acafbac4b3
Obviously not all GPIO controller allow to change the direction. The issue is around since the beginning of the script but only due to the recent changes error messages are more visible. Add a check if a change of the direction is supported by the GPIO controller and fallback to setting only the value if not. Fixes: FS#1271 Signed-off-by: Mathias Kresin <dev@kresin.me>
205 lines
6.3 KiB
Makefile
205 lines
6.3 KiB
Makefile
#
|
|
# Copyright (C) 2007-2016 OpenWrt.org
|
|
# Copyright (C) 2010 Vertical Communications
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/kernel.mk
|
|
include $(INCLUDE_DIR)/version.mk
|
|
include $(INCLUDE_DIR)/feeds.mk
|
|
|
|
PKG_NAME:=base-files
|
|
PKG_RELEASE:=184
|
|
PKG_FLAGS:=nonshared
|
|
|
|
PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/
|
|
PKG_BUILD_DEPENDS:=usign/host
|
|
PKG_LICENSE:=GPL-2.0
|
|
|
|
# Extend depends from version.mk
|
|
PKG_CONFIG_DEPENDS += \
|
|
CONFIG_SIGNED_PACKAGES CONFIG_TARGET_INIT_PATH CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE \
|
|
CONFIG_NAND_SUPPORT \
|
|
CONFIG_CLEAN_IPKG \
|
|
CONFIG_PER_FEED_REPO \
|
|
CONFIG_PER_FEED_REPO_ADD_DISABLED \
|
|
CONFIG_PER_FEED_REPO_ADD_COMMENTED \
|
|
$(foreach feed,$(FEEDS_INSTALLED),CONFIG_FEED_$(feed))
|
|
|
|
include $(INCLUDE_DIR)/package.mk
|
|
|
|
ifneq ($(DUMP),1)
|
|
STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(CONFIG_TARGET_INIT_PATH) | mkhash md5)
|
|
TARGET:=-$(BOARD)
|
|
endif
|
|
|
|
define Package/base-files
|
|
SECTION:=base
|
|
CATEGORY:=Base system
|
|
DEPENDS:=+netifd +libc +procd +jsonfilter +SIGNED_PACKAGES:usign +SIGNED_PACKAGES:lede-keyring +NAND_SUPPORT:ubi-utils +fstools +fwtool
|
|
TITLE:=Base filesystem for OpenWrt
|
|
URL:=http://openwrt.org/
|
|
VERSION:=$(PKG_RELEASE)-$(REVISION)
|
|
endef
|
|
|
|
define Package/base-files/conffiles
|
|
/etc/config/
|
|
/etc/config/network
|
|
/etc/config/system
|
|
/etc/crontabs/
|
|
/etc/dropbear/
|
|
/etc/group
|
|
/etc/hosts
|
|
/etc/inittab
|
|
/etc/iproute2/rt_protos
|
|
/etc/iproute2/rt_tables
|
|
/etc/passwd
|
|
/etc/profile
|
|
/etc/profile.d
|
|
/etc/protocols
|
|
/etc/rc.local
|
|
/etc/services
|
|
/etc/shadow
|
|
/etc/shells
|
|
/etc/sysctl.conf
|
|
/etc/sysctl.d/
|
|
/etc/sysctl.d/local.conf
|
|
/etc/sysupgrade.conf
|
|
$(call $(TARGET)/conffiles)
|
|
endef
|
|
|
|
define Package/base-files/description
|
|
This package contains a base filesystem and system scripts for OpenWrt.
|
|
endef
|
|
|
|
define ImageConfigOptions
|
|
mkdir -p $(1)/lib/preinit
|
|
echo 'pi_suppress_stderr="$(CONFIG_TARGET_PREINIT_SUPPRESS_STDERR)"' >$(1)/lib/preinit/00_preinit.conf
|
|
echo 'fs_failsafe_wait_timeout=$(if $(CONFIG_TARGET_PREINIT_TIMEOUT),$(CONFIG_TARGET_PREINIT_TIMEOUT),2)' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_init_path="$(TARGET_INIT_PATH)"' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_init_env=$(if $(CONFIG_TARGET_INIT_ENV),$(CONFIG_TARGET_INIT_ENV),"")' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_init_cmd=$(if $(CONFIG_TARGET_INIT_CMD),$(CONFIG_TARGET_INIT_CMD),"/sbin/init")' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_init_suppress_stderr="$(CONFIG_TARGET_INIT_SUPPRESS_STDERR)"' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_ifname=$(if $(CONFIG_TARGET_PREINIT_IFNAME),$(CONFIG_TARGET_PREINIT_IFNAME),"")' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_ip=$(if $(CONFIG_TARGET_PREINIT_IP),$(CONFIG_TARGET_PREINIT_IP),"192.168.1.1")' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_netmask=$(if $(CONFIG_TARGET_PREINIT_NETMASK),$(CONFIG_TARGET_PREINIT_NETMASK),"255.255.255.0")' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_broadcast=$(if $(CONFIG_TARGET_PREINIT_BROADCAST),$(CONFIG_TARGET_PREINIT_BROADCAST),"192.168.1.255")' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_preinit_net_messages="$(CONFIG_TARGET_PREINIT_SHOW_NETMSG)"' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_preinit_no_failsafe_netmsg="$(CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG)"' >>$(1)/lib/preinit/00_preinit.conf
