openwrtv4/target/linux/brcm63xx/dts/bcm6368.dtsi
Jonas Gorski a3384088a2 brcm63xx: add uart nodes
Now that we can register uarts through device-tree, add them to the dtsi
files.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-12-16 12:57:05 +01:00

319 lines
6.1 KiB
Text

/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "brcm,bcm6368";
aliases {
pflash = &pflash;
pinctrl = &pinctrl;
serial0 = &uart0;
serial1 = &uart1;
spi0 = &lsspi;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "brcm,bmips4350", "mips,mips4Kc";
device_type = "cpu";
reg = <0>;
};
cpu@1 {
compatible = "brcm,bmips4350", "mips,mips4Kc";
device_type = "cpu";
reg = <1>;
};
};
cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
interrupt-controller;
#interrupt-cells = <1>;
};
memory { device_type = "memory"; reg = <0 0>; };
ubus@10000000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
interrupt-parent = <&periph_intc>;
ext_intc0: interrupt-controller@10000018 {
compatible = "brcm,bcm6345-ext-intc";
reg = <0x10000018 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <20>, <21>, <22>, <23>;
};
ext_intc1: interrupt-controller@1000001c {
compatible = "brcm,bcm6345-ext-intc";
reg = <0x1000001c 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <24>, <25>;
};
periph_intc: interrupt-controller@10000020 {
compatible = "brcm,bcm6345-l1-intc";
reg = <0x10000020 0x10>,
<0x10000030 0x10>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>, <3>;
};
pinctrl: pin-controller@10000080 {
compatible = "brcm,bcm6368-pinctrl";
reg = <0x10000080 0x8>,
<0x10000088 0x8>,
<0x10000098 0x4>;
reg-names = "dirout", "dat", "mode";
brcm,gpiobasemode = <&gpiobasemode>;
gpio-controller;
#gpio-cells = <2>;
interrupts-extended = <&ext_intc1 0 0>,
<&ext_intc1 1 0>,
<&ext_intc0 0 0>,
<&ext_intc0 1 0>,
<&ext_intc0 2 0>,
<&ext_intc0 3 0>;
interrupt-names = "gpio32", "gpio33", "gpio34", "gpio35",
"gpio36", "gpio37";
pinctrl_analog_afe_0: analog_afe_0 {
function = "analog_afe_0";
pins = "gpio0";
};
pinctrl_analog_afe_1: analog_afe_1 {
function = "analog_afe_1";
pins = "gpio1";
};
pinctrl_sys_irq: sys_irq {
function = "sys_irq";
pins = "gpio2";
};
pinctrl_serial_led: serial_led {
pinctrl_serial_led_data: serial_led_data {
function = "serial_led_data";
pins = "gpio3";
};
pinctrl_serial_led_clk: serial_led_clk {
function = "serial_led_clk";
pins = "gpio4";
};
};
pinctrl_inet_led: inet_led {
function = "inet_led";
pins = "gpio5";
};
pinctrl_ephy0_led: ephy0_led {
function = "ephy0_led";
pins = "gpio6";
};
pinctrl_ephy1_led: ephy1_led {
function = "ephy1_led";
pins = "gpio7";
};
pinctrl_ephy2_led: ephy2_led {
function = "ephy2_led";
pins = "gpio8";
};
pinctrl_ephy3_led: ephy3_led {
function = "ephy3_led";
pins = "gpio9";
};
pinctrl_robosw_led_data: robosw_led_data {
function = "robosw_led_data";
pins = "gpio10";
};
pinctrl_robosw_led_clk: robosw_led_clk {
function = "robosw_led_clk";
pins = "gpio11";
};
pinctrl_robosw_led0: robosw_led0 {
function = "robosw_led0";
pins = "gpio12";
};
pinctrl_robosw_led1: robosw_led1 {
function = "robosw_led1";
pins = "gpio13";
};
pinctrl_usb_device_led: usb_device_led {
function = "usb_device_led";
pins = "gpio14";
};
pinctrl_pci: pci {
pinctrl_pci_req1: pci_req1 {
function = "pci_req1";
pins = "gpio16";
};
pinctrl_pci_gnt1: pci_gnt1 {
function = "pci_gnt1";
pins = "gpio17";
};
pinctrl_pci_intb: pci_intb {
function = "pci_intb";
pins = "gpio18";
};
pinctrl_pci_req0: pci_req0 {
function = "pci_req0";
pins = "gpio19";
};
pinctrl_pci_gnt0: pci_gnt0 {
function = "pci_gnt0";
pins = "gpio20";
};
};
pinctrl_pcmcia: pcmcia {
pinctrl_pcmcia_cd1: pcmcia_cd1 {
function = "pcmcia_cd1";
pins = "gpio22";
};
pinctrl_pcmcia_cd2: pcmcia_cd2 {
function = "pcmcia_cd2";
pins = "gpio23";
};
pinctrl_pcmcia_vs1: pcmcia_vs1 {
function = "pcmcia_vs1";
pins = "gpio24";
};
pinctrl_pcmcia_vs2: pcmcia_vs2 {
function = "pcmcia_vs2";
pins = "gpio25";
};
};
pinctrl_ebi_cs2: ebi_cs2 {
function = "ebi_cs2";
pins = "gpio26";
};
pinctrl_ebi_cs3: ebi_cs3 {
function = "ebi_cs2";
pins = "gpio27";
};
pinctrl_spi_cs2: spi_cs2 {
function = "spi_cs2";
pins = "gpio28";
};
pinctrl_spi_cs3: spi_cs3 {
function = "spi_cs3";
pins = "gpio29";
};
pinctrl_spi_cs4: spi_cs4 {
function = "spi_cs4";
pins = "gpio30";
};
pinctrl_spi_cs5: spi_cs5 {
function = "spi_cs5";
pins = "gpio31";
};
pinctrl_uart1: uart1 {
function = "uart1";
group = "uart1_grp";
};
};
gpiobasemode: gpiobasemode@100000b8 {
compatible = "brcm,bcm6368-gpiobasemode", "syscon";
reg = <0x100000b8 0x4>;
};
leds: led-controller@100000d0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6358-leds";
reg = <0x100000d0 0x8>;
status = "disabled";
};
uart0: serial@10000100 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000100 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <2>;
/* clocks = <&periph_clk>; */
/* clock-names = "refclk"; */
status = "disabled";
};
uart1: serial@10000120 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000120 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <3>;
/* clocks = <&periph_clk>; */
/* clock-names = "refclk"; */
status = "disabled";
};
lsspi: spi@10000800 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "brcm,bcm6358-spi";
reg = <0x10000800 0x70c>;
interrupts = <1>;
/* clocks = <&clkctl 9>; */
};
};
pflash: nor@18000000 {
compatible = "cfi-flash";
reg = <0x18000000 0x2000000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
};