openwrtv4/target/linux/ramips/dts/WN3000RPV3.dts
Thibaut VARENE 7fb11c8ed2 ramips: add support for Netgear WN3000RPv3
This patch adds support for the Netgear WN3000RPv3
http://www.netgear.com/support/product/wn3000rpv3.aspx

Specifications:
- SoC: MediaTek MT7620A (580MHz, ramips)
- RAM: 32MB DDR
- Storage: 8MB NOR SPI flash
- Wireless: builtin MT7620A, 2x2:2 with u.FL connectors
- Ethernet: 1x100M
- Serial: JP1 header, 57600-8N1
- Stock firmware based on OpenWRT Kamikaze

Like the EX2700, the bootloader expects a secondary image signature,
see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577
This is why the same fakeroot image is used for the WN3000

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-01-18 12:06:16 +01:00

143 lines
2.3 KiB
Text

/* This file is released into the public domain */
/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "ralink,mt7620a-soc";
model = "Netgear WN3000RPv3";
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-leds {
compatible = "gpio-leds";
power_g {
label = "wn3000rpv3:green:power";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
default-state = "on";
};
power_r {
label = "wn3000rpv3:red:power";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
client_g {
label = "wn3000rpv3:green:client";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
client_r {
label = "wn3000rpv3:red:client";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
router_g {
label = "wn3000rpv3:green:router";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
router_r {
label = "wn3000rpv3:red:router";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
wps {
label = "wn3000rpv3:green:wps";
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};
l_arrow {
label = "wn3000rpv3:blue:leftarrow";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
r_arrow {
label = "wn3000rpv3:blue:rightarrow";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&gpio1 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x40000 0x7b0000>;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
&ethernet {
mtd-mac-address = <&art 0x0>;
};
&wmac {
mtd-mac-address = <&art 0x6>;
ralink,mtd-eeprom = <&art 0x1000>;
};
&pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "i2c", "uartf", "spi refclk";
ralink,function = "gpio";
};
};
};