openwrtv4/target/linux/layerscape/patches-4.4/0058-PCI-designware-Move-Root-Complex-setup-code-to-dw_pc.patch
Yutang Jiang c6c731fe31 layerscape: add 64b/32b target for ls1043ardb device
Add support for NXP layerscape ls1043ardb 64b/32b Dev board.

LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores.
ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC,
I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc.

64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from
NXP QorIQ SDK release.

All of 4.4 kernel patches porting from SDK release or upstream.

QorIQ SDK ISOs can be downloaded from this location:
http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-10-31 17:00:10 +01:00

109 lines
4 KiB
Diff

From 892a427f8a2b25b561298941cf1fc0373a98b269 Mon Sep 17 00:00:00 2001
From: Jisheng Zhang <jszhang@marvell.com>
Date: Wed, 16 Mar 2016 19:40:33 +0800
Subject: [PATCH 58/70] PCI: designware: Move Root Complex setup code to
dw_pcie_setup_rc()
dw_pcie_host_init() looks up host bridge resources, ioremaps them, creates
IRQ domains, and enumerates devices below the bridge. dw_pcie_setup_rc()
programs the Root Complex registers. The Root Complex may lose power
during suspend-to-RAM, and when we resume, we want to redo the latter but
not the former.
Move some Root Complex programming from dw_pcie_host_init() to
dw_pcie_setup_rc() where it belongs. DesignWare-based drivers can call
dw_pcie_setup_rc() in their resume paths.
[Niklas Cassel <niklas.cassel@axis.com>: This change moves outbound ATU
programming, which uses pp->mem_base, to dw_pcie_setup_rc(). Apply the
dra7xx pp->mem_base update before calling dw_pcie_setup_rc().]
[bhelgaas: changelog, fold in dra7xx fix from Niklas]
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
---
drivers/pci/host/pci-dra7xx.c | 4 ++--
drivers/pci/host/pcie-designware.c | 39 ++++++++++++++++++------------------
2 files changed, 21 insertions(+), 22 deletions(-)
--- a/drivers/pci/host/pci-dra7xx.c
+++ b/drivers/pci/host/pci-dra7xx.c
@@ -142,13 +142,13 @@ static void dra7xx_pcie_enable_interrupt
static void dra7xx_pcie_host_init(struct pcie_port *pp)
{
- dw_pcie_setup_rc(pp);
-
pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR;
pp->mem_base &= DRA7XX_CPU_TO_BUS_ADDR;
pp->cfg0_base &= DRA7XX_CPU_TO_BUS_ADDR;
pp->cfg1_base &= DRA7XX_CPU_TO_BUS_ADDR;
+ dw_pcie_setup_rc(pp);
+
dra7xx_pcie_establish_link(pp);
if (IS_ENABLED(CONFIG_PCI_MSI))
dw_pcie_msi_init(pp);
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -434,7 +434,6 @@ int dw_pcie_host_init(struct pcie_port *
struct platform_device *pdev = to_platform_device(pp->dev);
struct pci_bus *bus, *child;
struct resource *cfg_res;
- u32 val;
int i, ret;
LIST_HEAD(res);
struct resource_entry *win;
@@ -544,25 +543,6 @@ int dw_pcie_host_init(struct pcie_port *
if (pp->ops->host_init)
pp->ops->host_init(pp);
- /*
- * If the platform provides ->rd_other_conf, it means the platform
- * uses its own address translation component rather than ATU, so
- * we should not program the ATU here.
- */
- if (!pp->ops->rd_other_conf)
- dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1,
- PCIE_ATU_TYPE_MEM, pp->mem_base,
- pp->mem_bus_addr, pp->mem_size);
-
- dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
-
- /* program correct class for RC */
- dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
-
- dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
- val |= PORT_LOGIC_SPEED_CHANGE;
- dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
-
pp->root_bus_nr = pp->busn->start;
if (IS_ENABLED(CONFIG_PCI_MSI)) {
bus = pci_scan_root_bus_msi(pp->dev, pp->root_bus_nr,
@@ -800,6 +780,25 @@ void dw_pcie_setup_rc(struct pcie_port *
val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER | PCI_COMMAND_SERR;
dw_pcie_writel_rc(pp, val, PCI_COMMAND);
+
+ /*
+ * If the platform provides ->rd_other_conf, it means the platform
+ * uses its own address translation component rather than ATU, so
+ * we should not program the ATU here.
+ */
+ if (!pp->ops->rd_other_conf)
+ dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1,
+ PCIE_ATU_TYPE_MEM, pp->mem_base,
+ pp->mem_bus_addr, pp->mem_size);
+
+ dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0);
+
+ /* program correct class for RC */
+ dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI);
+
+ dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val);
+ val |= PORT_LOGIC_SPEED_CHANGE;
+ dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
}
MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");