openwrtv4/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
Felix Fietkau 4a9d726200 ar8216: Fix problem with AR8337 MAC swap handling
AR8337 supports a configuration bit to swap MAC0 and MAC6.
Currently this is set in general if an AR8337 is detected and causes
issues with devices using an AR8334 (internally an AR8337, just
less chip pins).
And it might even cause issues with AR8337-based devices with
different board designs.

Swapping the MAC's however isn't needed for AR8337 in general.
It's just needed in case of certain board designs (affected devices
seem to be based on Atheros reference board AP135/136-010).
Therefore this configuration bit should be moved to platform data.

The patch includes the needed changes to the device initialization
code of affected devices. Hopefully I didn't miss any ..

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 45970
2015-06-14 17:43:50 +00:00

276 lines
7.3 KiB
C

/*
* ZyXEL NBG6716 board support
*
* Based on the Qualcomm Atheros AP135/AP136 reference board support code
* Copyright (c) 2012 Qualcomm Atheros
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
* Copyright (c) 2013 Andre Valentin <avalentin@marcant.net>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include <linux/platform_device.h>
#include <linux/ar8216_platform.h>
#include <linux/gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/platform/ar934x_nfc.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "common.h"
#include "pci.h"
#include "dev-ap9x-pci.h"
#include "dev-gpio-buttons.h"
#include "dev-eth.h"
#include "dev-leds-gpio.h"
#include "dev-nfc.h"
#include "dev-m25p80.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "nvram.h"
#define NBG6716_GPIO_LED_INTERNET 18
#define NBG6716_GPIO_LED_POWER 15
#define NBG6716_GPIO_LED_USB1 4
#define NBG6716_GPIO_LED_USB2 13
#define NBG6716_GPIO_LED_WIFI2G 19
#define NBG6716_GPIO_LED_WIFI5G 17
#define NBG6716_GPIO_LED_WPS 21
#define NBG6716_GPIO_BTN_RESET 23
#define NBG6716_GPIO_BTN_RFKILL 1
#define NBG6716_GPIO_BTN_USB1 0
#define NBG6716_GPIO_BTN_USB2 14
#define NBG6716_GPIO_BTN_WPS 22
#define NBG6716_GPIO_USB_POWER 16
#define NBG6716_KEYS_POLL_INTERVAL 20 /* msecs */
#define NBG6716_KEYS_DEBOUNCE_INTERVAL (3 * NBG6716_KEYS_POLL_INTERVAL)
#define NBG6716_MAC0_OFFSET 0
#define NBG6716_MAC1_OFFSET 6
#define NBG6716_WMAC_CALDATA_OFFSET 0x1000
#define NBG6716_PCIE_CALDATA_OFFSET 0x5000
static struct gpio_led nbg6716_leds_gpio[] __initdata = {
{
.name = "zyxel:white:internet",
.gpio = NBG6716_GPIO_LED_INTERNET,
.active_low = 1,
},
{
.name = "zyxel:white:power",
.gpio = NBG6716_GPIO_LED_POWER,
.active_low = 1,
},
{
.name = "zyxel:white:usb1",
.gpio = NBG6716_GPIO_LED_USB1,
.active_low = 1,
},
{
.name = "zyxel:white:usb2",
.gpio = NBG6716_GPIO_LED_USB2,
.active_low = 1,
},
{
.name = "zyxel:white:wifi2g",
.gpio = NBG6716_GPIO_LED_WIFI2G,
.active_low = 1,
},
{
.name = "zyxel:white:wifi5g",
.gpio = NBG6716_GPIO_LED_WIFI5G,
.active_low = 1,
},
{
.name = "zyxel:white:wps",
.gpio = NBG6716_GPIO_LED_WPS,
.active_low = 1,
}
};
static struct gpio_keys_button nbg6716_gpio_keys[] __initdata = {
{
.desc = "RESET button",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
.gpio = NBG6716_GPIO_BTN_RESET,
.active_low = 1,
},
{
.desc = "RFKILL button",
.type = EV_SW,
.code = KEY_RFKILL,
.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
.gpio = NBG6716_GPIO_BTN_RFKILL,
.active_low = 0,
},
{
.desc = "USB1 eject button",
.type = EV_KEY,
.code = BTN_1,
.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
