No description
Find a file
2009-08-01 21:29:05 +00:00
docs configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) 2009-07-05 11:17:49 +00:00
include revert 17050 this was not the right way to fix this 2009-08-01 12:10:22 +00:00
package force iptables to be configured with ipv6 enabled (#5586) 2009-08-01 12:10:59 +00:00
scripts Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason. 2009-06-08 21:17:58 +00:00
target ixp4xx: add support for jumbo frames to the ethernet driver 2009-08-01 21:29:05 +00:00
toolchain disable warnings as error in the gdb configuration (#5602) 2009-07-31 14:24:38 +00:00
tools revert r17022, this is not the way to do this 2009-07-26 18:13:03 +00:00
.gitignore add logs/ to .gitignore 2009-04-24 01:04:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857) 2009-07-25 21:45:51 +00:00
feeds.conf.default switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
rules.mk add -L$(TOOLCHAIN_DIR)/lib to the LIBGCC_S variable, if necessary 2009-08-01 21:29:00 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org