openwrtv4/package/kernel/mac80211/patches/344-0008-brcmfmac-use-device-memsize-config-from-fw-if-define.patch
Rafał Miłecki f5317ed5d2 mac80211: backport brcmfmac patchset with driver setting concept
This prepares brcmfmac for better country handling and fixes BCM4360
support which was always failing with:
[   13.249195] brcmfmac: brcmf_pcie_download_fw_nvram: FW failed to initialize

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48959
2016-03-07 22:37:09 +00:00

73 lines
2.4 KiB
Diff

From: Hante Meuleman <meuleman@broadcom.com>
Date: Wed, 17 Feb 2016 11:26:57 +0100
Subject: [PATCH] brcmfmac: use device memsize config from fw if defined
Newer type pcie devices have memory which get shared between fw and
hw. The division of this memory is done firmware compile time. As a
result the ramsize as used by driver needs to be adjusted for this.
This is done by reading the memory size from the firmware.
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -207,6 +207,10 @@ static struct brcmf_firmware_mapping brc
#define BRCMF_PCIE_CFGREG_REG_BAR3_CONFIG 0x4F4
#define BRCMF_PCIE_LINK_STATUS_CTRL_ASPM_ENAB 3
+/* Magic number at a magic location to find RAM size */
+#define BRCMF_RAMSIZE_MAGIC 0x534d4152 /* SMAR */
+#define BRCMF_RAMSIZE_OFFSET 0x6c
+
struct brcmf_pcie_console {
u32 base_addr;
@@ -1412,6 +1416,28 @@ static const struct brcmf_bus_ops brcmf_
};
+static void
+brcmf_pcie_adjust_ramsize(struct brcmf_pciedev_info *devinfo, u8 *data,
+ u32 data_len)
+{
+ __le32 *field;
+ u32 newsize;
+
+ if (data_len < BRCMF_RAMSIZE_OFFSET + 8)
+ return;
+
+ field = (__le32 *)&data[BRCMF_RAMSIZE_OFFSET];
+ if (le32_to_cpup(field) != BRCMF_RAMSIZE_MAGIC)
+ return;
+ field++;
+ newsize = le32_to_cpup(field);
+
+ brcmf_dbg(PCIE, "Found ramsize info in FW, adjusting to 0x%x\n",
+ newsize);
+ devinfo->ci->ramsize = newsize;
+}
+
+
static int
brcmf_pcie_init_share_ram_info(struct brcmf_pciedev_info *devinfo,
u32 sharedram_addr)
@@ -1694,6 +1720,13 @@ static void brcmf_pcie_setup(struct devi
brcmf_pcie_attach(devinfo);
+ /* Some of the firmwares have the size of the memory of the device
+ * defined inside the firmware. This is because part of the memory in
+ * the device is shared and the devision is determined by FW. Parse
+ * the firmware and adjust the chip memory size now.
+ */
+ brcmf_pcie_adjust_ramsize(devinfo, (u8 *)fw->data, fw->size);
+
ret = brcmf_pcie_download_fw_nvram(devinfo, fw, nvram, nvram_len);
if (ret)
goto fail;