openwrtv4/target/linux/lantiq/base-files/etc/board.d/01_leds
John Crispin 787120e3a3 lantiq: fix led setup after switch to uci-defaults-new.sh
The switch to uci-defaults-new.sh revealed a bug in the former used
uci-defaults.sh, which failed to add leds with colons in the led name.

This bug isn't any longer present in uci-defaults-new.sh and therefore
all via DT defined leds will be added to /etc/config/system with their initial
on/off state, regardless whether they are already added by the board specific
led mappings.

This results for a BTHOMEHUBV5A into the following led configuration:

- soc:blue:power is added as led_power with the initial state "switched on"
- soc:blue:power is added as led_soc_blue_power with the initial state "switched off"

With the final result of a switched off power led after boot.

The only led that needs to be added is the BTHOMEHUBV5A specific dimmed led.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47850
2015-12-11 15:05:30 +00:00

80 lines
3.1 KiB
Bash
Executable file

#!/bin/sh
#
# Copyright (C) 2011-2015 OpenWrt.org
# based on ar71xx
#
. /lib/functions/uci-defaults-new.sh
. /lib/functions/lantiq.sh
board_config_update
[ -e "/sys/class/leds/wifi" ] && ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0tpt"
[ -e "/sys/class/leds/usb" ] && ucidef_set_led_usbdev "usb" "usb" "usb" "1-1"
[ -e "/sys/class/leds/usb2" ] && ucidef_set_led_usbdev "usb2" "usb2" "usb2" "2-1"
[ -e "/sys/class/leds/internet" ] && ucidef_set_led_netdev "internet" "internet" "internet" "pppoe-wan"
board=$(lantiq_board_name)
case "$board" in
VG3503J)
ucidef_set_led_netdev "vdsl" "vdsl" "bt:green:dsl" "ptm0"
;;
BTHOMEHUBV2B)
ucidef_set_led_default "power" "power" "soc:blue:power" "1"
# ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0radio"
ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
ucidef_set_led_usbdev "usb" "usb" "soc:blue:phone" "1-1"
;;
BTHOMEHUBV3A)
ucidef_set_led_default "power" "power" "soc:blue:power" "1"
ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
;;
BTHOMEHUBV5A)
ucidef_set_led_default "power" "power" "soc:blue:power" "1"
ucidef_set_led_wlan "wifi" "wifi" "soc:blue:wireless" "phy0tpt"
ucidef_set_led_netdev "internet" "internet" "soc:blue:broadband" "pppoa-wan"
ucidef_set_led_default "dimmed" "dimmed" "dimmed" "0"
;;
VGV7510KW22)
ucidef_set_led_default "power" "power" "power" "1"
ucidef_set_led_default "power2" "power2" "power2" "0"
ucidef_set_led_wlan "wifi" "wifi" "wifi" "phy0radio"
ucidef_set_led_netdev "dsl" "dsl" "dsl" "nas0"
ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
;;
VGV7519)
ucidef_set_led_default "power" "power" "power" "0"
ucidef_set_led_default "power2" "power2" "power2" "1"
ucidef_set_led_wlan "wireless_yellow" "wireless_yellow" "wireless_yellow" "phy0radio"
ucidef_set_led_netdev "internet_yellow" "internet_yellow" "internet_yellow" "nas0"
ucidef_set_led_netdev "broadband_yellow" "broadband_yellow" "broadband_yellow" "pppoe-wan"
;;
P2812HNUF*)
ucidef_set_led_default "power" "power" "power" "0"
ucidef_set_led_default "power2" "power2" "power2" "1"
ucidef_set_led_wlan "wireless_green" "wireless_green" "wireless_green" "phy0radio"
ucidef_set_led_netdev "dsl" "dsl" "dsl" "nas0"
ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
;;
ARV7519RW22)
ucidef_set_led_default "power" "power" "power" "1"
ucidef_set_led_netdev "internet_green" "internet_green" "internet_green" "pppoe-wan"
ucidef_set_led_netdev "lan" "lan" "lan" "eth0.1"
;;
ARV8539PW22)
ucidef_set_led_default "power" "power" "soc:green:power" "1"
ucidef_set_led_default "power2" "power2" "soc:red:power" "0"
ucidef_set_led_wlan "wifi" "wifi" "soc:green:wireless" "phy0tpt"
ucidef_set_led_netdev "dsl" "dsl" "soc:green:dsl" "nas0"
ucidef_set_led_netdev "online" "online" "soc:green:online" "pppoe-wan"
;;
*)
;;
esac
board_config_flush
exit 0