openwrtv4/target/linux/brcm63xx/dts/dgnd3700v1.dts
Jonas Gorski b43c190079 brcm63xx: probe SPI connected switches through DT
Now that we can configure the switches through DT, do so.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-06-10 12:40:38 +02:00

171 lines
2.7 KiB
Text

/dts-v1/;
#include "bcm6368.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Netgear DGND3700v1/DGND3800B";
compatible = "netgear,dgnd3700v1", "brcm,bcm6368";
chosen {
bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
wlan {
label = "wlan";
gpios = <&pinctrl 10 1>;
linux,code = <KEY_WLAN>;
};
reset {
label = "reset";
gpios = <&pinctrl 12 1>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&pinctrl 35 1>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
dsl_green {
label = "DGND3700v1_3800B:green:dsl";
gpios = <&pinctrl 2 1>;
};
inet_red {
label = "DGND3700v1_3800B:red:inet";
gpios = <&pinctrl 4 1>;
};
inet_green {
label = "DGND3700v1_3800B:green:inet";
gpios = <&pinctrl 5 1>;
};
wps_green {
label = "DGND3700v1_3800B:green:wps";
gpios = <&pinctrl 11 1>;
};
usbfront_green {
label = "DGND3700v1_3800B:green:usb-front";
gpios = <&pinctrl 13 1>;
};
usbback_green {
label = "DGND3700v1_3800B:green:usb-back";
gpios = <&pinctrl 14 1>;
};
power_red {
label = "DGND3700v1_3800B:red:power";
gpios = <&pinctrl 22 1>;
};
lan_green {
label = "DGND3700v1_3800B:green:lan";
gpios = <&pinctrl 23 1>;
};
power_green {
label = "DGND3700v1_3800B:green:power";
gpios = <&pinctrl 24 1>;
default-state = "on";
};
wifi2g_green {
label = "DGND3700v1_3800B:green:wifi2g";
gpios = <&pinctrl 26 1>;
};
wifi5g_blue {
label = "DGND3700v1_3800B:blue:wifi5g";
gpios = <&pinctrl 27 1>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
linux@20000 {
label = "linux";
reg = <0x020000 0x1e20000>;
};
board_data@1e40000 {
label = "board_data";
reg = <0x1e40000 0x1a0000>;
read-only;
};
nvram@1fe0000 {
label = "nvram";
reg = <0x1fe0000 0x20000>;
};
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pci>;
};
&lsspi {
switch@1 {
compatible = "brcm,bcm53115";
reg = <1>;
spi-max-frequency = <781000>;
lede,alias = "eth0";
ports {
#address-cells = <1>;
#size-cells = <0>;
wan@0 {
reg = <0>;
label = "wan";
};
lan@1 {
reg = <1>;
label = "lan1";
};
lan@2 {
reg = <2>;
label = "lan2";
};
lan@3 {
reg = <3>;
label = "lan3";
};
lan@4 {
reg = <4>;
label = "lan4";
};
cpu@8 {
reg = <8>;
label = "cpu";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};