Paul Wassi b23b0fb28b ar71xx: add support for TP-Link TL-WR810N v2 ... TP-Link TL-WR810N v2 is a compact Wi-Fi router with two Ethernet ports. Specification: - QCA9533 (650 MHz) - 32 MB RAM - 8 MB Flash - 300 Mbps Wi-Fi 2.4 GHz - 2x 10/100 Mbps Ethernet (eth0, eth1) - UART on testpads on PCB - 1x LED (GPIO-controlled) - 1x reset/WPS button - 1x slide-switch with 2 GPIO inputs Flash instructions: - Flash as regular firmware update in Web UI - Default: 192.168.0.254 / admin / admin - Select *-factory.bin When holding reset button during power-up, U-Boot requests a file 'wr810nv1_tp_recovery.bin' from TFTP server at 192.168.0.66 Signed-off-by: Paul Wassi <p.wassi@gmx.at>		2017-11-14 22:36:46 +01:00
..
base-files	ar71xx: add support for TP-Link TL-WR810N v2	2017-11-14 22:36:46 +01:00
files	ar71xx: add support for TP-Link TL-WR810N v2	2017-11-14 22:36:46 +01:00
generic	ar71xx: unify CONFIG_CMDLINE	2017-09-28 22:45:39 +02:00
image	ar71xx: add support for TP-Link TL-WR810N v2	2017-11-14 22:36:46 +01:00
mikrotik	ar71xx: add support for Wallys DR342	2017-11-14 22:36:46 +01:00
nand	ar71xx: add support for Wallys DR342	2017-11-14 22:36:46 +01:00
patches-4.4	kernel: bump 4.4 to 4.4.91	2017-10-08 20:51:03 +03:00
patches-4.9	ar71xx: fix regression in 74x164 initialization with 4.9	2017-11-10 00:53:10 +01:00
config-4.4	ar71xx: add support for TP-Link TL-WR810N v2	2017-11-14 22:36:46 +01:00
config-4.9	ar71xx: add support for TP-Link TL-WR810N v2	2017-11-14 22:36:46 +01:00
Makefile	ar71xx: use kernel 4.9 by default	2017-10-22 15:22:51 +02:00
modules.mk	ar71xx: add LED driver NU801	2015-12-11 15:04:57 +00:00