|
|
echo 'pi_preinit_no_failsafe="$(CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE)"' >>$(1)/lib/preinit/00_preinit.conf
|
|
endef
|
|
|
|
define Build/Prepare
|
|
mkdir -p $(PKG_BUILD_DIR)
|
|
endef
|
|
|
|
define Build/Compile/Default
|
|
|
|
endef
|
|
Build/Compile = $(Build/Compile/Default)
|
|
|
|
ifdef CONFIG_SIGNED_PACKAGES
|
|
define Build/Configure
|
|
[ -s $(BUILD_KEY) -a -s $(BUILD_KEY).pub ] || \
|
|
$(STAGING_DIR_HOST)/bin/usign -G -s $(BUILD_KEY) -p $(BUILD_KEY).pub -c "Local build key"
|
|
|
|
endef
|
|
|
|
define Package/base-files/install-key
|
|
mkdir -p $(1)/etc/opkg/keys
|
|
$(CP) $(BUILD_KEY).pub $(1)/etc/opkg/keys/`$(STAGING_DIR_HOST)/bin/usign -F -p $(BUILD_KEY).pub`
|
|
|
|
endef
|
|
endif
|
|
|
|
ifeq ($(CONFIG_NAND_SUPPORT),)
|
|
define Package/base-files/nand-support
|
|
rm -f $(1)/lib/upgrade/nand.sh
|
|
endef
|
|
endif
|
|
|
|
define Package/base-files/install
|
|
$(CP) ./files/* $(1)/
|
|
$(Package/base-files/install-key)
|
|
$(Package/base-files/nand-support)
|
|
if [ -d $(GENERIC_PLATFORM_DIR)/base-files/. ]; then \
|
|
$(CP) $(GENERIC_PLATFORM_DIR)/base-files/* $(1)/; \
|
|
fi
|
|
if [ -d $(PLATFORM_DIR)/base-files/. ]; then \
|
|
$(CP) $(PLATFORM_DIR)/base-files/* $(1)/; \
|
|
fi
|
|
$(if $(filter-out $(PLATFORM_DIR),$(PLATFORM_SUBDIR)), \
|
|
if [ -d $(PLATFORM_SUBDIR)/base-files/. ]; then \
|
|
$(CP) $(PLATFORM_SUBDIR)/base-files/* $(1)/; \
|
|
fi; \
|
|
)
|
|
|
|
$(VERSION_SED) \
|
|
$(1)/etc/banner \
|
|
$(1)/etc/openwrt_version \
|
|
$(1)/usr/lib/os-release
|
|
|
|
$(VERSION_SED_SCRIPT) \
|
|
$(1)/etc/openwrt_release \
|
|
$(1)/etc/device_info \
|
|
$(1)/usr/lib/os-release
|
|
|
|
$(SED) "s#%PATH%#$(TARGET_INIT_PATH)#g" \
|
|
$(1)/sbin/hotplug-call \
|
|
$(1)/etc/preinit \
|
|
$(1)/etc/profile
|
|
|
|
mkdir -p $(1)/CONTROL
|
|
mkdir -p $(1)/dev
|
|
mkdir -p $(1)/etc/config
|
|
mkdir -p $(1)/etc/crontabs
|
|
mkdir -p $(1)/etc/rc.d
|
|
mkdir -p $(1)/overlay
|
|
mkdir -p $(1)/lib/firmware
|
|
$(if $(LIB_SUFFIX),-$(LN) lib $(1)/lib$(LIB_SUFFIX))
|
|
mkdir -p $(1)/mnt
|
|
mkdir -p $(1)/proc
|
|
mkdir -p $(1)/tmp
|
|
mkdir -p $(1)/usr/lib
|
|
$(if $(LIB_SUFFIX),-$(LN) lib $(1)/usr/lib$(LIB_SUFFIX))
|
|
mkdir -p $(1)/usr/bin
|
|
mkdir -p $(1)/sys
|
|
mkdir -p $(1)/www
|
|
mkdir -p $(1)/root
|
|
$(LN) /proc/mounts $(1)/etc/mtab
|
|
rm -f $(1)/var
|
|
$(LN) /tmp $(1)/var
|
|
mkdir -p $(1)/etc
|
|
$(LN) /tmp/resolv.conf /tmp/TZ /tmp/localtime $(1)/etc/
|
|
|
|
chmod 0600 $(1)/etc/shadow
|
|
chmod 1777 $(1)/tmp
|
|
|
|
$(call ImageConfigOptions,$(1))
|
|
$(call Package/base-files/install-target,$(1))
|
|
for conffile in $(1)/etc/config/*; do \
|
|
if [ -f "$$$$conffile" ]; then \
|
|
grep "$$$${conffile##$(1)}" $(1)/CONTROL/conffiles || \
|
|
echo "$$$${conffile##$(1)}" >> $(1)/CONTROL/conffiles; \
|
|
fi \
|
|
done
|
|
|
|
$(if $(CONFIG_INCLUDE_CONFIG), \
|
|
echo -e "# Build configuration for board $(BOARD)/$(SUBTARGET)/$(PROFILE)\n" >$(1)/etc/build.config; \
|
|
cat $(BIN_DIR)/config.seed >>$(1)/etc/build.config)
|
|
|
|
$(if $(CONFIG_CLEAN_IPKG),, \
|
|
mkdir -p $(1)/etc/opkg; \
|
|
$(call FeedSourcesAppend,$(1)/etc/opkg/distfeeds.conf); \
|
|
$(VERSION_SED) $(1)/etc/opkg/distfeeds.conf)
|
|
endef
|
|
|
|
ifneq ($(DUMP),1)
|
|
-include $(PLATFORM_DIR)/base-files.mk
|
|
-include $(PLATFORM_SUBDIR)/base-files.mk
|
|
endif
|
|
|
|
$(eval $(call BuildPackage,base-files))
|