fw_setenv ActImg NokiaImageB
;;
imgB)
fw_setenv dualPartition imgA
fw_setenv ActImg NokiaImageA
;;
esac
ubiblock -r /dev/ubiblock0_0 2>/dev/null >/dev/null
rm -f /dev/ubiblock0_0
ubidetach -d 0 2>/dev/null >/dev/null
CI_UBIPART=ubi_alt
CI_KERNPART=kernel_alt
;;
esac
}
platform_do_upgrade() {
local board=$(board_name)
case "$board" in
all0258n)
platform_do_upgrade_allnet "0x9f050000" "$ARGV"
;;
all0305|\
eap7660d|\
ja76pf|\
ja76pf2|\
jwap003|\
ls-sr71|\
pb42|\
pb44|\
routerstation|\
routerstation-pro)
platform_do_upgrade_combined "$ARGV"
;;
all0315n)
platform_do_upgrade_allnet "0x9f080000" "$ARGV"
;;
cap4200ag|\
eap300v2|\
ens202ext)
platform_do_upgrade_allnet "0xbf0a0000" "$ARGV"
;;
dir-825-b1|\
tew-673gru)
platform_do_upgrade_dir825b "$ARGV"
;;
a40|\
a60|\
mr1750|\
mr1750v2|\
mr600|\
mr600v2|\
mr900|\
mr900v2|\
om2p|\
om2p-hs|\
om2p-hsv2|\
om2p-hsv3|\
om2p-hsv4|\
om2p-lc|\
om2pv2|\
om2pv4|\
om5p|\
om5p-ac|\
om5p-acv2|\
om5p-an)
platform_do_upgrade_openmesh "$ARGV"
;;
c-60|\
hiveap-121|\
nbg6716|\
r6100|\
rambutan|\
rb-411|\
rb-411u|\
rb-433|\
rb-433u|\
rb-435g|\
rb-450|\
rb-450g|\
rb-493|\
rb-493g|\
rb-750|\
rb-750gl|\
rb-751|\
rb-751g|\
rb-911g-2hpnd|\
rb-911g-5hpacd|\
rb-911g-5hpnd|\
rb-912uag-2hpnd|\
rb-912uag-5hpnd|\
rb-921gs-5hpacd-r2|\
rb-951g-2hnd|\
rb-951ui-2hnd|\
rb-2011il|\
rb-2011ils|\
rb-2011l|\
rb-2011uas|\
rb-2011uas-2hnd|\
rb-2011uias|\
rb-2011uias-2hnd|\
rb-sxt2n|\
rb-sxt5n|\
wi2a-ac200i|\
wndr3700v4|\
wndr4300)
nand_do_upgrade "$1"
;;
mr18|\
z1)
merakinand_do_upgrade "$1"
;;
uap-pro|\
unifi-outdoor-plus)
MTD_CONFIG_ARGS="-s 0x180000"
default_do_upgrade "$ARGV"
;;
wp543|\
wpe72)
platform_do_upgrade_compex "$ARGV"
;;
*)
default_do_upgrade "$ARGV"
;;
esac
}
Reference in a new issue View git blame Copy permalink