.gpio = NBG6716_GPIO_BTN_USB1,
.active_low = 1,
},
{
.desc = "USB2 eject button",
.type = EV_KEY,
.code = BTN_2,
.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
.gpio = NBG6716_GPIO_BTN_USB2,
.active_low = 1,
},
{
.desc = "WPS button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
.gpio = NBG6716_GPIO_BTN_WPS,
.active_low = 1,
},
};
static struct ar8327_pad_cfg nbg6716_ar8327_pad0_cfg;
static struct ar8327_pad_cfg nbg6716_ar8327_pad6_cfg;
static struct ar8327_led_cfg nbg6716_ar8327_led_cfg;
static struct ar8327_platform_data nbg6716_ar8327_data = {
.pad0_cfg = &nbg6716_ar8327_pad0_cfg,
.pad6_cfg = &nbg6716_ar8327_pad6_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
.port6_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
.led_cfg = &nbg6716_ar8327_led_cfg
};
static struct mdio_board_info nbg6716_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &nbg6716_ar8327_data,
},
};
static void nbg6716_get_mac(const char *name, char *mac)
{
u8 *nvram = (u8 *) KSEG1ADDR(0x1f040000);
int err;
err = ath79_nvram_parse_mac_addr(nvram, 0x10000,
name, mac);
if (err)
pr_err("no MAC address found for %s\n", name);
}
static void __init nbg6716_common_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
u8 tmpmac[ETH_ALEN];
ath79_register_m25p80(NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg6716_leds_gpio),
nbg6716_leds_gpio);
ath79_register_gpio_keys_polled(-1, NBG6716_KEYS_POLL_INTERVAL,
ARRAY_SIZE(nbg6716_gpio_keys),
nbg6716_gpio_keys);
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
ath79_register_nfc();
gpio_request_one(NBG6716_GPIO_USB_POWER,
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
"USB power");
ath79_register_usb();
nbg6716_get_mac("ethaddr=", tmpmac);
ath79_register_pci();
ath79_register_wmac(art + NBG6716_WMAC_CALDATA_OFFSET, tmpmac);
ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
ath79_register_mdio(0, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, tmpmac, 2);
ath79_init_mac(ath79_eth1_data.mac_addr, tmpmac, 3);
mdiobus_register_board_info(nbg6716_mdio0_info,
ARRAY_SIZE(nbg6716_mdio0_info));
/* GMAC0 is connected to the RMGII interface */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = BIT(0);
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_register_eth(0);
/* GMAC1 is connected to the SGMII interface */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_register_eth(1);
}
static void __init nbg6716_010_setup(void)
{
/* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
nbg6716_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
nbg6716_ar8327_pad0_cfg.txclk_delay_en = true;
nbg6716_ar8327_pad0_cfg.rxclk_delay_en = true;
nbg6716_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
nbg6716_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
nbg6716_ar8327_pad0_cfg.mac06_exchange_en = true;
/* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
nbg6716_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
nbg6716_ar8327_pad6_cfg.rxclk_delay_en = true;
nbg6716_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
ath79_eth0_pll_data.pll_1000 = 0xa6000000;
ath79_eth1_pll_data.pll_1000 = 0x03000101;
nbg6716_ar8327_led_cfg.open_drain = 0;
nbg6716_ar8327_led_cfg.led_ctrl0 = 0xffb7ffb7;
nbg6716_ar8327_led_cfg.led_ctrl1 = 0xffb7ffb7;
nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7;
nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00;
nbg6716_common_setup();
}
MIPS_MACHINE(ATH79_MACH_NBG6716, "NBG6716",
"Zyxel NBG6716",
nbg6716_010_setup);