193 lines
4.9 KiB
C
193 lines
4.9 KiB
C
/*
|
|
* OpenMesh OM5P-AC support
|
|
*
|
|
* Copyright (C) 2013 Marek Lindner <marek@open-mesh.com>
|
|
* Copyright (C) 2014 Sven Eckelmann <sven@open-mesh.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
#include <linux/i2c-gpio.h>
|
|
#include <linux/platform_data/phy-at803x.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
#include <asm/mach-ath79/ath79.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
#include "pci.h"
|
|
|
|
#define OM5PAC_GPIO_LED_POWER 18
|
|
#define OM5PAC_GPIO_LED_GREEN 21
|
|
#define OM5PAC_GPIO_LED_RED 23
|
|
#define OM5PAC_GPIO_LED_YELLOW 22
|
|
#define OM5PAC_GPIO_LED_LAN 20
|
|
#define OM5PAC_GPIO_LED_WAN 19
|
|
#define OM5PAC_GPIO_I2C_SCL 12
|
|
#define OM5PAC_GPIO_I2C_SDA 11
|
|
|
|
#define OM5PAC_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define OM5PAC_KEYS_DEBOUNCE_INTERVAL (3 * OM5PAC_KEYS_POLL_INTERVAL)
|
|
|
|
#define OM5PAC_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
static struct gpio_led om5pac_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "om5pac:blue:power",
|
|
.gpio = OM5PAC_GPIO_LED_POWER,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "om5pac:red:wifi",
|
|
.gpio = OM5PAC_GPIO_LED_RED,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "om5pac:yellow:wifi",
|
|
.gpio = OM5PAC_GPIO_LED_YELLOW,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "om5pac:green:wifi",
|
|
.gpio = OM5PAC_GPIO_LED_GREEN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "om5pac:blue:lan",
|
|
.gpio = OM5PAC_GPIO_LED_LAN,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "om5pac:blue:wan",
|
|
.gpio = OM5PAC_GPIO_LED_WAN,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct flash_platform_data om5pac_flash_data = {
|
|
.type = "mx25l12805d",
|
|
};
|
|
|
|
static struct i2c_gpio_platform_data om5pac_i2c_device_platdata = {
|
|
.sda_pin = OM5PAC_GPIO_I2C_SDA,
|
|
.scl_pin = OM5PAC_GPIO_I2C_SCL,
|
|
.udelay = 10,
|
|
.sda_is_open_drain = 1,
|
|
.scl_is_open_drain = 1,
|
|
};
|
|
|
|
static struct platform_device om5pac_i2c_device = {
|
|
.name = "i2c-gpio",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &om5pac_i2c_device_platdata,
|
|
},
|
|
};
|
|
|
|
static struct i2c_board_info om5pac_i2c_devs[] __initdata = {
|
|
{
|
|
I2C_BOARD_INFO("tmp423", 0x4c),
|
|
},
|
|
};
|
|
|
|
static struct at803x_platform_data om5pac_at803x_data = {
|
|
.disable_smarteee = 1,
|
|
.enable_rgmii_rx_delay = 1,
|
|
.enable_rgmii_tx_delay = 1,
|
|
};
|
|
|
|
static struct mdio_board_info om5pac_mdio0_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 1,
|
|
.platform_data = &om5pac_at803x_data,
|
|
},
|
|
{
|
|
.bus_id = "ag71xx-mdio.0",
|
|
.phy_addr = 2,
|
|
.platform_data = &om5pac_at803x_data,
|
|
},
|
|
};
|
|
|
|
static void __init om5p_ac_setup_qca955x_eth_cfg(u32 mask,
|
|
unsigned int rxd,
|
|
unsigned int rxdv,
|
|
unsigned int txd,
|
|
unsigned int txe)
|
|
{
|
|
void __iomem *base;
|
|
u32 t;
|
|
|
|
base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
|
|
|
|
t = mask;
|
|
t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT;
|
|
t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT;
|
|
t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT;
|
|
t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT;
|
|
|
|
__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
|
|
|
|
iounmap(base);
|
|
}
|
|
|
|
static void __init om5p_ac_setup(void)
|
|
{
|
|
u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
|
|
u8 mac[6];
|
|
|
|
/* temperature sensor */
|
|
platform_device_register(&om5pac_i2c_device);
|
|
i2c_register_board_info(0, om5pac_i2c_devs,
|
|
ARRAY_SIZE(om5pac_i2c_devs));
|
|
|
|
ath79_gpio_output_select(OM5PAC_GPIO_LED_WAN, QCA955X_GPIO_OUT_GPIO);
|
|
|
|
ath79_register_m25p80(&om5pac_flash_data);
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(om5pac_leds_gpio),
|
|
om5pac_leds_gpio);
|
|
|
|
ath79_init_mac(mac, art, 0x02);
|
|
ath79_register_wmac(art + OM5PAC_WMAC_CALDATA_OFFSET, mac);
|
|
|
|
om5p_ac_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
|
|
ath79_register_mdio(0, 0x0);
|
|
|
|
mdiobus_register_board_info(om5pac_mdio0_info,
|
|
ARRAY_SIZE(om5pac_mdio0_info));
|
|
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00);
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01);
|
|
|
|
/* GMAC0 is connected to the PHY1 */
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth0_data.phy_mask = BIT(1);
|
|
ath79_eth0_pll_data.pll_1000 = 0x82000101;
|
|
ath79_eth0_pll_data.pll_100 = 0x80000101;
|
|
ath79_eth0_pll_data.pll_10 = 0x80001313;
|
|
ath79_register_eth(0);
|
|
|
|
/* GMAC1 is connected to MDIO1 in SGMII mode */
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
|
ath79_eth1_data.phy_mask = BIT(2);
|
|
ath79_eth1_pll_data.pll_1000 = 0x03000101;
|
|
ath79_eth1_pll_data.pll_100 = 0x80000101;
|
|
ath79_eth1_pll_data.pll_10 = 0x80001313;
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_register_eth(1);
|
|
|
|
ath79_register_pci();
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_OM5P_AC, "OM5P-AC", "OpenMesh OM5P AC", om5p_ac_setup);
|